What this calculator does
An ellipse is the set of points whose distances to two fixed points add up to a constant, which is why it shows up in orbits, arches, and optical designs. Two numbers describe it: the semi-major axis, half the long width, and the semi-minor axis, half the short width. The area is as simple as a circle's, π times the product of the two axes, but the perimeter is not: no closed formula exists, so any exact answer requires an infinite series. Ramanujan's approximation is accurate to better than one part in a million for ordinary shapes and is what this calculator uses. Eccentricity measures how elongated the ellipse is, running from zero for a circle toward one for a very long ellipse, and the focal distance tells you where the two foci sit.
How to use it
- Measure the full width at the widest point and halve it for the semi-major axis.
- Measure the full height at the narrowest point and halve it for the semi-minor axis.
- Enter both values; the calculator swaps them if they are the wrong way round.
- Read the area and the Ramanujan perimeter.
- Use eccentricity and focal distance to check the shape's proportions.
How it works
Example calculations
Example 1: Semi-axes of 8 and 5
The area is 125.6637 and the Ramanujan perimeter is 41.3863. Eccentricity is 0.7806 and the foci sit 6.2450 from the centre, which is a moderately elongated ellipse.
Example 2: Semi-axes of 10 and 6
The area rises to 188.4956 and the perimeter to 51.0540. Eccentricity of 0.8000 is a little lower than the first example, so the shape is rounder despite being larger.
Example 3: Semi-axes of 5 and 5
Equal semi-axes make a circle: area 78.5398, perimeter 31.4159, eccentricity 0.00. The Ramanujan formula reduces to 2πr in this case, which is a useful check that the implementation is right.
What the result means
Area scales linearly with both axes, so doubling the semi-major axis doubles the area, while the perimeter grows more slowly because it depends on the square root of a quadratic combination. That is why an elongated ellipse has a perimeter close to twice its major axis plus a small correction. Eccentricity is scale-free: a small and a large ellipse with the same axis ratio have the same eccentricity. For construction, an ellipse can be drawn with two pins at the foci and a loop of string, which is exactly the geometric definition and the reason the focal distance is reported.
Common mistakes
- Entering the full width and height instead of the semi-axes.
- Using the circle formula 2πr for the perimeter.
- Swapping the axes and expecting a negative eccentricity.
- Treating the Ramanujan perimeter as exact rather than an approximation.
- Confusing the focal distance with the semi-latus rectum.
- Mixing the axis units with the area units.
Assumptions and limits
- The shape is a true ellipse, not an oval or a rounded rectangle.
- The semi-major axis is at least as long as the semi-minor axis.
- Inputs are measured in the same unit.
- The perimeter uses Ramanujan's second approximation.
- The ellipse is planar and not rotated for the calculation.
Frequently asked questions
Why is there no exact perimeter formula?
The arc length of an ellipse leads to an elliptic integral, which cannot be expressed in elementary functions. The perimeter can only be written as an infinite series or approximated numerically.
How accurate is the Ramanujan approximation?
For ordinary eccentricities it is accurate to better than one part in a million, far beyond any practical measurement. Only extremely elongated ellipses need more terms.
What does eccentricity mean?
A number between 0 and 1 that describes how far the ellipse is from a circle. Zero is a circle; values close to one describe a long, thin ellipse.
Where are the foci?
On the major axis, at a distance c = sqrt(a² - b²) on either side of the centre. A string loop pinned at the two foci traces the ellipse.
Can I use this for an oval table?
Only if the table is a true ellipse. Many oval tables are rounded rectangles or free-form curves, and their area and perimeter differ from the ellipse formula.
How do I find the semi-axes from a measurement?
Measure the full length and width at the widest points and divide each by two. The longer half is the semi-major axis.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.