The short answer: a ratio compares two quantities, written A:B. Simplify it by dividing both parts by their greatest common divisor, so 12:18 becomes 2:3. Scale it by multiplying both parts by the same number, and solve a proportion by cross-multiplying: if 3/4 = x/20, then 4x = 60 and x = 15.

Key takeaways

  • Simplify with the GCD. Divide both parts by the largest number that divides both evenly.
  • Scale both parts equally. A ratio describes a relationship, not a fixed amount.
  • Part-to-part is not part-to-whole. In 2:3, A is 2 of 5 total parts, or 40 %.
  • Cross-multiplication solves proportions. a/b = c/d gives a × d = b × c.
  • Ratios are unitless; rates are not. 150 miles in 3 hours is a rate of 50 mph, not just a ratio.
  • Zero breaks the comparison. A ratio with a zero part cannot be simplified or inverted.

What a ratio expresses

A ratio compares two quantities of the same kind and states how many times one contains the other, or how the two share a total. The notation A:B, the fraction A/B, and the phrase “A to B” all describe the same relationship. The ratio 16:9 describes the shape of a screen whether that screen is a phone or a projector, because the relationship survives scaling.

That independence from size is the point and the trap. A ratio tells you the proportions but not the amounts. Two mixtures in a 2:3 ratio could each be one litre or one thousand litres, and the ratio alone cannot distinguish them. Always pair a ratio with at least one absolute quantity when the amount matters.

Part-to-part and part-to-whole

In a part-to-part ratio, the two numbers are compared with each other. A paint mix of 2 parts blue to 3 parts yellow is written 2:3, and the total is 5 parts. Blue is 2 of the 5 parts, or 40 % of the mixture; yellow is 3 of the 5 parts, or 60 %. Writing blue as 2/3 of the mixture would be wrong, because 2/3 compares blue with yellow, not with the total.

In a part-to-whole ratio, one part is compared with the total, as in “2 out of 5 parts.” The two conventions answer different questions, and mixing them is the most common source of errors in recipe, budget, and mixture problems. Decide which comparison you need before doing any arithmetic.

Simplifying with the greatest common divisor

The greatest common divisor is the largest whole number that divides both parts without a remainder. Dividing both parts by it gives the simplest whole-number form. For 12:18, the GCD is 6, so the ratio simplifies to 2:3. For 1920:1080, the GCD is 120, so the ratio simplifies to 16:9, the familiar widescreen shape.

The Euclidean algorithm finds the GCD efficiently for large numbers: divide the larger by the smaller, replace the larger with the remainder, and repeat until the remainder is zero. Decimals can be handled by clearing them first. Multiply both parts by a power of ten to make them whole, then simplify: 0.5:1.5 becomes 5:15, which reduces to 1:3. A ratio is fully simplified only when the GCD of the two parts is 1.

Scaling a ratio up and down

Multiplying or dividing both parts by the same nonzero number produces an equivalent ratio. A juice concentrate mixed 3:2 with water makes 5 litres. To make 12 litres, multiply both parts by 2.4, giving 7.2:4.8. The relationship is unchanged; only the batch size moves.

Scaling down works the same way. A 16:9 screen that is 1,920 pixels wide has a height of 1,920 × 9 ÷ 16 = 1,080 pixels. The scale factor applies to both parts, so if one part is known the other follows by proportion. When the result must be a whole number, round with care and expect the ratio to drift slightly from the ideal.

Solving proportions by cross-multiplication

a/b = c/d → a × d = b × c

A proportion asserts that two ratios are equal, written a/b = c/d. Multiplying both sides by bd clears the denominators and gives a × d = b × c. For 3/4 = x/20, cross-multiplying gives 3 × 20 = 4x, so 60 = 4x and x = 15. Checking, 15/20 simplifies to 3/4, so the proportion holds.

Any one term can be found from the other three, provided no denominator is zero. Rather than memorizing four rearrangements, cross-multiply and divide. For 7/12 = 21/x, cross-multiplication gives 7x = 252, so x = 36, and 21/36 does simplify to 7/12. If the unknown appears on both sides, collect terms first, then solve and substitute back to check.

Ratio, rate, and decimal value

A ratio compares quantities of the same kind and is unitless. A rate compares quantities of different kinds and carries units, such as miles per hour or dollars per square foot. The pair 150 miles and 3 hours forms the ratio 150:3, which simplifies to 50:1, but the useful statement is the rate 50 miles per hour.

The decimal value of A:B is A ÷ B. For 16:9 that is about 1.778, a handy number when checking whether a screen is close to widescreen. The share of A in the total is A ÷ (A + B). For 3:1, A is 3 of 4 parts, or 75 %, so a 3:1 paint mix is three-quarters A by volume. All three views describe the same pair and should never disagree.

Worked examples: screen, recipe, and mix

A 1,920 by 1,080 screen has a GCD of 120, so the ratio is 16:9. The decimal value is 1,920 ÷ 1,080 ≈ 1.778. A 1,280 by 720 screen also simplifies to 16:9, confirming that both screens share the same shape.

A recipe lists 4 parts flour to 3 parts water for 6 servings. For 9 servings, multiply both parts by 1.5 to get 6 parts flour and 4.5 parts water. A paint mix of 3:1 means 3 parts base to 1 part hardener, so 4 litres of mixed paint contains 3 litres of base and 1 litre of hardener. A map scale of 1:25,000 means 1 cm on the map stands for 25,000 cm on the ground, so a 6 cm measurement is 150,000 cm, or 1.5 km.

Common mistakes

  • Simplifying by a common factor that is not the GCD. 12:18 reduced to 4:6 is equivalent but not fully simplified.
  • Confusing 2:3 with 2/3 of the total. The share is 2/5, or 40 %.
  • Adding ratios directly. 2:3 plus 3:4 is not 5:7; convert to common totals or actual amounts first.
  • Mixing units. A ratio of minutes to hours is meaningless until both are converted.
  • Entering a zero part. A ratio with B equal to zero cannot be simplified or inverted.
  • Treating a simplified ratio as a quantity. 16:9 describes a shape, not a screen size.

Practical caveats

Ratios assume a linear relationship. Doubling the ingredients of a recipe does not double the cooking time, and doubling a pipe’s diameter does not simply double its flow. Use a ratio for the quantities it genuinely governs, and model the rest separately. In engineering and cooking alike, the ratio is a starting point, not a guarantee that the process scales.

Rounding can distort a ratio. A 16:9 screen is rarely exactly 1.7778, and a simplified ratio of 16:9 may stand in for 1,920:1,080, 1,280:720, or 2,560:1,440. Report the actual dimensions when precision matters. Finally, keep the units aligned: each unit must occupy the same slot on both sides of a proportion, or the result will be off by a conversion factor. Convert first, then compute, and check that the answer is plausible in the units you expect.

Frequently asked questions

What does a simplified ratio mean?

It is the smallest whole-number pair with the same relationship. 12:18 and 2:3 describe the same comparison, but 2:3 is easier to read and compare.

Why is a ratio with B equal to zero invalid?

The decimal value A ÷ B and the share A ÷ (A + B) both divide by B or by the total, so a zero part leaves the comparison undefined.

How is the GCD found?

Use the Euclidean algorithm: divide the larger number by the smaller, then replace the larger with the remainder and repeat until the remainder is zero. The last nonzero remainder is the GCD.

What is the difference between a ratio and a fraction?

A fraction usually compares a part with a whole; a ratio can compare a part with a part. The notation overlaps, but the interpretation depends on what the numbers represent.

Can I use decimals in a ratio?

Yes, but clear them first by multiplying both parts by a power of ten, then simplify. 0.5:1.5 becomes 1:3.

How do I turn a ratio into a percentage?

Add the two parts to get the total, then divide the part you want by that total and multiply by 100. In 2:3, A is 2 ÷ 5 = 40 %.

Further reading

Keep exploring

Read next Logarithm: Base, Product Rule, and Scale A logarithm is an exponent in disguise. Learn the definition, the product, quotient and power rules, change of… Read next Order of Operations: PEMDAS and Ambiguous Expressions PEMDAS is a shared convention, not a law of mathematics. Learn the real precedence rules, the exponent and… Read next Significant Figures: Counting, Rounding, and Precision Significant figures record how precisely a value was measured. Learn the counting rules, the addition and multiplication rules,…

Decision path

Use this guide in a decision

Open Math Decision Center Open companion solver