What this calculator does
Customer lifetime value, or CLV, is a way to put a dollar figure on a customer relationship. It helps a business decide how much it can reasonably spend to acquire a customer and which customer groups are worth the most. The simple version multiplies average purchase value by purchase frequency and expected lifespan, then applies gross margin. This page shows that calculation and the revenue it is based on, so you can see how much of the total is actual profit.
How to use it
- Enter the average amount a customer spends per purchase.
- Enter how many purchases a typical customer makes in a year.
- Enter the expected number of years the customer stays active.
- Enter the gross margin as a percentage, not as a dollar amount.
- Review lifetime revenue, CLV as gross profit, and annual value.
How it works
Example calculations
Example 1: $80 average purchase, 4 per year, 3 years, 60% margin
Annual value is $320, and lifetime revenue is $960. At a 60% gross margin, CLV is $576 in gross profit.
Example 2: $250 average purchase, 2 per year, 5 years, 40% margin
Annual value is $500, and lifetime revenue is $2,500. At a 40% margin, CLV is $1,000. The higher revenue does not produce a higher CLV than Example 1, because the margin is much lower.
Example 3: $20 average purchase, 12 per year, 2 years, 75% margin
Annual value is $240, and lifetime revenue is $480. At a 75% margin, CLV is $360. Frequent small purchases with a strong margin can beat a few large, low-margin ones.
What the result means
CLV is a gross-profit figure, not revenue. That distinction matters: a business that treats lifetime revenue as CLV will overestimate what it can afford to spend on acquisition. Gross margin also leaves out fixed costs such as rent, salaries, and software, so CLV is not the same as net profit. The estimate assumes steady behavior over the whole lifespan, which is rarely exact. Real customers buy less often over time, redeem discounts, and return items. Use CLV as a comparison tool between segments and as a ceiling for acquisition spending, then test it against actual cohort data. A common mistake is to set an acquisition budget equal to CLV; leaving room for overhead and profit usually means spending well below it.
Common mistakes
- Using lifetime revenue as if it were profit.
- Entering gross margin as 60 instead of 0.6 or 60%.
- Forgetting to include acquisition cost when setting a budget.
- Assuming purchase frequency stays flat for every year of the lifespan.
- Averaging across customer groups that behave very differently.
Assumptions and limits
- Average purchase value stays roughly constant over the lifespan.
- Purchase frequency is steady from year to year.
- The customer stays active for the full lifespan entered.
- Gross margin covers the cost of goods but not fixed operating costs.
- No inflation, discounting, or churn curve is applied.
Frequently asked questions
What is the difference between CLV and lifetime revenue?
Lifetime revenue is all the money a customer spends. CLV here is the gross profit from that revenue, after the cost of goods sold.
Does CLV include marketing or acquisition costs?
No. This simple version stops at gross profit. Compare CLV with your customer acquisition cost separately to judge whether a channel pays back.
Which margin should I use?
Use gross margin from your financial statements: revenue minus the direct cost of goods sold, divided by revenue. Do not use net margin, which already subtracts fixed costs.
Should future years be discounted?
A more rigorous model discounts future profit to present value. This page uses a simple undiscounted total, so treat it as an upper-bound estimate.
Can CLV be negative?
Not with a positive margin and positive inputs. If returns or servicing costs exceed revenue for a segment, a more detailed model is needed to show a loss.
How can I improve CLV?
Raise retention, increase purchase frequency, raise average order value, or improve margin. Test one lever at a time so you can see which change actually moves the number.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Part of a decision center
Business Decision Center
See the companion tools, decision guides, and patterns that go with this calculator.
Go deeper
