What this calculator does
Brew ratio is the weight of water divided by the weight of coffee, written as 1 to something. It is the most useful single number in filter coffee because it separates strength from everything else: a 1:15 brew uses more coffee per litre than a 1:17 brew, so it tastes stronger even when the grind and the water are identical. Most pour-over and batch-brew recipes sit between 1:15 and 1:18, while espresso is a much tighter 1:2 to 1:3 and is measured in the cup. The brewed yield is lower than the water you pour because the wet coffee bed keeps roughly twice the dose weight behind. That retention matters when you are filling a carafe or counting cups.
How to use it
- Weigh the coffee dose on a scale, in grams.
- Enter the total brew water in millilitres.
- Enter how many cups the brew should serve.
- Read the ratio and the coffee and water per cup.
- Adjust the dose, not the grind, when you want a stronger or weaker cup.
How it works
Example calculations
Example 1: 18 g of coffee to 300 ml of water
The ratio is 1 : 16.7, a medium filter brew. Served as 2 cups it gives 9.0 g of coffee and 150 ml of water each, with about 264 ml in the cup after retention.
Example 2: A 30 g batch for four cups
The same ratio scaled up gives 7.5 g and 125 ml per cup. Scaling the dose and the water together keeps the ratio constant, which is why a larger batch tastes the same when the grind and contact time are unchanged.
Example 3: An espresso-style 18 g in 40 ml
A ratio of 1 : 2.2 is far denser than filter coffee and lands in the very strong band. The brewed yield is only about 4 ml, which is why espresso is measured in the cup rather than by the litre.
What the result means
Ratio and extraction are different things. Ratio sets how much coffee is in the water; extraction sets how much of the coffee dissolves into it. A 1:16 brew that is ground too coarse and under-extracted tastes weak and sour, while the same ratio ground fine and over-extracted tastes bitter. Changing the ratio changes strength predictably, which is why it is the right dial when a cup tastes too strong or too weak but otherwise balanced. The retention estimate of twice the dose is a rule of thumb: it depends on the brewer, the grind, and how long the bed drains. Water chemistry and temperature also shift what you taste at a fixed ratio.
Common mistakes
- Measuring coffee by volume in a scoop instead of by weight.
- Changing the grind when the real problem is the ratio.
- Assuming the brewed volume equals the water poured.
- Scaling water without scaling coffee, which changes the ratio.
- Using a filter ratio for espresso.
- Ignoring water temperature and grind, which change extraction at the same ratio.
Assumptions and limits
- Coffee is weighed dry, before brewing.
- Water is measured in millilitres and weighs about one gram per millilitre.
- The coffee bed retains roughly twice the dose weight in water.
- Cups are equal in size.
- The ratio describes filter-style brewing, not espresso.
Frequently asked questions
What is a good coffee-to-water ratio?
Most filter recipes use between 1:15 and 1:18. A 1:16 ratio, about 60 grams of coffee per litre, is a common starting point.
Is a lower ratio stronger?
Yes. 1:15 uses more coffee per unit of water than 1:17, so the cup is stronger. The ratio is water divided by coffee, so a smaller second number means a stronger brew.
Why is the brewed yield less than the water?
The wet coffee bed holds water that never reaches the cup, roughly twice the dry dose weight. A 300 ml pour with 18 g of coffee yields about 264 ml.
How much coffee per cup?
For a 150 ml cup at 1:16 you need about 9 g of coffee. A standard mug of 250 ml takes about 15 g.
Does the ratio work for cold brew?
Cold brew usually uses a much higher dose, often 1:8 or stronger, and is diluted before drinking. The arithmetic is the same but the target ratio is different.
Should I adjust the ratio or the grind first?
If the cup is balanced but too strong or weak, adjust the ratio. If it is sour or bitter, adjust the grind. Change one variable at a time.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.