Skip to content

Blood Glucose Unit Converter

Enter a blood glucose value and choose whether it is in mmol/L or mg/dL. The calculator converts it with the 18.0182 factor and shows both units. A value of 7 mmol/L is about 126 mg/dL, and 90 mg/dL is about 5 mmol/L.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Blood glucose is reported in two units around the world. In the United States and a few other places the usual unit is milligrams per decilitre, written mg/dL. In most of Europe, Canada, Australia, and many other countries the usual unit is millimoles per litre, written mmol/L. The two numbers look very different for the same reading: 7 mmol/L and 126 mg/dL describe the same concentration. The conversion factor comes from the molar mass of glucose, and it is the same everywhere: one millimole of glucose per litre is about 18.0182 milligrams per decilitre. That makes conversion straightforward, but it also makes mixing the units a common source of confusion when people compare a home meter with a lab report, or a local guideline with an international one. This converter shows both units for the number you enter, without classifying the result.

How to use it

  1. Enter the blood glucose number exactly as it appears on the meter or report.
  2. Choose the unit that matches the number you entered.
  3. Read the converted value in the other unit.
  4. Check both numbers against the source document to confirm the unit.
  5. Use the conversion factor if you need to check the arithmetic by hand.
  6. Record the unit alongside every reading in a logbook so the numbers stay comparable.

How it works

mg/dL = mmol/L × 18.0182. mmol/L = mg/dL ÷ 18.0182. The factor is the molar mass of glucose expressed for the two units. In the default case 7 mmol/L × 18.0182 = 126.13 mg/dL, and 126 mg/dL ÷ 18.0182 = 7.00 mmol/L.

Example calculations

Example 1: Converting 5 mmol/L

A fasting reading of 5 mmol/L converts to 5 × 18.0182 = 90.09 mg/dL, which is usually written as 90 mg/dL. The same reading appears on an international guideline as 5.0 mmol/L and on a US lab report as about 90 mg/dL. The number changes, but the concentration does not.

Example 2: Converting 126 mg/dL

A lab report of 126 mg/dL converts to 126 ÷ 18.0182 = 6.99 mmol/L, which rounds to 7.0 mmol/L. This is the same pair of numbers as the default example, read in the other direction. Rounding to one decimal place for mmol/L and whole numbers for mg/dL keeps the two values consistent.

Example 3: A high reading in both units

A reading of 200 mg/dL converts to 200 ÷ 18.0182 = 11.10 mmol/L. Going the other way, 11.1 mmol/L × 18.0182 = 200.0 mg/dL. The conversion is linear, so a difference of 1 mmol/L is always about 18 mg/dL, which is a useful mental check when you are comparing two numbers quickly.

What the result means

The converter gives you the same concentration in the other unit, nothing more. It does not say whether a reading is high, low, or in range, because those judgements depend on when the sample was taken, whether it was fasting, what the person ate, and the reference range used by the lab or guideline. A reading that is normal in one context can be out of range in another. What the converter does is remove a common source of error: comparing a number in one unit with a target in the other. If you keep a log, record the unit every time, and if you switch meters or labs, check the unit before you compare the new readings with the old ones.

Common mistakes

  • Multiplying when converting from mg/dL to mmol/L instead of dividing.
  • Using a rounded factor of 18 when a more precise value is needed for a large number.
  • Confusing a blood glucose value with an HbA1c percentage, which uses a different scale.
  • Comparing readings from two meters without checking that both use the same unit.
  • Rounding a converted value so aggressively that it no longer matches the original.
  • Assuming that the same reference range applies to every sample type and situation.

Assumptions and limits

  • The value entered is a blood glucose concentration, not an HbA1c result.
  • The molar mass of glucose gives a factor of about 18.0182.
  • No hematocrit or sample-type correction is applied.
  • The conversion is a simple multiplication or division.
  • The input is a single reading, not an average over time.
  • The output is rounded for display only.

Frequently asked questions

What is the conversion factor for blood glucose?

About 18.0182. Multiply mmol/L by 18.0182 to get mg/dL, or divide mg/dL by 18.0182 to get mmol/L. The exact factor comes from the molar mass of glucose.

Is it accurate enough to use 18 instead of 18.0182?

For everyday mental arithmetic, 18 is close enough: the error is about one part in a thousand. For a recorded conversion or a large value, use the full factor so the result still matches the source.

Why do some countries use mg/dL and others use mmol/L?

It is a convention rather than a scientific difference. Labs and meters are set up for the unit used in their region, and guidelines follow the local convention. The underlying concentration is the same.

Can I convert an HbA1c result with this tool?

No. HbA1c is reported as a percentage or in mmol/mol, which is a different measurement with a different conversion. Use an HbA1c calculator or the formula for estimated average glucose instead.

Does a converted reading tell me whether I have diabetes?

No. A single reading is not a diagnosis, and the meaning depends on the context, the sample, and the reference range. Diagnosis is a clinical decision that uses repeated measurements and other information.

Which unit should I use in my logbook?

Use the unit your meter or lab uses, and write it next to every entry. If you compare readings from different sources, convert them to one unit first so a change in the number reflects a change in glucose, not a change in units.

Sources

This calculator is an educational planning tool, not financial, legal, insurance, medical, or professional advice. Results depend on the inputs and on rules that vary by place and provider. Confirm important decisions with a qualified professional and the relevant documents.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.