What this calculator does
Storage is measured in powers of a thousand on the label and often in powers of 1,024 inside the operating system, which is why a 1 TB drive can appear as roughly 931 GB in a file manager. This converter uses the decimal definitions: 1 KB is 1,000 bytes, 1 MB is 1,000 KB, and so on. That matches how drive capacity and data plans are sold. It also notes the binary equivalents so you can check an operating system reading.
How to use it
- Enter the amount of data to convert.
- Select the unit that amount is stated in.
- Read the same amount in bytes, KB, MB, GB, and TB.
- Use bytes for an exact count and the largest unit for readability.
- Check the binary note if a device reports less space.
How it works
Example calculations
Example 1: 1 GB
1 GB is 1,000 MB, 1,000,000 KB, and 1,000,000,000 bytes, or 0.001 TB. In binary terms it is about 0.931 GiB, which explains the 953 MB reading in some tools.
Example 2: 500 MB
500 MB is 500,000 KB, 500,000,000 bytes, 0.5 GB, and 0.0005 TB. A 500 MB plan allows roughly half a billion bytes of transfer.
Example 3: 2 TB
2 TB is 2,000 GB, 2,000,000 MB, 2,000,000,000 KB, and 2,000,000,000,000 bytes. That is about 1.82 TiB, so a 2 TB drive shows as roughly 1.8 TB in a binary view.
What the result means
The gap between decimal and binary units grows quickly with size: about 2.4% at a kilobyte, 7.4% at a gigabyte, 10% at a terabyte, and 12.6% at a petabyte. That is why one drive can have two different-looking capacities without either number being wrong on its own terms. Manufacturers, broadband providers, and most marketing use decimal units because they are simpler and larger. Operating systems have historically used binary units, sometimes with decimal labels, which caused decades of confusion and eventually produced the KiB, MiB, and GiB names. Neither convention is a trick, but mixing them in one calculation produces errors that compound.
Common mistakes
- Expecting exactly 1,000 GB in a tool that reports binary units.
- Using MB and MiB as if they were the same unit.
- Confusing bits with bytes; one byte is eight bits.
- Assuming usable formatted space equals advertised capacity.
Assumptions and limits
- Decimal units use 1,000 bytes per step, as SI defines.
- Values are storage capacities, not transfer rates.
- Formatting and compression are not applied.
Frequently asked questions
Why does my 1 TB drive show less space?
The drive is sold in decimal units, where 1 TB is 1,000,000,000,000 bytes, but an operating system may report binary units. One trillion bytes is about 931 GiB, so the drive shows roughly 931 GB.
Is a kilobyte 1,000 or 1,024 bytes?
Both definitions exist. SI defines a kilobyte as 1,000 bytes, and the binary kibibyte is 1,024 bytes. Storage marketing uses 1,000, while memory and some software use 1,024.
What is a GiB?
A gibibyte is 1,024 mebibytes, or 1,073,741,824 bytes. The name separates binary multiples from the decimal SI prefixes that both used to be called gigabytes.
How many bits are in a byte?
Eight. Network speeds are usually quoted in bits per second, while storage is quoted in bytes, so divide a connection speed by eight to compare it with file sizes.
Does this converter handle KiB and MiB?
The main outputs are decimal units. The formula explains how to reach binary units by dividing by 1,024 per step, so you can check a reading from a device.
Why is usable capacity lower than advertised?
Formatting, file system metadata, and reserved space reduce what you can store. That difference is separate from the decimal and binary question.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Part of a decision center
Conversion Decision Center
See the companion tools, decision guides, and patterns that go with this calculator.
Go deeper
