What this calculator does
Packing estimates go wrong in both directions: too few boxes means a second trip to the shop in the middle of a move, and too many means paying for cardboard you will never use. This calculator builds a box count from the size of the home and the number of people, then adds a spare allowance for awkward items and the first night. It converts the boxes into tape, bubble wrap, and labels using per-box estimates, and rounds up to standard rolls. The result is a shopping list, not a precise inventory. A kitchen with glassware and a bookshelf can use more boxes than a bedroom, while a furnished flat with little storage can use fewer. Adjust the boxes-per-room figure to match your actual contents and keep receipts so unused supplies can be returned.
How to use it
- Count the rooms that need packing, including the kitchen, living room, and bathrooms.
- Set a realistic boxes-per-room figure; a bedroom is often 5–10 boxes, a kitchen 10–15.
- Enter the number of people moving, which adds boxes for personal items.
- Add extra boxes for cleaning supplies, the first night, and awkward items.
- Choose a spare allowance of 10% or more for mistakes and last-minute items.
- Use the tape and bubble wrap estimates as a starting order, then check the rolls you already have.
How it works
Example calculations
Example 1: A three-room move for two people
Three rooms at 8 boxes each is 24 boxes, plus 4 for two people and 5 extra, for a base of 33. With a 10% allowance the order is 37 boxes, 44.4 m of tape, 14.8 m² of bubble wrap, and 37 labels.
Example 2: A six-room family move
Six rooms at 12 boxes each is 72 boxes, plus 8 for four people and 10 extra, for a base of 90. A 15% allowance brings the order to 104 boxes, 124.8 m of tape, and 41.6 m² of bubble wrap. The tape estimate rounds to 3 standard rolls.
Example 3: A single-room move
One room at 5 boxes is 5 boxes, plus 2 for one person and 2 extra, for a base of 9. With a 5% allowance the order is 10 boxes, 12.0 m of tape, and 4.0 m² of bubble wrap. Small moves still need labels and a tape roll.
What the result means
The boxes-per-room figure is the most important input. A bedroom with a wardrobe, books, and decorations can easily exceed ten boxes, while a sparsely furnished room may need five. The people factor adds a small number of boxes for personal items and the first night, not a full room. The spare allowance covers measuring mistakes, damaged boxes, and the items you forgot. Tape and bubble wrap are rough per-box averages; heavy or fragile items need more, while soft furnishings need less. The roll conversion assumes 50 m tape rolls and 50 m² bubble wrap rolls, so check the actual pack size before ordering.
Common mistakes
- Underestimating the kitchen, books, and glassware, which use more boxes than a bedroom.
- Forgetting the first-night box with bedding, toiletries, and chargers.
- Buying only the calculated boxes with no spare for mistakes and damaged boxes.
- Ignoring the tape needed for bottom and top seams on every box.
- Using the same bubble wrap estimate for fragile and non-fragile items.
- Forgetting labels, markers, and a box cutter in the supplies order.
Assumptions and limits
- The rooms-per-boxes figure is an average across the home.
- People add a small number of personal boxes, not a full room each.
- Extra boxes cover cleaning supplies, the first night, and awkward items.
- The spare allowance covers mistakes and last-minute additions.
- Tape and bubble wrap are used at the stated rate per box.
- Rolls are 50 m of tape or 50 m² of bubble wrap.
Frequently asked questions
How many boxes do I need to move a house?
It depends on the size and contents. A three-room move for two people is about 37 boxes with a spare allowance. A six-room family move can exceed 100. Use the boxes-per-room figure that matches your actual contents, not a generic average.
How much tape do I need per box?
About 1–1.5 m per box if you tape the bottom and top seams. Heavy boxes need more. The calculator uses the rate you enter and converts the total to 50 m rolls.
How much bubble wrap should I buy?
It depends on how much fragile material you have. The default is 0.4 m² per box, which covers light protection. Wrap glassware and electronics more generously, and use paper or towels for bulky items that do not need bubble wrap.
Should I use small, medium, or large boxes?
A mix is best. Small boxes for heavy items such as books and tools, medium boxes for general household items, and large boxes for light, bulky things such as bedding. Heavy items in large boxes are difficult and unsafe to lift.
Can I return unused boxes?
Many suppliers accept returns of unused boxes in original condition, but policies vary. Keep the receipt and do not tape the boxes you might return. The spare allowance is deliberately modest so you are not left with a stack of unused cardboard.
Does the calculator include furniture covers and mattress bags?
No. It covers boxes, tape, bubble wrap, and labels. Furniture covers, mattress bags, wardrobe boxes, and specialist crates are separate items; add them to the order based on the furniture you are moving.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.