What this calculator does
Cyclists use power-to-weight because climbing speed depends on how much power you can produce for each kilogram you carry. A rider with 250 watts at 75 kg has 3.33 W/kg; the same power at 85 kg is 2.94 W/kg. FTP is a practical threshold marker, usually defined as the highest power a rider can sustain in a steady state for about an hour. The calculator divides FTP by weight and compares a ride average with that threshold. It also shows the absolute watts needed to reach common W/kg targets, which helps when choosing gearing, pacing, or a weight goal.
How to use it
- Enter your functional threshold power from a recent test.
- Enter body weight in kilograms.
- Optionally enter the average power from a ride.
- Read FTP per kilogram and the ride power per kilogram.
- Compare the absolute watts needed for 3, 4, and 5 W/kg.
How it works
Example calculations
Example 1: 250 W at 75 kg
FTP per kilogram is 3.33 W/kg. A ride at 200 W is 2.67 W/kg, which is 80% of FTP. Reaching 4 W/kg would require 300 W at this weight.
Example 2: 300 W at 85 kg
The ratio is 3.53 W/kg despite the higher absolute power. A 240 W ride is 2.82 W/kg. To reach 4 W/kg at 85 kg, the rider needs 340 W.
Example 3: 180 W at 60 kg
The ratio is 3.00 W/kg, illustrating that a lighter rider can match a heavier rider's W/kg with fewer absolute watts. A 150 W ride is 2.50 W/kg.
What the result means
W/kg is most predictive on sustained climbs, where gravity dominates. On flat roads, aerodynamic drag matters more, and a heavier rider with high absolute power can be faster. The training bands are broad and intended for healthy adult recreational riders; they are not medical assessments, race categories, or guarantees. FTP itself depends on the test protocol: a 20-minute test is often multiplied by 0.95, while a ramp test uses a different conversion. Use the same protocol each time so the trend is meaningful.
Common mistakes
- Comparing W/kg from different FTP test protocols.
- Using body weight that includes extra clothing, shoes, or a backpack.
- Assuming W/kg predicts flat-road speed.
- Treating an illustrative band as an official category.
- Changing weight and power at the same time and attributing the change to one factor.
Assumptions and limits
- FTP is from a recent, consistent test.
- Body weight is measured in kilograms at a comparable time.
- The ride power is an average for the stated effort.
- The rider is a healthy adult using the number for training context.
- The bands are illustrative, not qualifying standards.
Frequently asked questions
What is FTP?
Functional threshold power is an estimate of the highest power a rider can sustain in a quasi-steady state for roughly an hour. It is used to set training zones and compare efforts. Protocols vary, so compare like with like.
Why is W/kg used in cycling?
On climbs, the power needed to overcome gravity scales with total weight. Dividing power by body weight gives a fairer comparison between riders of different sizes, and it tracks climbing performance better than absolute watts.
Is a higher W/kg always better?
For climbing, generally yes. For flat time trials, absolute power and aerodynamics can matter more. A very high W/kg with low absolute power may still be slow on a flat course.
How often should I retest FTP?
Every four to eight weeks is common during a training block, or after a significant change in fitness. Retesting too often adds fatigue without useful information.
Should I use race weight or current weight?
Use current body weight for an honest comparison. Using a target weight can make the ratio look better than it is and can encourage unhealthy weight practices.
Does the calculator account for bike weight?
No. It uses body weight only, which is the standard convention. Total system weight, including the bike and kit, matters for real climbing speed and can be added separately if needed.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.