What this calculator does
Couriers charge for the space a parcel takes up as well as for its mass, because a light, bulky box fills a van just as much as a heavy one. The space is converted into a notional weight called volumetric or dimensional weight, using a divisor that varies by carrier and by unit system. The billable weight is the larger of the actual and volumetric weights, usually rounded up. That is why a large box of pillows can cost more to ship than a small box of books. This calculator finds the volumetric weight, compares it with the actual weight, and shows the rounded billable weight. It uses the dimensions and divisor you enter, so check the carrier's own published figure before relying on the result.
How to use it
- Measure the parcel's outer length, width, and height in centimetres.
- Enter the actual weight in kilograms.
- Enter the carrier's volumetric divisor, usually 5,000 or 6,000 for centimetres and kilograms.
- Compare the volumetric weight with the actual weight.
- Use the larger, rounded-up figure as the billable weight.
- Check the carrier's rules for rounding and oversize parcels.
How it works
Example calculations
Example 1: A bulky, light parcel
A 40 × 30 × 25 cm box weighs 5 kg on the scale. At a 5,000 divisor the volumetric weight is 6 kg, so the billable weight is 6 kg. The parcel pays for space rather than mass, and reducing any dimension by a few centimetres would lower the charge.
Example 2: A dense parcel
A 30 × 20 × 15 cm box weighs 8 kg. The volume is 9,000 cm³ and the volumetric weight is only 1.8 kg, so the actual weight of 8 kg sets the billable weight. Dense parcels pay for mass, and the packaging size has little effect on price once it is above the volumetric threshold.
Example 3: A different divisor
The same 40 × 30 × 25 cm box at a divisor of 6,000 has a volumetric weight of 5 kg, equal to the actual weight. A carrier using 6,000 would bill 5 kg, while one using 5,000 would bill 6 kg. Always use the divisor from the actual carrier's rate guide rather than a generic number.
What the result means
The billable weight is the number that appears on the invoice, and it is driven by whichever of the two weights is larger. Light parcels with a density below about 200 kg/m³ are usually billed on volume, while heavier parcels are billed on mass. Reducing the box size, using a bag instead of a rigid box, or splitting one large parcel into two smaller ones can lower the volumetric weight, though splitting adds a second fixed fee. Carriers also apply oversize and heavy-parcel surcharges, and they round dimensions and weights in their own way. The calculation here is a planning estimate; the carrier's measurement and rounding rules govern the final charge.
Common mistakes
- Using the inside dimensions instead of the outer dimensions.
- Forgetting that the billable weight is the larger of the two weights.
- Mixing inches and centimetres with a metric divisor.
- Using a generic divisor instead of the carrier's own figure.
- Ignoring rounding rules that push a parcel into the next price band.
- Assuming a light parcel is always cheap to ship.
Assumptions and limits
- The dimensions are the outer dimensions of the packed parcel.
- The actual weight includes the packaging and any labels.
- The divisor matches the carrier's published rule for the unit system.
- The parcel is not subject to oversize or heavy-parcel surcharges.
- Dimensions and weight are measured to the carrier's rounding convention.
- The rate itself is not included, only the billable weight.
Frequently asked questions
What is dimensional weight?
It is a notional weight based on the volume a parcel occupies, calculated as volume divided by a carrier-specific divisor. Couriers use it so that light, bulky parcels pay for the space they take up in the delivery network.
Which divisor should I use?
Use the divisor published by the carrier you are shipping with, because it varies. In metric units, 5,000 and 6,000 cubic centimetres per kilogram are common. Some carriers use different divisors for different services or regions.
How do I lower the volumetric weight?
Reduce the outer dimensions, use flexible packaging where it is safe, and avoid empty space inside the box. Cutting a few centimetres from each dimension can move the parcel below the next weight band.
Does the calculator include rounding?
It rounds the billable weight up to the next half kilogram as a common convention. Carriers may round to the next whole kilogram or to a different increment, so check the carrier's rule before estimating a final price.
Why is my parcel billed above its actual weight?
Because the volumetric weight is higher than the actual weight. The parcel is light for its size, so the carrier charges for the space. The invoice should show both weights and the divisor used.
Can dimensional weight apply to international parcels?
Yes, most international carriers use a volumetric rule, and the divisor can differ from the domestic one. Customs charges and duties are separate and are not part of this calculation.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.