Skip to content

Leaky Faucet Calculator

At 10 drips a minute, a single faucet loses about 3.6 liters - nearly one US gallon - every day. Over a year that is roughly 1,314 liters (347 US gallons), about 8.8 bathtubs or 20 showers of water.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
drips/min

Use fewer days for a seasonal tap, such as a garden faucet used for half the year.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

A drip looks like nothing, which is exactly why it is easy to ignore. The math is not nothing. The United States Geological Survey's classic drip figures count one drop as about 0.25 milliliters, 4,000 drops as a liter, and 15,140 drops as a US gallon. This calculator turns drips per minute into water per day, per year, in US gallons, and in the bathtubs and showers people can picture. It is a water-waste demo, not a plumbing inspection: the real volume depends on the fixture, the water pressure, and whether the faucet is dripping or running. Use it to see how a small leak scales, and to decide whether that washer is worth replacing this weekend.

How to use it

  1. Count the drips for a full minute, or count for 30 seconds and multiply by two.
  2. Enter the average drips per minute.
  3. Enter how many faucets are leaking and how many homes you want to include.
  4. Set the days per year the leak runs - keep 365 for a year-round tap, or lower it for a seasonal outdoor faucet.
  5. Read the yearly liters and US gallons, then compare them with the bathtub and shower counts.
  6. Change one input at a time to see which leak is worth fixing first.

How it works

Drops per day = drips per minute x 1,440 minutes x faucets x homes. Liters per day = drops per day / 4,000. Liters per year = liters per day x days. US gallons per year = drops per day x days / 15,140. Bathtubs per year = liters per year / 150. Showers per year = liters per year / 65. Default case: 10 x 1,440 = 14,400 drops/day; 14,400 / 4,000 = 3.6 L/day; 3.6 x 365 = 1,314 L/year; 14,400 x 365 / 15,140 = 347.2 US gallons; 1,314 / 150 = 8.8 bathtubs; 1,314 / 65 = 20.2 showers.

Example calculations

Example 1: One slow drip

Ten drips a minute, one faucet, all year: 14,400 drops a day becomes 3.6 liters a day, 1,314 liters a year, and 347 US gallons a year. That is about 8.8 bathtubs or 20 showers - from a sound most people stop hearing after a day.

Example 2: Two faster drips

Two faucets at 30 drips a minute each: 30 x 1,440 x 2 = 86,400 drops a day, or 21.6 liters a day. Over a year that is 7,884 liters (2,083 US gallons), roughly 52.6 bathtubs or 121 showers.

Example 3: A block party

Five slow drips a minute, four faucets, and 25 homes: 720,000 drops a day, 180 liters a day, and 65,700 liters a year - about 17,358 US gallons, 438 bathtubs, or 1,011 showers. Small numbers get big fast when they are multiplied.

What the result means

The result scales linearly, so doubling the drip rate, the faucets, or the homes doubles the waste. The bathtub and shower comparisons use 150 liters and 65 liters as round numbers, not measurements of your fixtures. A fast drip is not the same as a trickle, and a steady stream is much worse than any drip count, so stop counting and let the calculator show a trickle as a higher rate. If the leak is on the hot side, you pay for the water twice because you already paid to heat it. A dripping faucet can also stain the basin and wear the valve seat, so fixing it early is usually cheaper than the water bill alone suggests. The calculator cannot tell you what is wrong with the faucet; that takes a look at the washer, cartridge, or valve.

Common mistakes

  • Counting drips for 15 seconds and multiplying by 60 without checking whether the drip rate is steady.
  • Treating a running trickle as drops, which undercounts a serious leak by a wide margin.
  • Mixing liters and US gallons in the same sentence, since 1 US gallon is about 3.785 liters.
  • Using 365 days for a garden tap that only runs for part of the year.
  • Stopping at the water bill and ignoring the energy used to heat hot water and the wear on the faucet.

Assumptions and limits

  • One drop is about 0.25 milliliters, the USGS drip-math average.
  • 4,000 drops make 1 liter and 15,140 drops make 1 US gallon.
  • A 150 L bathtub and a 65 L shower are illustrative comparisons, not measurements of your fixtures.
  • The drip rate you enter stays steady for the days per year you enter.
  • The leak is cold water; heating energy is a separate cost unless you add it yourself.

Frequently asked questions

How much water does a dripping faucet waste?

At a steady 10 drips a minute, about 3.6 liters a day, 1,314 liters a year, or 347 US gallons a year. Faster drips or several faucets multiply the figure, which is why the calculator shows the rate and the yearly total together.

How do I count drips per minute accurately?

Watch a clock for a full minute and count every drop, or count for 30 seconds and double it. For a slow drip, count over two or three minutes and divide by the number of minutes. Drips are uneven, so an average is more honest than one short sample.

How many drips are in a gallon?

The USGS drip math uses about 15,140 drops per US gallon and about 4,000 drops per liter. Those are averages for a typical water drop, and real drop size changes with the spout and the water pressure.

Does a hot-water leak cost more than a cold-water leak?

Yes. You pay for the water and for the energy used to heat it, and the waste continues down the drain. The calculator counts water only, so a hot-water leak costs more than the numbers shown.

Can a dripping faucet be fixed without a plumber?

Often it is a worn washer, O-ring, or cartridge, and replacement parts are inexpensive. Turn off the water supply first and follow the manufacturer's instructions. If the valve body is damaged or you are not comfortable with the repair, call a licensed plumber.

Is this a water bill calculator?

No. It estimates wasted volume, not the price you pay. To get a cost, multiply the yearly liters or gallons by your local water rate; sewer charges may apply too, because the water still goes down the drain.

Sources

This calculator is an educational estimate, not plumbing, financial, or professional advice. Drip volume varies with the fixture, pressure, and how the drip is measured, and repair decisions should follow the manufacturer's guidance or a licensed plumber.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

FROM THE EXPERIMENT TO THE REAL ANSWER

If you need the real number

The Lab is for playing. These calculators are built for decisions that matter.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.