Skip to content

Fence Post Calculator

Enter the fence run in metres, the post spacing, and the number of gates. The calculator returns line posts, gate posts, the post count with waste, and concrete bags at two bags per post. It is a material takeoff, not a site survey: confirm spacing, corners, and hole size before you buy.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
m

Total run along the fence line, including gate openings.

m

2.4 m is a common panel spacing. Measure from post centre to post centre.

Each gate adds two gate posts to the run.

%

Spare posts for breakage, corners, and miscuts.

Advanced options
bags

Two 20 kg bags of setting mix is a typical quantity for a 200 mm × 600 mm hole.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Advanced inputs used

Method and scope

Result audit

MetricValue

What this calculator does

A fence takeoff looks simple until the gates and the ends are counted properly. Posts do not follow the panel count one for one: a straight run needs a post at each end and one at every spacing interval, and every gate opening needs two heavier gate posts. That is why a 40 m run at 2.4 m spacing needs 18 line posts, not 16. The concrete figure is a separate estimate driven by hole diameter and depth, so the bag count is only as good as the hole you actually dig. This page states the formula, the metric defaults, and the waste assumption so you can check the order against your own plan.

How to use it

  1. Measure the total fence run in metres, including the width of any gate openings.
  2. Enter the post spacing measured from centre to centre. 2.4 m is a common panel spacing.
  3. Enter the number of gates. Each gate adds two gate posts.
  4. Set the concrete bags per post. The default of two 20 kg bags suits a 200 mm × 600 mm hole.
  5. Add a waste allowance for breakage and miscuts, then review the post and bag counts.

How it works

Line posts = ceil(fence length ÷ post spacing) + 1. Gate posts = 2 × gates. Posts before waste = line posts + gate posts. Posts to buy = ceil((line posts + gate posts) × (1 + waste ÷ 100)). Concrete bags = posts to buy × bags per post. Example: 40 m ÷ 2.4 m = 16.67, so 17 spans and 18 line posts; one gate adds two gate posts, giving 20; with 5% waste the order is 21 posts and 42 bags.

Example calculations

Example 1: 40 m run, 2.4 m spacing, one gate

40 ÷ 2.4 = 16.67, rounded up to 17 spans, plus one end post gives 18 line posts. One gate adds two gate posts, so 20 posts before waste. A 5% allowance raises the order to 21 posts, and two bags per post gives 42 bags of concrete.

Example 2: 24 m run, 2.4 m spacing, no gates

24 ÷ 2.4 = 10 spans, plus one end post gives 11 posts. With no waste allowance the order stays at 11 posts and 22 bags. This is a clean multiple of the spacing, so no partial panel is created.

Example 3: 60 m run, 3 m spacing, two gates, 10% waste

60 ÷ 3 = 20 spans, plus one end post gives 21 line posts. Two gates add four gate posts, so 25 before waste. A 10% allowance raises the order to 28 posts, and 56 bags at two bags per post.

What the result means

The post count is a purchase quantity, not a layout drawing. It assumes a straight run on ground where spacing can be kept uniform. Corners, changes in elevation, and short closing panels usually add posts, because a panel that does not fit the module needs a post to land on. Gate posts carry the gate leaf and its swing, so they are often larger and set deeper than line posts; the concrete estimate here uses the same two bags for every post, which is a starting point rather than a specification. If your local code, fence height, wind exposure, or soil type requires deeper holes or larger posts, the concrete volume rises quickly because it scales with the square of the hole diameter.

Common mistakes

  • Counting one post per panel and forgetting the post at the end of the run.
  • Using the panel width as the post spacing when the two are different.
  • Forgetting that each gate needs two gate posts, not one.
  • Buying concrete for a 200 mm hole and then digging a 300 mm hole.
  • Setting posts without checking local height limits, setbacks, or the property line.

Assumptions and limits

  • The fence run is straight and the spacing can be held uniform.
  • The fence length includes gate openings, which are part of the run.
  • Each gate adds two gate posts and no extra line posts.
  • Concrete is two 20 kg bags per post, enough for a 200 mm × 600 mm hole in normal soil.
  • Waste is applied to the post count and therefore to the bag count.

Frequently asked questions

How many posts do I need for a fence?

Divide the fence length by the post spacing, round up, add one for the final end post, and add two posts for every gate. Then add your waste allowance. A 40 m run at 2.4 m spacing needs 18 line posts before gates.

Should I use post spacing or panel width?

They are different numbers. Post spacing is the centre-to-centre distance you set; panel width is the width of the panel that fills the gap. Panels are often slightly narrower than the spacing so they can be fixed to the posts. Enter the spacing in this calculator.

Why do gates add two posts?

A gate opening is framed by a post on each side. Those posts carry the gate leaf, the hinges, and the latch, so they are usually larger and set deeper than line posts. A double gate needs the same two hinge-side posts plus a meeting post or drop rod.

How much concrete does a fence post need?

It depends on the hole, not the post. A 200 mm diameter hole 600 mm deep takes about 0.019 m³ of concrete, which is roughly two 20 kg bags of setting mix. A wider or deeper hole needs proportionally more; a 300 mm hole takes more than twice as much as a 200 mm hole at the same depth.

Does the calculator add waste to the concrete?

Yes, indirectly. The waste allowance increases the post count, and the bag count follows the increased post count, so the order covers spare posts and their concrete. It does not add a separate allowance for spillage or over-digging.

Can I use this for a chain-link or metal fence?

The post arithmetic still applies, but the concrete and post sizes do not. Chain-link and steel posts use different footing details and hardware, so treat the post count as a starting point and use the manufacturer's setting instructions.

Sources

This calculator is an educational material estimate. It is not a site plan, engineering design, or building permit. Post spacing, footing depth, and concrete quantity depend on fence height, wind load, soil, frost depth, and local code; confirm the design with a qualified contractor or building official before digging or buying.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.