The short answer: gravel volume = area × depth. Convert to cubic yards by dividing by 27. Convert cubic yards to tons using the gravel’s density, often 1.3–1.5 tons per cubic yard. Add 10% for compaction and waste.

Key takeaways

  • Depth drives the volume.
  • 1 cubic yard = 27 cubic feet.
  • Tons depend on density and moisture.
  • Compaction reduces volume.
  • Order by the ton or cubic yard, not the bag.

The formula

Area = length × width. Depth in feet = inches ÷ 12. Volume = area × depth. Cubic yards = volume ÷ 27. Tons = cubic yards × density. Example: 20 ft × 20 ft at 3 in deep = 400 sq ft × 0.25 ft = 100 cu ft = 3.70 cu yd. At 1.4 tons/cu yd, that is 5.18 tons. Add 10%: about 5.7 tons.

Density and moisture

Crushed stone, pea gravel, and river rock have different densities. Moisture changes the weight. Ask the supplier for the conversion used for the specific product. A “ton” is a weight, not a volume; the same volume can weigh different amounts.

Compaction

Gravel compacts when placed and rolled. A 3-inch loose layer may settle to 2.5 inches. Order 10% extra for compaction, plus a little for spillage. For a driveway base, use the compacted depth in the design and adjust the order.

What to compare

Compare the cubic yards, the tons, the density, and the delivery fee. The cheapest per ton may not be the cheapest delivered.

A driveway example

A 12 ft × 30 ft driveway at 4 inches deep: 360 sq ft × 0.333 ft = 120 cu ft = 4.44 cu yd. At 1.4 tons/cu yd, that is 6.22 tons. Add 10% for compaction: about 6.8 tons. For a base layer, use the compacted depth and order accordingly.

Depth by use

A garden path may need 2–3 inches; a driveway base 4–6 inches; a heavy-use area more. The subgrade and drainage matter as much as the depth. A geotextile fabric can reduce stone loss into the soil.

What to compare

Compare the cubic yards, tons, density, and delivered cost. A cheaper per-ton price may not be cheaper after delivery.

More examples

A 10 ft × 10 ft patio at 2 inches: 100 sq ft × 0.167 = 16.7 cu ft = 0.62 cu yd. At 1.4 tons/cu yd, 0.87 tons. A 20 ft × 20 ft driveway at 4 inches: 400 × 0.333 = 133 cu ft = 4.94 cu yd; at 1.4 tons/cu yd, 6.9 tons.

Density check

Ask the supplier for the tons per cubic yard for the product. Pea gravel, crushed stone, and river rock differ. A moisture-heavy load weighs more; the volume is the same.

What to compare

Compare the volume, tons, density, and delivered cost. A per-ton price is not comparable without the density.

Driveway base

A driveway base may need 4–6 inches of compacted gravel. Order 10% extra for compaction and a little for spillage. A geotextile fabric can reduce stone loss into soft soil. The subgrade should be graded for drainage before the stone is placed.

What to compare

Compare the compacted depth, the loose depth, the tons, and the delivered cost. A per-ton price without density is not comparable.

Example with a path

A path 3 ft wide and 40 ft long is 120 sq ft. At 2 inches, volume is 20 cu ft, or 0.74 cu yd. At 1.4 tons/cu yd, 1.04 tons. Add 10%: 1.14 tons. For a 3-inch path, volume is 30 cu ft, or 1.11 cu yd, and the tonnage rises.

What to compare

Compare the depth, cubic yards, tons, density, and delivered cost.

Delivery and access

Bulk gravel is delivered by truck; check the driveway width and overhead clearance. A smaller truck may cost more but fit. Place a tarp if the pile will sit on a paved surface. For a small job, bagged gravel may be simpler.

What to compare

Compare the delivered cost, the truck access, and the labor. A cheap per-ton price can be offset by a delivery that cannot reach the site.

Compaction and drainage

Gravel compacts; order 10% extra. Grade the subgrade for drainage and use a geotextile where the soil is soft. The depth depends on the load and the stone type.

What to compare

Compare the compacted depth, tons, density, and delivered cost.

What to compare

Compare the compacted depth, cubic yards, tons, density, and delivered cost. A cheap per-ton price can be offset by a delivery that cannot reach the site.

Ask the supplier for the density used in the conversion.

Compare the compacted depth, cubic yards, tons, density, and delivered cost before ordering. Ask the supplier for the density used in the conversion.

Compare the compacted depth, cubic yards, tons, density, and delivered cost before ordering. Ask the supplier for the density used in the conversion, and check the truck access.

Compaction reduces the loose volume, so order about 10% extra. For a driveway base, use the compacted depth and a geotextile where the soil is soft. The subgrade should drain away from the structure.

Ask the supplier for the tons per cubic yard for the specific stone.

Check the delivery access and the truck size before ordering bulk gravel, and keep the density conversion with the order.

Check the truck access and the pile location before the delivery arrives.

Check the truck access and the pile location before the delivery arrives.

Frequently asked questions

How many tons are in a cubic yard of gravel?

Often 1.3–1.5 tons, but it depends on the stone and moisture. Ask the supplier.

How deep should gravel be?

It depends on the use: 2–3 inches for a path, 4–6 inches for a driveway base, and more for heavy loads.

How do I convert cubic feet to cubic yards?

Divide by 27.

Should I add waste?

Yes, about 10% for compaction and spillage.

Further reading

Keep exploring

Read next Roofing: Squares, Pitch, Waste, and Cost Convert a roof footprint into sloped area, squares, and bundles with the pitch multiplier. Includes waste allowances, a… Read next MPG: Real-World Fuel Economy and Cost per Mile MPG is miles divided by gallons, and cost per mile is price divided by MPG. Learn to measure… Read next Party Planning: Guests, Food, Drink, and Budget Estimate food, drink, and cost per guest with a simple multiplication model, then adjust for buffet portions, ice,…