Skip to content

Grout Calculator

Enter the tiled area, the tile length and width in millimetres, and the joint width and depth in millimetres. The calculator estimates grout in kilograms using a simplified joint-volume formula and a default cement-grout density of 1,600 kg/m³, then adds your waste allowance.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
m²
mm
mm
mm
mm

Usually the tile thickness minus the adhesive bed.

%
Advanced options
kg/m³
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Advanced inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Grout quantity is driven by how much joint there is, not by how much tile there is. Smaller tiles create more joint per square metre, and wider or deeper joints multiply the volume further, so a 100 mm mosaic and a 600 mm plank can need wildly different amounts of grout for the same floor area. The formula here counts the joint length per square metre from the tile dimensions, multiplies by joint width and depth to get a volume, and converts that volume to kilograms using a stated density. It is deliberately simplified: it assumes full-depth joints, square tile edges, and no breakage. Those assumptions are close enough for ordering, and the waste line covers the gap between the estimate and the real floor.

How to use it

  1. Enter the tiled area in square metres.
  2. Enter the tile length and width in millimetres, measured face size.
  3. Enter the joint width in millimetres, usually 2–5 mm for rectified tiles.
  4. Enter the joint depth in millimetres, usually the tile thickness minus the adhesive bed.
  5. Add a waste allowance and read the kilograms and kilograms per square metre.

How it works

Joint length per m² = (L + W) ÷ (L × W), with L and W in metres. Grout per m² (kg) = joint length per m² × joint width × joint depth × density. Total grout = area × grout per m² × (1 + waste ÷ 100). Example: 300 mm × 300 mm tiles have 6.67 m of joint per m²; with 3 mm × 8 mm joints and a density of 1,600 kg/m³, that is 6.67 × 0.003 × 0.008 × 1,600 = 0.256 kg/m², or 5.63 kg for 20 m² with 10% waste.

Example calculations

Example 1: 20 m² of 300 × 300 mm tiles, 3 mm × 8 mm joints

Joint length = (0.3 + 0.3) ÷ 0.09 = 6.67 m per m². Grout = 6.67 × 0.003 × 0.008 × 1,600 = 0.256 kg/m². For 20 m² with 10% waste, the order is 20 × 0.256 × 1.10 = 5.63 kg.

Example 2: 10 m² of 600 × 300 mm tiles, 5 mm × 9 mm joints

Joint length = (0.6 + 0.3) ÷ 0.18 = 5.0 m per m². Grout = 5.0 × 0.005 × 0.009 × 1,600 = 0.36 kg/m². For 10 m² with 10% waste, the order is 3.96 kg. Larger tiles mean less joint, even with wider joints.

Example 3: 30 m² of 100 × 100 mm mosaics, 2 mm × 6 mm joints

Joint length = (0.1 + 0.1) ÷ 0.01 = 20 m per m². Grout = 20 × 0.002 × 0.006 × 1,600 = 0.384 kg/m². For 30 m² with 10% waste, the order is 12.67 kg. Small tiles create far more joint per square metre than large ones.

What the result means

The result is a purchasing estimate for cement-based grout. The density assumption is the main source of difference between brands: a typical cement grout is close to 1,600 kg/m³, while epoxy grout is denser and its manufacturer publishes a different coverage chart. Joint depth is the other input people guess: if the adhesive bed fills half the joint, only the remaining depth needs grout. Wider joints, textured tile edges, and a rough substrate all increase consumption, and a first-time grouting job usually wastes more than an experienced one. Buy the next whole bag or unit up rather than the exact calculated weight, and keep the batch number if colour matching matters.

Common mistakes

  • Using the total floor area as the tiled area when only part of the floor is tiled.
  • Measuring tile size including the joint, which changes the joint length per m².
  • Assuming the full tile thickness is joint depth when the adhesive bed fills part of it.
  • Ignoring the extra joint created by mosaic sheets, borders, and niches.
  • Buying the exact calculated weight with no allowance for mixing loss and cleanup.

Assumptions and limits

  • Tile length and width are the face dimensions, measured without the joint.
  • Joints are full depth over the entered joint depth and are not partially filled with adhesive.
  • Tile edges are square and the joint is a simple rectangle.
  • Cement-based grout has a density of about 1,600 kg/m³.
  • Waste covers mixing loss, cleanup, and normal variation in joint width.

Frequently asked questions

How much grout do I need per square metre?

It depends on tile size and joint dimensions. A 300 × 300 mm tile with 3 mm × 8 mm joints needs about 0.26 kg/m². A 100 × 100 mm mosaic with the same joints needs about 0.38 kg/m², and wide joints can push it above 1 kg/m².

Does smaller tile need more grout?

Yes, for the same area and joint width. Smaller tiles create more joint length per square metre, so the grout volume rises even though the tile area is unchanged.

What joint depth should I enter?

Use the depth that will actually be filled with grout, usually the tile thickness minus the adhesive thickness in the joint. If the joint is 10 mm deep but the adhesive fills 3 mm, enter 7 mm.

Does this work for epoxy grout?

The geometry is the same, but epoxy grout is denser and is usually sold in pre-measured kits with the manufacturer's own coverage chart. Use this calculator for a rough cross-check and the manufacturer's chart for the order.

Should I add waste?

Yes. Ten percent is a reasonable default. Add more for textured tiles, wide or uneven joints, a first grouting job, or a colour that must match a later repair batch.

Why does the formula use (L + W) ÷ (L × W)?

It is the joint length per square metre for a grid of tiles. In one square metre there are about 1 ÷ W horizontal joint lines and 1 ÷ L vertical joint lines, so the total length is 1 ÷ W + 1 ÷ L, which is the same as (L + W) ÷ (L × W).

Sources

This calculator is an educational material estimate. It is not an installation specification. Grout quantity varies with tile edge profile, joint depth, product density, and application method; confirm the coverage and suitability with the grout manufacturer's data sheet or a qualified tiler.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.