What this calculator does
A rainwater tank is sized around three numbers: how much rain the roof can catch, how much water the household uses, and how long a dry spell the tank must bridge. The catchment yield is roof area times rainfall times a runoff coefficient. Because 1 mm of rain on 1 m虏 is 1 litre, the arithmetic is straightforward in metric units. This calculator estimates annual harvest, average monthly yield, tank buffer days, and the share of annual use that the harvest could cover. It is a planning tool, not a plumbing or potable-water design.
How to use it
- Enter the plan area of the roof that drains to the tank.
- Enter the average annual rainfall for your location.
- Choose a runoff coefficient, typically 0.75 to 0.9 for a pitched roof with gutters.
- Enter the tank size and the daily water use from the tank.
- Enter the local water price per cubic metre to estimate the saving.
How it works
Example calculations
Example 1: 120 m虏 roof with 800 mm of rain
The harvest is 76,800 L a year, or 6,400 L a month on average. A 5,000 L tank holds 25.0 days of use at 200 L a day, and the harvest covers 100% of the 73,000 L annual use.
Example 2: Smaller roof, lower rainfall, higher use
An 80 m虏 roof at 600 mm with a 0.75 coefficient yields 36,000 L a year. At 300 L a day the annual use is 109,500 L, so the harvest covers only 32.9% of demand. The 3,000 L tank is 10.0 days of buffer.
Example 3: Large roof with high rainfall
A 200 m虏 roof at 1,200 mm with a 0.85 coefficient yields 204,000 L a year, well above the 54,750 L annual use. The 10,000 L tank holds 66.7 days at 150 L a day, but the tank still overflows in wet months unless it is sized for seasonal storage.
What the result means
The annual harvest is a ceiling, not a guarantee. Rainfall arrives in bursts, and a tank that is already full cannot capture the next storm. First-flush diversion, leaf screens, evaporation, and overflow all reduce usable yield. A tank sized only on annual totals can run dry in a dry month even when the yearly number looks generous. For potable use, the water needs filtration and disinfection, and local rules may restrict or require specific treatment. For garden use, the calculation is usually enough to compare a tank size with a typical dry spell.
Common mistakes
- Using the sloped roof area instead of the plan area that drains to the tank.
- Assuming every drop reaches the tank and ignoring first-flush losses.
- Sizing the tank on annual rainfall without checking the dry-season buffer.
- Forgetting that a full tank overflows during heavy rain.
- Treating harvested water as potable without proper treatment.
Assumptions and limits
- The roof area drains to the tank and the gutters can carry the flow.
- The runoff coefficient captures typical losses.
- Rainfall is an average year, not a specific forecast.
- Daily use is steady across the year.
- The water price is the marginal cost per cubic metre.
Frequently asked questions
How much water can 1 mm of rain produce?
One millimetre of rain on one square metre produces about one litre, before losses. A 100 m虏 roof in a 10 mm shower has the potential for about 1,000 litres, less the runoff coefficient and first-flush losses.
What runoff coefficient should I use?
A pitched metal or tile roof with gutters is often around 0.8 to 0.9. A rough or flat roof can be lower. The coefficient also depends on how much water is diverted before it reaches the tank.
How do I size a tank?
Look at both annual yield and the longest dry spell. A tank that covers annual use on paper can still empty in a dry month. Use monthly rainfall data and the daily demand to test the buffer.
Can I drink harvested rainwater?
Not without appropriate treatment. Rainwater can contain microbes, dust, and contaminants from the roof. Potable systems need filtration, disinfection, and compliance with local rules.
Does the saving include sewer charges?
No. The calculator uses the water price you enter. If your bill includes a sewer charge based on water use, the true saving may be higher, but the tariff structure varies.
Why does the tank overflow in wet months?
A tank can only store its volume. Once full, additional rain bypasses or overflows. Seasonal storage or a larger tank can capture more, but the economics depend on the dry-season demand.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.