Key takeaways
- Minutes are sixtieths. 8:30 is 8.50 hours, never 8.30 or 8.50 minutes.
- Add 24 hours for overnight. If the end time is earlier than the start, the shift crossed midnight.
- Deduct only unpaid breaks. Short rest breaks are generally paid; a bona fide meal period of 30 minutes or more usually is not.
- Round consistently and never downward. Quarter-hour rounding is common, but it cannot systematically shortchange the employee.
- The workweek is fixed. Overtime is measured against 40 hours in that fixed 168-hour period, not against a calendar month.
Hours are not decimal minutes
The most expensive error in a timesheet is decimal drift. Time is recorded in base 60 and paid in base 10, so 8 hours 30 minutes is 8.50 hours, and 8 hours 50 minutes is 8.833 hours. Writing “8.50” for 8 hours 50 minutes understates the shift by 20 minutes; writing “8.30” for 8 hours 30 minutes overstates it by 20 minutes in the other direction. Neither looks wrong on a spreadsheet.
The conversion is m ÷ 60: 5 minutes is 0.0833, 10 is 0.1667, 15 is 0.25, 20 is 0.3333, 25 is 0.4167, 30 is 0.5, 35 is 0.5833, 40 is 0.6667, 45 is 0.75, 50 is 0.8333, and 55 is 0.9167. Going the other way, multiply the fraction by 60: 0.35 hours is 21 minutes, not 35.
The cleanest workflow keeps minutes as integers until the end: add and subtract in minutes, then divide by 60 once, so rounded decimals never compound across a pay period.
The shift formula
For a single shift, convert both times to minutes after midnight, then:
worked minutes = end − start + (24 × 60 if end ≤ start) − unpaid break minutes
Then divide by 60 for hours. The “if end ≤ start” test is what makes overnight shifts work: 22:00 is 1,320 minutes and 06:30 is 390, so 390 − 1,320 = −930, and adding 1,440 gives 510 minutes, or 8.5 hours.
Worked example: 9:00 to 17:30 with a 30-minute unpaid lunch. 17:30 is 1,050 minutes and 9:00 is 540, so the span is 510 minutes, or 8.5 hours. Subtract 30 for lunch and the paid total is 480 minutes, exactly 8.0 hours.
Two habits prevent most errors: write times in 24-hour form so 12:30 and 00:30 cannot be confused, and state whether a break is paid, since the same shift is 8.0 or 8.5 hours depending on that word.
Breaks: paid, unpaid, and interrupted
U.S. federal law does not require meal or rest breaks, but it does regulate how they are counted when an employer provides them. Under 29 CFR 785.19, a bona fide meal period — typically at least 30 minutes, during which the employee is completely relieved of duty — is not hours worked and need not be paid. Rest periods of 5 to 20 minutes are compensable, because they promote the employee’s efficiency and the employee cannot use the time freely.
The practical test is control, not length. A “lunch” spent at the register is working time, and an interrupted break is working time even if the interruption lasts a minute.
When a break is unpaid, deduct it once, in minutes, and record it; double-deducting lunch is a common payroll error.
Overnight and rotating shifts
An overnight shift is not a special formula; it is the plus-24 rule plus a break deduction. 22:45 to 06:15 is 450 minutes, or 7.5 hours, and with a 30-minute unpaid break it becomes 7.0 paid hours. The arithmetic is identical to a day shift once the wrap is handled.
Overnight shifts expose two other problems. The first is the calendar date: a shift that starts on Monday and ends on Tuesday belongs to one workday, but a payroll system that keys on the start date can assign it to either. The second is daylight saving, which can make the same nominal shift 23 or 25 minutes short or long in wall-clock terms.
Rotating schedules raise a fairness question rather than an arithmetic one: backward rotation can shrink the rest between shifts below the intended minimum.
Rounding and the seven-minute rule
29 CFR 785.48 permits an employer to round start and end times to the nearest quarter hour, provided the rounding does not, over a period of time, fail to compensate employees for all time worked. The familiar “seven-minute rule” follows from that: 1 to 7 minutes past the quarter rounds back, 8 to 14 rounds forward.
Rounding is a policy, not a right to always round in the employer’s favor. A rule that always rounds arrivals up and departures down is not neutral and can violate the standard. The defensible pattern is symmetric rounding, applied to actual clock times, with the policy in writing.
Rounding also interacts with breaks: rounding the shift while deducting the exact break produces a total that cannot be reconstructed from the recorded times. Round both or neither, and keep the raw punches.
Weekly totals and overtime
Under the Fair Labor Standards Act, overtime is due for hours over 40 in a workweek, at not less than one and a half times the regular rate. 29 CFR 778.105 defines the workweek as a fixed and regularly recurring period of 168 hours — seven consecutive 24-hour periods — and it need not match the calendar week. The same schedule can produce overtime under one workweek definition and not another, so the definition has to be chosen in advance and applied consistently.
Worked example: five shifts of 8.00, 8.50, 7.75, 8.00, and 9.00 hours total 41.25 hours. At a regular rate of $18.00, straight-time pay for all hours is $742.50, and the half-time premium on the 1.25 overtime hours adds $11.25, for $753.75. Paying 41.25 hours at $18.00 and stopping there is the common error; the premium is a separate amount.
A few states add daily overtime, such as time and a half after 8 hours and double time after 12. Those rules sit on top of the federal weekly test, and a leap year adds February 29 to the calendar without changing the 40-hour threshold.
Daylight saving and the 23-hour shift
When clocks spring forward, a shift scheduled from 22:00 to 06:00 covers only 7 hours of real time; when they fall back, it covers 9. Hours worked is a physical quantity, so the honest count follows the clock change, not the printed schedule.
Most payroll systems record actual punches and therefore handle the transition automatically. The failure mode is a system that computes scheduled hours from the roster instead of the punches, which quietly pays an extra hour in autumn and withholds one in spring. If the schedule and the punches disagree on a transition night, the punches are the record.
Remote work, travel, and multiple time zones
Record hours in the time zone where the work is performed, and convert to a single zone only for reporting. A 09:00 start in UTC+9 is a different clock time for a manager reading the same row in UTC−5.
Store the offset alongside the timestamp, or store UTC and the zone identifier. A naive local time loses the offset exactly when it matters: the transition dates, which differ by country and can change with little notice.
Common mistakes
- Writing 8.30 for 8 hours 30 minutes.
- Forgetting the plus-24 adjustment on an overnight shift.
- Deducting a paid rest break, or failing to deduct an unpaid meal period.
- Rounding only the shift and not the break.
- Measuring overtime against a month instead of a fixed workweek.
- Paying the overtime hours at straight time and omitting the half-time premium.
- Computing scheduled hours instead of actual hours on a daylight-saving night.
Worked examples
| Start | End | Unpaid break | Paid hours |
|---|---|---|---|
| 09:00 | 17:30 | 30 min | 8.00 |
| 08:00 | 16:00 | 0 min | 8.00 |
| 07:30 | 16:00 | 45 min | 7.75 |
| 22:00 | 06:30 | 30 min | 8.00 |
| 22:45 | 06:15 | 30 min | 7.00 |
| 11:00 | 15:20 | 20 min | 4.00 |
The last row is a short shift: 260 minutes minus 20 is 240, or 4.00 hours. Every row follows the same three steps — convert to minutes, subtract the break, divide by 60 — and the overnight rows differ only by the plus-24 adjustment.
Frequently asked questions
How do I convert minutes to decimal hours?
Divide minutes by 60. Thirty minutes is 0.50, twenty is 0.333, and forty-five is 0.75.
Is a lunch break paid?
A bona fide meal period of 30 minutes or more, with the employee completely relieved of duty, is generally unpaid. Short rest breaks are generally paid.
How do I calculate an overnight shift?
Add 24 hours to the end time before subtracting, or treat the end as minutes past midnight plus 1,440.
Can an employer round my time?
Yes, to the nearest quarter hour or similar, as long as the rounding does not systematically underpay over time.
When is overtime due?
After 40 hours in a fixed workweek under federal law, at one and a half times the regular rate. Some states also require daily overtime.
How many minutes is 0.1 hours?
Six minutes. Multiply the decimal by 60 to convert back to minutes.
Further reading
Keep exploring
Decision path