What this calculator does
Percent error compares a measured or experimental result with an accepted or theoretical value. It is common in chemistry, physics, engineering, and quality checks, where you want to know how far a result landed from a reference. This calculator separates the direction of the miss from its size, so you can see both the signed difference and the absolute percentage. It also explains what happens when the reference value is zero.
How to use it
- Enter the value you measured or calculated as the experimental value.
- Enter the accepted or reference value as the theoretical value.
- Read the absolute error, signed difference, and percent error.
- Check that the theoretical value is not zero before relying on the percentage.
How it works
Example calculations
Example 1: 105 vs. 100
The signed difference is +5, the absolute error is 5, and the percent error is 5%. The positive sign shows that the experimental value is above the reference.
Example 2: 47 vs. 50
The signed difference is -3, the absolute error is 3, and the percent error is 6%. The negative sign shows that the experimental value is below the reference.
Example 3: 9.8 vs. 9.81
The signed difference is -0.01, the absolute error is 0.01, and the percent error is about 0.102%. Small raw differences can still matter when the reference is small.
What the result means
Percent error tells you how large a miss is relative to the reference, not whether the miss matters. Five units off a target of 100 is 5%, but the same five units off a target of 10 is 50%. That scale makes errors comparable across experiments with different units. The sign of the signed difference shows direction: a positive value means the experimental result is above the reference, and a negative value means it is below. Percent error itself is unsigned, so it cannot tell you direction. A small percent error is not automatic proof of a good method, because the reference can be wrong or the measurement can be precise but biased. Report the units, the reference, and the raw difference alongside the percentage so readers can judge the result.
Common mistakes
- Using the experimental value as the denominator instead of the theoretical value.
- Reporting a negative percent error when the sign belongs only to the signed difference.
- Dropping the units from the raw error.
- Calculating percent error when the theoretical value is zero.
Assumptions and limits
- The theoretical value is a meaningful reference and has the same units as the experimental value.
- The theoretical value is not zero when percent error is calculated.
- Percent error is based on absolute size, not direction.
- Displayed percentages are rounded; intermediate steps keep more precision.
Frequently asked questions
What is the difference between error and percent error?
Error is a raw difference in the measurement's units. Percent error divides the absolute error by the absolute theoretical value and multiplies by 100, making it unitless.
Can percent error be negative?
The usual formula uses absolute values, so the percentage is zero or positive. Only the signed difference can be negative.
Why is percent error undefined at a theoretical value of zero?
The formula divides by the theoretical value, and division by zero has no finite result. The raw difference can still be reported.
Should I use the accepted value or the experimental value in the denominator?
Use the theoretical or accepted value. It is the reference you are measuring against; using the experimental value changes the result's meaning.
Does a low percent error mean the result is correct?
Not necessarily. A low percentage means the result is close to the chosen reference, but the reference may be uncertain or the method biased.
How should I report percent error?
State the experimental value, the theoretical value, the raw difference, and the percentage, with units for the raw values. That gives enough context to interpret the number.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
