Key takeaways
- 1 Hz = 1 cycle per second = 1 s⁻¹. The hertz is a coherent SI derived unit.
- Each prefix is a factor of 1,000, never 1,024. Kilo, mega, and giga mean 10³, 10⁶, and 10⁹.
- Period is the reciprocal of frequency. T = 1/f, so period falls as frequency rises.
- 1 Hz = 60 rpm. Rotary speed uses a factor of 60 because a minute has 60 seconds.
- Angular frequency is rad/s, not Hz. ω = 2πf, so 1 Hz is about 6.283 rad/s.
Frequency counts repeating events
Frequency is the number of repetitions of a periodic event in one second. The SI unit is the hertz, defined as one reciprocal second: 1 Hz = 1 s⁻¹. A mains supply at 50 Hz completes fifty cycles every second, a guitar string at 440 Hz completes 440, and a processor clock at 3.5 GHz completes 3.5 billion. The unit is named after Heinrich Hertz, who demonstrated radio waves in the 1880s.
Frequency describes repetition, not size. A high-frequency signal can be weak, and a low-frequency one can be strong; amplitude, power, and bandwidth are separate quantities. Frequency also differs from angular frequency, which counts radians rather than cycles, and from rotational speed, which counts revolutions rather than cycles. Keeping those three ideas apart prevents most unit errors.
Prefixes step by exactly 1,000
The SI prefixes are decimal. Kilo means 10³, mega means 10⁶, and giga means 10⁹, so each step is a factor of 1,000. One kilohertz is a thousand hertz, one megahertz is a thousand kilohertz, and one gigahertz is a thousand megahertz. The same ladder continues downward through millihertz (10⁻³ Hz), microhertz (10⁻⁶ Hz), and nanohertz (10⁻⁹ Hz).
Converting is therefore a decimal shift. 2.4 GHz = 2,400 MHz = 2,400,000 kHz = 2,400,000,000 Hz. A 500 kHz signal is 500,000 Hz, or 0.5 MHz. The case of the prefix matters: MHz is megahertz, while mHz is millihertz, a factor of 10⁹ smaller. Written without care, the two are easy to confuse.
Period is the reciprocal of frequency
The period T is the time for one complete cycle, and it is the reciprocal of frequency: T = 1/f. If f is in hertz, T is in seconds. A 1 Hz signal has a 1 s period, 2 Hz has 0.5 s, 50 Hz has 0.02 s or 20 ms, and 60 Hz has 1/60 s = 16.6667 ms. At radio frequencies the period becomes very small: 1 MHz has a 1 µs period and 1 GHz has a 1 ns period.
The relationship is inverse, not linear. Doubling the frequency halves the period; multiplying it by a thousand divides the period by a thousand. For 2.4 GHz, T = 1 / 2,400,000,000 = 4.1667 × 10⁻¹⁰ s, or 0.4167 ns. Rounding the period to two significant figures would give 0.42 ns, a 0.8% change, so keep enough digits when the period is used in timing calculations.
RPM converts with a factor of 60
Revolutions per minute is a frequency measured in cycles per minute. Since a minute has 60 seconds, 1 rpm = 1/60 Hz = 0.0166667 Hz, and 1 Hz = 60 rpm. A motor turning at 3,600 rpm therefore runs at 60 Hz, and one at 1,800 rpm runs at 30 Hz. A 50 Hz supply corresponds to 3,000 rpm for a two-pole synchronous machine, which is why 3,000 and 3,600 rpm are familiar nameplate speeds.
Go the other way by multiplying by 60. A 33⅓ rpm record turns at 0.5556 Hz, with a period of 1.8 s. A 78 rpm record turns at 1.3 Hz, with a period of about 0.769 s. Those are useful checks because the period is long enough to observe directly, unlike the nanosecond periods of radio signals.
Angular frequency uses radians, not cycles
Angular frequency ω counts radians per second rather than cycles per second. One complete cycle is 2π radians, so ω = 2πf. A 60 Hz waveform has ω = 376.991 rad/s, and 1 Hz is 6.283185 rad/s. Conversely, 1 rad/s = 1/(2π) Hz = 0.159155 Hz, which is about 9.5493 rpm.
Radians are dimensionless, so rad/s is dimensionally the same as s⁻¹, but the two numbers are not interchangeable. A formula that expects ω will be wrong by a factor of 2π if it is given f in hertz. The notation ω vs f is the warning: use ω = 2πf when a derivation is in radians, and keep hertz for cycle counts.
Worked conversions
2.4 GHz to megahertz. Multiply by 1,000: 2.4 × 1,000 = 2,400 MHz. In hertz, multiply by 10⁹: 2,400,000,000 Hz. The period is 1 / (2.4 × 10⁹) = 0.4167 ns.
500 kHz to hertz and megahertz. 500 × 1,000 = 500,000 Hz; 500 / 1,000 = 0.5 MHz. The period is 1 / 500,000 = 2 µs.
60 Hz to period and rpm. T = 1/60 = 16.667 ms; rotary speed = 60 × 60 = 3,600 rpm. The angular frequency is 2π × 60 = 376.991 rad/s.
78 rpm to hertz. 78 / 60 = 1.3 Hz; T = 1/1.3 = 0.7692 s. This is a case where the period is easier to interpret than the frequency.
Where each unit appears
Audio uses hertz for pitch and kilohertz for the audible range, which runs from about 20 Hz to 20 kHz. Mains electricity is 50 Hz in most of the world and 60 Hz in North America and parts of Asia. AM radio channels are spaced in kilohertz, FM and television in megahertz, and Wi-Fi, Bluetooth, and cellular links in megahertz or gigahertz. Processor clocks are quoted in gigahertz, and machine speeds in rpm.
The same physical signal can be described in several units, so compare like with like. A 900 MHz link is lower in frequency than a 2.4 GHz link even though 900 looks larger than 2.4. Convert both to hertz before comparing, and do not confuse the carrier frequency with the bandwidth the channel occupies.
Common mistakes
Using 1,024 instead of 1,000. SI prefixes are decimal. Binary prefixes such as kibi and mebi belong to data storage, not to frequency.
Multiplying when going up a prefix. Going from hertz to kilohertz divides by 1,000; going from kilohertz to hertz multiplies. Check the direction against the size of the number.
Mixing period and frequency. A 60 Hz signal has a 16.667 ms period, not a 60 ms period. The two are reciprocals, and the units differ.
Treating rpm as hertz. A 3,600 rpm motor is 60 Hz, not 3,600 Hz. The factor of 60 is easy to forget.
Confusing mHz with MHz. Millihertz is 10⁻³ Hz; megahertz is 10⁶ Hz. The difference is a factor of 10⁹.
Confusing frequency with bandwidth. A carrier at 2.4 GHz may occupy only 20 MHz. The centre frequency and the channel width are different numbers.
Rounding and precision
The prefix conversions are exact decimal shifts, so 2.4 GHz is exactly 2,400 MHz. The reciprocal step is where rounding enters. 1/60 s is a repeating decimal, so 16.667 ms is already rounded; carrying three or four significant figures is usually enough for timing work, while RF calculations may need six or more. Round only the final value, not the intermediate frequency.
Instrument resolution also limits the answer. A frequency counter with a 1 s gate has 1 Hz resolution; a 10 s gate has 0.1 Hz. The converted period cannot be more precise than the frequency measurement it came from. Very small periods are easier to read in nanoseconds or picoseconds, and very large frequencies in scientific notation, but the underlying value does not change.
Frequently asked questions
How many hertz are in one kilohertz?
1,000 Hz. Kilo is the SI prefix for 10³, so multiply a kilohertz value by 1,000 to get hertz, or divide hertz by 1,000 to get kilohertz.
How do I convert frequency to period?
Use T = 1/f. For 60 Hz, T = 1/60 = 0.016667 s, or 16.667 ms. For 1 GHz, T = 1 ns.
How many rpm is 50 Hz?
3,000 rpm. Multiply the frequency in hertz by 60, because one hertz is one cycle per second and a minute has 60 seconds.
Is a gigahertz larger than a megahertz?
Yes. 1 GHz = 1,000 MHz = 1,000,000 kHz = 1,000,000,000 Hz. A 5 GHz signal has a higher frequency than a 2.4 GHz signal.
What is the difference between hertz and radians per second?
Hertz counts cycles per second; radians per second counts radians per second. One cycle is 2π radians, so ω = 2πf and 1 Hz = 6.283185 rad/s.
Why is 2.4 GHz also written as 2,400 MHz?
Because 1 GHz equals 1,000 MHz. Multiplying 2.4 by 1,000 gives 2,400. The frequency is unchanged; only the unit and the number expressing it change.
Further reading