The short answer: ROI = (gain − cost) ÷ cost. A $1,000 investment that returns $1,200 has a 20% ROI. Simple ROI ignores time; annualized ROI converts it to a per-year rate. For projects with cash flows over time, use NPV or IRR instead of a single ROI.

Key takeaways

  • ROI is a ratio, not a dollar amount.
  • Time matters. A 20% return in one year is not the same as 20% in five.
  • Cash flow timing matters.
  • Include all costs, not only the purchase price.
  • Compare like with like.

The formula

ROI = (final value − initial cost + income) ÷ initial cost. If you invest $5,000, receive $500 in income, and sell for $6,000, the gain is $1,500 and the ROI is 30%. If the investment took three years, the simple annualized return is about 9.1% per year, compounded.

Simple vs annualized

Simple ROI does not account for time. Annualized ROI = (1 + ROI)1/years − 1. A 30% total return over three years is about 9.1% annualized. A 30% return over one year is 30% annualized. The same total return can look very different depending on the holding period.

An example

A marketing campaign costs $10,000 and produces $15,000 in gross profit. ROI is 50%. If the profit arrives over two years, the annualized return is about 22.5%. If the campaign also requires $2,000 of ongoing software, the net gain is $3,000 and the ROI is 30%. Include the ongoing costs.

Cash-flow timing

ROI does not know when the cash arrives. A project that returns $15,000 in year one is better than one that returns $15,000 in year five, even if the total ROI is the same. Use NPV to discount future cash flows, or IRR to find the annualized rate. For simple comparisons, at least note the payback period.

Marketing ROI

Marketing ROI should use incremental profit, not revenue. If a campaign generates $50,000 in revenue but the product has a 40% gross margin, the gross profit is $20,000. Subtract the campaign cost to get the incremental profit. A revenue-only ROI overstates the result.

What ROI misses

It does not capture risk, liquidity, or opportunity cost. A 10% return with high risk may be worse than a 7% return with low risk. It also does not capture the time value of money unless annualized or discounted. Use it as one input, not the whole decision.

Common mistakes

  • Using revenue instead of profit.
  • Ignoring the holding period.
  • Leaving out ongoing costs.
  • Comparing a one-year ROI with a five-year ROI.
  • Ignoring risk and liquidity.

Annualized example

An investment of $10,000 returns $13,000 after three years. The total ROI is 30%. Annualized: (1.30)^(1/3) − 1 = 9.14%. If the return arrives as $1,000 a year for three years plus $10,000 at the end, the simple ROI is different from the IRR because the cash flows arrive earlier. Use IRR for a more accurate annual rate.

NPV and IRR

NPV discounts each cash flow at a required return and subtracts the initial cost. A positive NPV means the project clears the hurdle. IRR is the discount rate that makes NPV zero. Both are better than simple ROI when cash flows vary over time.

Real estate example

A property costs $300,000, earns $18,000 a year in net rent, and is sold for $340,000 after five years. The total gain includes rent and appreciation, but the ROI must account for purchase costs, maintenance, and taxes. A simple ROI can overstate the return if expenses are omitted.

What to compare

Compare ROI, annualized ROI, payback, NPV, and risk. A high ROI with a long payback may strain cash. A lower ROI with a quick payback may be better for a small business.

Cash-flow example

A project costs $50,000 and returns $20,000 a year for four years. Total return is $80,000, so simple ROI is 60% over four years. Annualized simple ROI is about 12.5%. But the cash flows arrive over time; at a 10% discount rate, the NPV is positive but lower than the undiscounted sum. IRR solves for the rate that makes NPV zero.

Payback

Payback is the time to recover the initial cost. $50,000 ÷ $20,000 = 2.5 years. Payback ignores what happens after the payback period and the time value of money. Use it with NPV/IRR, not instead of them.

Risk adjustment

A risky project should clear a higher hurdle. A 12% expected return on a risky project may be worse than a 6% return on a safe one. ROI alone does not adjust for risk; the discount rate does.

What to compare

Compare ROI, annualized ROI, payback, NPV, IRR, and risk. A single ratio cannot capture all four.

ROI vs ROAS

Return on ad spend (ROAS) is revenue ÷ ad spend. It is not ROI, because it uses revenue rather than profit and ignores other costs. A 5× ROAS can still lose money if the gross margin is low or the fulfillment cost is high. Convert ROAS to profit before comparing it with ROI.

Personal investing

For an investment with dividends and price changes, ROI includes both. A stock bought at , sold at , with of dividends, has a 13% ROI before taxes and fees. Add the costs to get the net return.

What to compare

Compare ROI, annualized ROI, payback, NPV, IRR, and risk. A single ratio cannot capture all four.

ROI with taxes and fees

Subtract taxes and fees from the gain before calculating ROI. A 10% gain with a 2% fee and 1% tax is closer to 7% net. The gross ROI can look better than the return the investor keeps.

Use the same net basis when comparing two investments.

Hurdle rate

A business should set a minimum return, or hurdle rate, before approving projects. The hurdle should reflect the risk and the cost of capital. A project below the hurdle is rejected even if its ROI is positive.

Review the hurdle rate when interest rates or risk change.

Review the hurdle rate when the cost of capital or project risk changes, and use the same net basis for every comparison.

Use a higher hurdle for riskier projects and a lower one for projects that reduce risk.

Document the assumption before approving the project.

Compare the project with the next-best alternative, not only with zero.

Opportunity cost is part of the decision.

Review the assumption set when the project scope or financing changes.

Compare the project with the alternative use of the same cash.

The opportunity cost matters.

Review the opportunity cost before approving the project.

Frequently asked questions

What is a good ROI?

It depends on the risk, the holding period, and the alternative. Compare with a relevant benchmark, not a generic number.

How do I annualize ROI?

(1 + total ROI)^(1/years) − 1. For a 30% return over three years, about 9.1% per year.

Is ROI the same as IRR?

No. IRR accounts for the timing of cash flows; simple ROI does not.

Should I use gross or net profit?

Use the profit that the investment actually adds after all relevant costs.

Further reading

Keep exploring

Read next Depreciation: Straight-Line, Declining Balance, and Tax Depreciation spreads an asset's cost over its useful life. Compare straight-line, double declining balance, and MACRS tax depreciation,… Read next Break-Even with Multiple Products: Weighted Contribution Margin Two products with different margins break even on a blended contribution margin. See how the unit mix sets… Read next Rule of 40: Growth Plus Margin for SaaS The Rule of 40 adds revenue growth and profit margin into one score. See which margin to use,…

Decision path

Use this guide in a decision

Open Business Decision Center Open companion solver