What this calculator does
This calculator estimates what an appliance costs to run over a set number of days. It converts watts and hours into kilowatt-hours (kWh), then multiplies by your electricity rate. You can use it for a space heater, air conditioner, refrigerator, computer, or any device with a wattage label. The result is a useful planning estimate, but it is not a metered reading. Appliances that cycle, change settings, or use standby power will not match a simple hours-per-day entry exactly.
How to use it
- Find the appliance's wattage on its label or manual.
- Enter the average hours it runs each day.
- Enter your electricity rate in cents per kWh.
- Enter the number of days to cover.
- Review kWh and cost per day and for the full period.
How it works
Example calculations
Example 1: space heater
1,500 watts for 2 hours a day at 15 cents per kWh for 30 days gives 3 kWh per day, 90 kWh for the period, $13.50 total, and $0.45 per day.
Example 2: fan
60 watts for 5 hours a day at 12 cents per kWh for 30 days gives 0.3 kWh per day, 9 kWh for the period, $1.08 total, and about $0.036 per day.
Example 3: dryer
2,000 watts for 1 hour a day at 20 cents per kWh for 7 days gives 2 kWh per day, 14 kWh for the period, $2.80 total, and $0.40 per day.
What the result means
A wattage label usually shows the maximum power a device draws, not its average use. A refrigerator cycles on and off, a laptop draws different amounts depending on the task, and a heater may run only until the room reaches the set temperature. Standby power, chargers left plugged in, and changing electricity rates can also change the bill. If your rate has tiers, time-of-use pricing, or fixed charges, the cost of one appliance is only part of the story. For a better estimate, use a plug-in power meter or check the device's energy guide. The calculator assumes a constant rate and a steady number of hours. Use the nameplate wattage only as a starting point for a device that runs continuously.
Common mistakes
- Using the maximum wattage as if the appliance always draws it.
- Entering minutes instead of hours.
- Forgetting to divide watts by 1,000.
- Using a rate that includes taxes or fixed fees inconsistently.
- Ignoring standby power and cycling.
Assumptions and limits
- The appliance draws a steady amount of power during the entered hours.
- The electricity rate is constant in cents per kWh.
- Hours per day are averaged over the period.
- The rate excludes fixed charges, taxes, and tier adjustments.
Frequently asked questions
What is a kWh?
It is 1,000 watts used for one hour. It is the unit utilities use to bill electricity.
Where do I find wattage?
Check the label, manual, or power adapter. Some devices list amps and volts instead.
Why is my bill different?
The label may show maximum draw, and cycling, settings, taxes, and fees change actual cost.
How do I convert watts to kWh?
Multiply watts by hours, then divide by 1,000. A 1,500-watt device run for 2 hours uses 3 kWh.
Does standby power count?
Yes, if the device draws power while off or idle. Add those hours or use a power meter.
Can I use this for time-of-use rates?
Only if you use one average rate. Time-of-use pricing needs a separate calculation for each rate period.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
