Skip to content

Paint Coverage Calculator

Enter the area to paint, the number of finish coats, and the coverage printed on the label. The calculator reports the gallons needed, whole cans to buy, leftover paint, and cost. In the default case 800 sq ft at two coats and 350 sq ft per gallon needs 5 one-gallon cans.

Updated 2026-11-21 Editorial estimate Calccc Editorial Team Free · No sign-up
sq ft

Wall plus ceiling area, after subtracting doors and windows.

Most colour changes need two coats.

sq ft/gal

Take this from the paint label. Flat paints usually cover more than gloss.

$

Primer is assumed to cover 90% of the paint coverage rate.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Paint labels state coverage in square feet per gallon, but the can you buy is a fixed size, so the real question is how many cans to carry home. This calculator converts area and coats into gallons, then rounds up to whole cans and shows how much paint is left over. The leftover matters: it is the paint you paid for and did not use, and it is also the margin for touch-ups.

How to use it

  1. Enter the paintable area, subtracting doors and windows.
  2. Choose the number of finish coats; two is typical for a colour change.
  3. Enter the coverage per gallon from the paint label.
  4. Pick the can size you plan to buy.
  5. Add the price per can and any primer coats.

How it works

Gallons = area × coats / coverage per gallon. Primer gallons = area × primer coats / (coverage × 0.9). Cans = ceil(total gallons / can size). Cost = cans × price per can. Example: 800 sq ft × 2 coats / 350 sq ft per gallon = 4.57 gallons, which rounds up to 5 one-gallon cans at $38 each, or $190.

Example calculations

Example 1: a two-coat room

800 sq ft at two coats with 350 sq ft per gallon needs 4.57 gallons, so 5 one-gallon cans at $38 cost $190. The purchased volume is 5 gallons and 0.43 gallons are left over, which is enough for touch-ups and a second look at thin spots.

Example 2: a single coat in five-gallon cans

1,200 sq ft at one coat with 400 sq ft per gallon needs 3 gallons. Buying one five-gallon can at $170 covers it with 2 gallons left, which is cheaper than three single gallons only if you have another use for the rest.

Example 3: adding primer

600 sq ft at two coats with 300 sq ft per gallon needs 4 gallons of finish paint. One primer coat at 90% of that coverage needs 2.22 gallons. The total is 6.22 gallons, which rounds up to 7 one-gallon cans at $40, or $280.

What the result means

Coverage is the weakest number in the calculation because it is a lab figure for a smooth, primed surface. New drywall, bare wood, stucco, and deep colour changes all absorb more paint, and sprayers lose more to overspray than rollers. That is why rounding up to whole cans is not waste: it is the practical buffer. The leftover percentage shows how efficiently the cans fit the job; a very low figure means the last can is mostly used, while a very high figure means you are buying a lot of extra.

Common mistakes

  • Using the ceiling height times the room perimeter and forgetting openings.
  • Applying the label coverage to a bare or porous surface.
  • Buying quarts for a job that needs gallons, at a higher unit price.
  • Forgetting primer when the colour change is dramatic.
  • Ignoring that the last can may be mostly leftover.

Assumptions and limits

  • The entered area already excludes doors, windows, and other unpainted areas.
  • Coverage per gallon comes from the product label for a smooth, primed surface.
  • Primer covers 90% of the finish paint's stated coverage.
  • Can sizes are quarter-gallon, one-gallon, or five-gallon containers.
  • The number of coats is applied evenly across the whole area.

Frequently asked questions

How much area does a gallon of paint cover?

Most interior wall paints claim 300 to 400 sq ft per gallon per coat on a smooth, primed surface. Textured or bare surfaces cover less.

How many coats should I use?

Two coats are standard for a colour change and for even sheen. One coat can work when refreshing the same colour, and three may be needed for deep reds or dramatic changes.

Why does the calculator round up?

Paint is sold in fixed can sizes, so you cannot buy a fraction of a can. Rounding up guarantees enough paint and leaves a margin for touch-ups.

Should primer be counted separately?

Yes. Primer has a different coverage rate and a different job. The calculator applies 90% of the paint coverage to primer as a planning assumption.

How much extra paint should I keep?

Keep a quart of each colour, labelled with the room and the date. Leftover from the last can is ideal for future touch-ups.

Sources

Educational estimate only, not professional financial, legal, tax, medical, or construction advice. Verify important decisions with a qualified professional.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-21

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; coverage assumptions follow typical manufacturer labels.