The short answer: long division repeats four steps — divide, multiply, subtract, bring down — until no digits remain. For 4,785 ÷ 6, the quotient is 797 with remainder 3, since 6 × 797 + 3 = 4,785. To continue past the remainder, write a decimal point and bring down zeros: 3 ÷ 8 = 0.375, while 1 ÷ 3 = 0.333… repeats forever.

Key takeaways

  • Every step respects place value. The quotient digits sit above the digits they divide.
  • Remainders must be smaller than the divisor. A remainder of 6 or more when dividing by 6 means the quotient digit was too small.
  • Appending zeros continues the division into decimals. The decimal point in the quotient aligns with the dividend.
  • Repeating remainders produce repeating decimals. A cycle in the remainders means a cycle in the digits.
  • Decimal divisors are removed by shifting both numbers. 12.6 ÷ 0.3 = 126 ÷ 3.
  • Check with multiplication: divisor × quotient + remainder = dividend.

The long-division algorithm

Long division handles a division that cannot be done in one step by working from left to right, one place value at a time. At each position: divide the current number by the divisor to choose a quotient digit, multiply that digit by the divisor, subtract to find the remainder, and bring down the next digit. The process stops when no digits remain or when the desired decimal precision is reached.

The quotient is written above the dividend, with each digit aligned over the last digit of the number being divided. That alignment is not cosmetic: it records whether the digit represents thousands, hundreds, tens, or units. Most long-division errors are place-value errors, not arithmetic errors.

Worked example: 4,785 ÷ 6

Six does not divide 4, so start with 47. Six goes into 47 seven times: 6 × 7 = 42, and 47 − 42 = 5. Bring down the 8 to make 58. Six goes into 58 nine times: 6 × 9 = 54, and 58 − 54 = 4. Bring down the 5 to make 45. Six goes into 45 seven times: 6 × 7 = 42, and 45 − 42 = 3.

No digits remain, so the quotient is 797 and the remainder is 3. Check: 6 × 797 = 4,782, and 4,782 + 3 = 4,785. The remainder as a fraction is 3/6 = 0.5, so the exact value is 797.5. Keeping the remainder as a whole number and as a fraction are both valid; the context decides which is useful.

Dividend, divisor, quotient, and remainder

The division identity ties the four quantities together:

dividend = divisor × quotient + remainder
0 ≤ remainder < divisor

The inequality is a built-in check. When dividing by 6, a remainder of 6 or more is impossible because another group of 6 could be formed. If you get one, the quotient digit is too small.

For 4,785 ÷ 6, the identity reads 4,785 = 6 × 797 + 3. For 47 students riding in vans that hold 9, 47 = 9 × 5 + 2: five full vans and 2 students left over, so six vans are needed. The arithmetic remainder is 2, but the practical answer rounds up. Interpret the remainder in the units of the problem.

Continuing into decimals

When the remainder is nonzero and an exact decimal is wanted, place a decimal point after the quotient and bring down a zero. Each appended zero adds one decimal place. For 3 ÷ 8: 8 does not divide 3, so write 0. and bring down a zero to make 30. Eight goes into 30 three times, remainder 6. Bring down another zero to make 60; eight goes in seven times, remainder 4. Bring down a zero to make 40; eight goes in five times, remainder 0. The quotient is 0.375.

For 4,785 ÷ 6, continuing gives 797.5. The decimal point in the quotient lines up with the decimal point in the dividend, which is why the alignment matters. Stop when the remainder is zero for a terminating decimal, or when the required number of decimal places is reached for a rounded answer.

Dividing decimals

To divide by a decimal, shift the decimal point in both the divisor and the dividend by the same number of places until the divisor is a whole number. Shifting both numbers is equivalent to multiplying both by a power of ten, which does not change the quotient.

For 12.6 ÷ 0.3, shift one place: 126 ÷ 3 = 42. For 0.75 ÷ 0.25, shift two places: 75 ÷ 25 = 3. For 4.5 ÷ 0.09, shift two places: 450 ÷ 9 = 50. If the dividend runs out of digits during the shift, append zeros.

Estimate before computing to catch place-value errors. 12.6 ÷ 0.3 is about 12 ÷ 0.3 = 40, so 42 is plausible; an answer of 4.2 or 420 signals a shift error. Estimation is the cheapest check available.

Repeating decimals and remainder cycles

Some divisions never reach a zero remainder. For 7 ÷ 12: 70 ÷ 12 = 5 remainder 10, 100 ÷ 12 = 8 remainder 4, 40 ÷ 12 = 3 remainder 4. The remainder 4 repeats, so the digit 3 repeats forever: 0.58333….

For 1 ÷ 7, the remainders cycle through 3, 2, 6, 4, 5, 1 and the digits are 0.142857142857…, a cycle of length 6. The cycle must repeat within at most divisor − 1 steps, because there are only that many possible nonzero remainders. A repeated remainder is the signal that the decimal has entered its repeating block.

Write repeating decimals with a bar over the repeating block, such as 0.583̄ for 0.58333…, or 0.142857 with a bar over all six digits. Truncating to a few places is an approximation; the exact value is the fraction you started with.

Checking the answer

Multiply the quotient by the divisor and add the remainder. For 4,785 ÷ 6, 6 × 797 + 3 = 4,785. For a decimal answer, multiply back to recover the dividend: 0.375 × 8 = 3. For a rounded answer, the check will be close rather than exact, and the difference should be no larger than the rounding error.

Digit-sum checks and casting out nines can catch some arithmetic slips, but they are not conclusive. Estimation checks magnitude, while multiplication checks the exact identity. Use both: one catches a wrong digit, the other catches a misplaced decimal point.

Polynomial long division

The same four steps extend to polynomials. To divide x² + 3x + 2 by x + 1, divide the leading term x² by x to get x, multiply x(x + 1) = x² + x, and subtract to get 2x + 2. Divide 2x by x to get 2, multiply 2(x + 1) = 2x + 2, and subtract to get 0. The quotient is x + 2 with no remainder, matching (x + 1)(x + 2).

Polynomial division has the same identity, f(x) = d(x)q(x) + r(x), with the degree of the remainder less than the degree of the divisor. The arithmetic is different, but the structure — divide, multiply, subtract, bring down — is identical, which is why learning the integer algorithm pays off later.

Common mistakes

  • Misaligning quotient digits. Write each digit above the last digit of the number being divided.
  • Dropping a zero in the quotient. If the divisor does not fit, write 0 and bring down the next digit.
  • Leaving a remainder larger than the divisor. Increase the quotient digit.
  • Shifting only one number in a decimal division. Shift both by the same number of places.
  • Writing a terminating decimal for a repeating one. Use a bar or a rounded symbol.
  • Forgetting to check. Multiply back before trusting the answer.

Practical caveats

Long division gives an exact quotient and remainder for integers, but decimal answers are often rounded. State the precision: 1 ÷ 3 is exactly one-third, approximately 0.333, and 0.33 if rounded to two places. In measurement contexts, the number of significant figures in the inputs limits the meaningful digits in the output.

Division by zero is undefined, not zero and not infinity. If a divisor is zero, stop and examine the problem. In applied work, a computed divisor can be zero because of missing data or a boundary case, so guard against it in spreadsheets and code. Finally, calculators are faster but do not show the remainder or the place-value reasoning; long division remains the clearest way to explain what a decimal expansion means.

Frequently asked questions

What is the difference between a quotient and a remainder?

The quotient is the number of whole times the divisor fits; the remainder is what is left over. For 4,785 ÷ 6, the quotient is 797 and the remainder is 3.

Can a remainder be negative?

In standard whole-number division, no. The remainder is between 0 and divisor − 1. Negative remainders appear in modular arithmetic with a different convention.

How do I know when a decimal terminates?

A fraction in lowest terms terminates exactly when its denominator has no prime factors other than 2 and 5. Otherwise the decimal repeats.

Why do I need to bring down zeros?

Each zero adds a decimal place, allowing the division to continue past the units digit. Without appending zeros, the process stops at a whole-number remainder.

How do I divide by a decimal like 0.25?

Shift the decimal two places in both numbers: 0.25 becomes 25, and the dividend shifts the same amount. Then divide as usual.

Is long division still useful with calculators?

Yes. It explains place value, remainders, and decimal expansions, and it is the basis for polynomial division and mental estimation.

Further reading

Keep exploring

Read next Logarithm: Base, Product Rule, and Scale A logarithm is an exponent in disguise. Learn the definition, the product, quotient and power rules, change of… Read next Order of Operations: PEMDAS and Ambiguous Expressions PEMDAS is a shared convention, not a law of mathematics. Learn the real precedence rules, the exponent and… Read next Significant Figures: Counting, Rounding, and Precision Significant figures record how precisely a value was measured. Learn the counting rules, the addition and multiplication rules,…