What this calculator does
This converter handles the unit changes people run into at home, at work, and while traveling. It covers length, weight, temperature, and volume, with metric and US customary units side by side. A table of common units puts the result in context, so you can see roughly how the value compares with familiar measurements. The formulas use standard conversion factors, and the result is rounded only at the end.
Is this the right calculator?
Use it when
- You need a quick conversion between common length, weight, temperature, or volume units.
- You want a general converter rather than a single-unit tool.
Use something else when
- You need live currency exchange rates.
- You need a highly specialized engineering or scientific unit.
What changes the result most
| Category | The category determines which units are available. |
|---|---|
| Conversion factor | Each unit pair has a fixed factor; precision affects rounding. |
| Rounding | Displayed decimals can make a converted value look different. |
How to use it
- Choose a category: length, weight, temperature, or volume.
- Enter the value you want to convert.
- Select the from unit and the to unit.
- Read the converted value.
- Check the common-units table for a quick comparison.
How it works
Example calculations
Example 1: kilometers to miles
10 kilometers divided by 1.609344 is about 6.214 miles. A 10K race is therefore a little more than 6 miles, not 10 miles.
Example 2: kilograms to pounds
70 kilograms divided by 0.45359237 is about 154.32 pounds. A 70 kg suitcase is over the common 50-pound airline limit, which is about 22.7 kg.
Example 3: oven temperature
350 degrees Fahrenheit converts to about 176.7 degrees Celsius: subtract 32 to get 318, then multiply by 5/9. Many recipes round that to 180 C, which is about 356 F.
What the result means
A converted value is only as precise as the original measurement. A distance measured to the nearest mile should not be reported to four decimal places in kilometers. The table is there for a sanity check: if a conversion looks wildly different from the familiar unit, check whether you picked the right category and direction. Watch for US and imperial differences. A US gallon is about 3.785 liters, while an imperial gallon is about 4.546 liters, so the same word means different amounts in different countries. Temperature conversions need the offset, not just a multiplier. For cooking, small differences are usually fine; for medicine, engineering, or fuel, use a calibrated tool and confirm the standard.
Common mistakes
- Using an imperial gallon when the recipe or product uses US gallons.
- Treating temperature like a simple multiplication and forgetting the offset.
- Rounding in the middle of a conversion and then converting again.
- Confusing mass with weight, which differ even though everyday units treat them alike.
- Mixing up fluid ounces, which measure volume, with ounces, which measure weight.
Assumptions and limits
- Volume units are US customary, not UK imperial.
- Length and weight factors use international definitions.
- Temperature conversions assume standard pressure and no phase change.
- Values are rounded only for display.
- The input is a finite number within the range of the selected unit.
Frequently asked questions
Is a US gallon the same as an imperial gallon?
No. A US gallon is about 3.785 liters, and an imperial gallon is about 4.546 liters. The difference matters for fuel, recipes, and product labels, so check which country the unit comes from.
Why do nutrition labels say 240 milliliters for a cup?
A US customary cup is about 236.6 milliliters, but nutrition labeling often rounds a cup to 240 milliliters for simplicity. For cooking, the difference is small; for precise work, use the exact factor.
How do I convert oven temperatures?
Use Celsius = (Fahrenheit - 32) x 5/9. A 350 F oven is about 176.7 C, which recipes often round to 180 C. Oven thermostats also vary, so use an oven thermometer for accuracy.
Is a metric ton the same as a US ton?
No. A metric ton is 1,000 kilograms, or about 2,204.62 pounds. A US short ton is 2,000 pounds, and a UK long ton is 2,240 pounds.
How precise are the results?
The calculator uses standard factors and rounds the display. The main limit is usually the precision of your original measurement, not the conversion itself.
Can I convert speed, area, or other units?
This page covers length, weight, temperature, and volume only. Speed, area, pressure, and energy need different factors, so use a converter built for those categories.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Part of a decision center
Conversion Decision Center
See the companion tools, decision guides, and patterns that go with this calculator.
Go deeper
