The short answer: percentage increase divides the change by the original value and multiplies by 100: (new − original) ÷ original × 100. Going from 80 to 100 is an increase of 20, and 20 ÷ 80 = 25 %. The original value is the base, which is why a 25 % rise and a 25 % fall do not cancel.

Key takeaways

  • The base is the original value. Dividing by the new value answers a different question.
  • Sign carries direction. A positive result is an increase; a negative result is a decrease.
  • Multipliers compose. A 20 % rise then a 10 % fall is 1.20 × 0.90 = 1.08, a net 8 %.
  • Reverse by dividing. To undo a 25 % increase, divide by 1.25, not by 0.75.
  • Zero base is undefined. A change from 0 to 50 has no finite percentage increase.
  • Points are not percent. A move from 4 % to 6 % is 2 percentage points but a 50 % increase.

What percentage increase measures

Percentage increase expresses a change as a fraction of where the value started. If a price rises from 80 to 100, the absolute change is 20 and the base is 80, so the relative change is 20 ÷ 80 = 0.25, or 25 %. The same absolute change from a base of 200 would be only 10 %, which is why the base matters as much as the gap.

The measure answers “how much bigger is it compared with what it was,” not “how much of the new value is the change.” A 25 % increase means the new value is 125 % of the old one, or 1.25 times as large. Keeping that multiplier language in mind prevents most base errors.

The formula and its rearrangements

r = (new − original) ÷ original × 100
new = original × (1 + r ÷ 100)
original = new ÷ (1 + r ÷ 100)

The first form computes the rate from two values. The second projects a new value from a known base and rate. The third recovers the base from a result, which is the form most people forget and the one that exposes bad comparisons. A positive r is an increase; a negative r is a decrease. When the original value is zero the formula divides by zero, so the percentage change is undefined rather than infinite.

Worked example: a price and a salary

A price rises from 80 to 100. The change is 100 − 80 = 20, and 20 ÷ 80 = 0.25, so the increase is 25 %. The multiplier is 100 ÷ 80 = 1.25, confirming that the new price is 1.25 times the old one. A salary rises from 52,000 to 57,200. The change is 5,200, and 5,200 ÷ 52,000 = 0.10, so the raise is 10 %. Checking forward, 52,000 × 1.10 = 57,200.

Both examples are unremarkable because the bases are round and the rates are simple. The arithmetic is not the hard part; choosing the correct base is. If the same 5,200 raise were compared with the new salary of 57,200, the result would be about 9.1 %, which understates the raise relative to what the person actually earned before.

Increase, decrease, and the asymmetry problem

Going from 200 to 150 is a fall of 50, and 50 ÷ 200 = 0.25, so the change is −25 %. The sign carries the direction, and the absolute change is the same 50 in either direction. What changes is the base. Going from 80 to 100 is +25 %, while going from 100 back to 80 is −20 %, even though the gap is 20 both times.

This asymmetry is a property of the measure, not an error. Percentages are relative to a moving starting point, so the same absolute move is a different fraction depending on which end you start from. Report the base alongside the percentage, or a reader may assume the wrong denominator and double-count the effect.

Reverse checks: undoing a percentage change

If a value rises by 25 %, the new value is 1.25 times the old one, so the old value is the new value divided by 1.25. From 125, 125 ÷ 1.25 = 100. Multiplying 125 by 0.75 instead gives 93.75, which is 6.25 % below the original. The correct inverse of a multiplier of 1.25 is 1 ÷ 1.25 = 0.80, a 20 % decrease.

Use the same check on any reported increase. If a figure is said to have risen 40 % and now stands at 70, the implied base is 70 ÷ 1.40 = 50, and 50 × 1.40 = 70 confirms it. If the implied base does not match the stated starting value, the percentage and the values are inconsistent, and at least one of the three numbers is wrong.

Chained changes and multipliers

Successive percentage changes multiply rather than add. A 20 % rise followed by a 10 % fall gives 1.20 × 0.90 = 1.08, a net increase of 8 %, not 10 %. Two consecutive 10 % rises give 1.10 × 1.10 = 1.21, a 21 % increase. A 50 % fall followed by a 50 % rise gives 0.50 × 1.50 = 0.75, which is still 25 % below the start.

Because multipliers compose, the order of the changes does not matter for the final level, but it does matter for the intermediate values. To average growth rates over several periods, take the geometric mean of the multipliers, not the arithmetic mean of the percentages. A fund that gains 10 % then 20 % has an average annual growth factor of √(1.10 × 1.20) ≈ 1.1489, about 14.9 % per year.

Percentage points, percent change, and percentage difference

A rate that moves from 4 % to 6 % has risen by 2 percentage points. Relative to its own starting value, it has risen by (6 − 4) ÷ 4 = 50 %. Both statements are true, and confusing them turns a modest change into a dramatic headline or the reverse. Percentage points compare two percentages on their own scale; percent change compares them relative to the starting percentage.

Percentage difference is a third measure. It divides the gap by the average of the two values, so the result is symmetric and needs no baseline. Comparing 80 and 100 as two equally valid figures gives 20 ÷ 90 ≈ 22.2 %, while treating 80 as the starting point gives a 25 % increase. Choose the measure that matches the question.

Common mistakes

  • Dividing by the new value. The denominator is always the original value.
  • Adding percentages. A 20 % rise and a 10 % fall combine as multipliers, not as +20 − 10.
  • Reversing with the same rate. To undo +25 %, divide by 1.25, which is a 20 % reduction.
  • Using a zero or negative base. A change from 0 is undefined, and a negative base flips the apparent direction.
  • Rounding the base too early. Keep full precision until the final percentage.
  • Calling percentage points percent. A 2-point move from a 4 % base is a 50 % change.

Practical caveats

State the base and the period. “Sales rose 20 %” is incomplete without “from 2025 to 2026” and the figure the percentage refers to. Small bases produce large percentages from trivial moves: a jump from 1 to 2 is +100 %, but the absolute change is one unit, so report both. With a negative base the formula can invert the apparent direction. A loss shrinking from −10 to −5 produces ( −5 + 10 ) ÷ −10 = −50 %, even though the value moved toward zero; when the base can be negative, report the absolute change instead or define the comparison explicitly.

Separate nominal from real changes. A 5 % raise during 3 % inflation leaves a real gain of 1.05 ÷ 1.03 − 1 ≈ 1.9 %, not 2 %. Decide whether the figures are already adjusted before computing. Finally, a 100 % increase doubles a value and a 200 % increase triples it; percentages above 100 % are ordinary, but they are often misread, so pair the percentage with the multiplier.

Frequently asked questions

What is the difference between percentage change and percentage difference?

Percentage change uses the original value as its base and is directional. Percentage difference uses the average of the two values as its base and is symmetric, so neither value is treated as a starting point.

Why is a change from 0 to 50 undefined?

The formula divides by the original value. With a base of zero there is no scale to compare against, so no finite percentage describes the move. Report the absolute change instead.

How do I calculate a percentage increase by hand?

Subtract the original from the new value, divide by the original, and multiply by 100. For 80 to 100: 20 ÷ 80 = 0.25, so 25 %.

What does the multiplier mean?

It is the new value divided by the original. A multiplier of 1.25 is a 25 % increase, 0.75 is a 25 % decrease, and 3.0 is a 200 % increase.

Can a percentage increase be more than 100 %?

Yes. More than 100 % means the new value is more than double the old one. A 200 % increase triples it.

Why does a 25 % increase not cancel a 25 % decrease?

The two changes use different bases. From 100, a 25 % rise reaches 125, and a 25 % fall from 125 lands at 93.75 because the second base is larger.

Further reading

Keep exploring

Read next Logarithm: Base, Product Rule, and Scale A logarithm is an exponent in disguise. Learn the definition, the product, quotient and power rules, change of… Read next Order of Operations: PEMDAS and Ambiguous Expressions PEMDAS is a shared convention, not a law of mathematics. Learn the real precedence rules, the exponent and… Read next Significant Figures: Counting, Rounding, and Precision Significant figures record how precisely a value was measured. Learn the counting rules, the addition and multiplication rules,…

Decision path

Use this guide in a decision

Open Math Decision Center Open companion solver