What this calculator does
Homeowners insurance is usually built around replacement cost, not market value. Market value includes the land and what a buyer will pay; replacement cost is what it would take to rebuild the structure at current local prices, plus fees, demolition, and in many policies the contents. Those numbers can differ sharply, especially where land is expensive or construction costs have risen. This calculator builds a replacement-cost estimate from the floor area and a cost per square metre, adjusts for basic, standard, or premium quality, and adds design and permit fees, demolition and debris, and a contents allowance. It then compares the total with the dwelling coverage you entered so you can see a possible shortfall or surplus.
How to use it
- Enter the finished floor area of the home in square metres.
- Enter a local rebuild cost per square metre, not the purchase price per square metre.
- Choose the build quality that best matches the home.
- Add the value of contents and belongings covered by the policy.
- Adjust the design, permit, and debris percentages if your estimate has them.
- Compare the total replacement cost with the dwelling coverage on your policy.
How it works
Example calculations
Example 1: A 150 m² standard home
At 150 m² and $1,800/m², the structure cost is $270,000. Add 8% fees ($21,600), 5% debris ($13,500), and $60,000 of contents for a total of $365,100, or $2,434/m². Dwelling coverage of $450,000 is $84,900 above the estimate, so the policy is not underinsured on these inputs.
Example 2: A premium 180 m² rebuild
A 180 m² home at $2,000/m² has a base of $360,000. The premium quality factor of 1.25 raises the structure cost to $450,000. With 10% fees ($45,000), 6% debris ($27,000), and $80,000 of contents, the total is $602,000. Coverage of $400,000 leaves a $202,000 shortfall.
Example 3: A smaller basic home
A 90 m² home at $1,500/m² has a base of $135,000. The basic quality factor of 0.85 gives $114,750 for the structure. Fees of 6% ($6,885), debris of 4% ($4,590), and $30,000 of contents give $156,225, or about $1,736/m². Coverage of $200,000 is $43,775 above the estimate.
What the result means
The replacement cost is the amount to rebuild, not the amount to buy the home. A surplus means the coverage entered is above the estimate; a shortfall means the policy may not pay for a full rebuild at these inputs. The per-square-metre figure is useful for comparing the estimate with local builder quotes. Replacement cost is sensitive to quality, site access, code upgrades, and the cost of materials and labour, so a single number is a starting point. Ask an insurer or quantity surveyor for a replacement-cost valuation, and review the coverage after renovations or major price changes. The contents allowance is separate from the dwelling limit on many policies, so check how your policy structures the two.
Common mistakes
- Using the market value or purchase price as the replacement cost.
- Using a national average cost per square metre instead of a local rebuild cost.
- Forgetting design fees, permits, demolition, and debris removal.
- Insuring only the structure and leaving contents uninsured or underinsured.
- Ignoring code upgrades, foundations, driveways, and outbuildings.
- Never updating the coverage after a renovation or a rise in construction costs.
Assumptions and limits
- The floor area is the finished area to be rebuilt, not the lot size.
- The rebuild cost per square metre reflects local labour and materials.
- The quality factor captures the difference between basic, standard, and premium finishes.
- Fees and debris are percentages of the structure cost.
- Contents are covered at the value entered and are not subject to a separate sub-limit.
- The estimate excludes land value, outbuildings, landscaping, and temporary living costs unless entered.
Frequently asked questions
Is replacement cost the same as market value?
No. Market value includes the land and what a buyer will pay. Replacement cost is what it would take to rebuild the structure at current local prices, plus fees and other costs. They can differ substantially.
How do I find the rebuild cost per square metre?
Ask local builders or a quantity surveyor, or use a replacement-cost valuation from an insurer. Regional construction-cost data can help, but local conditions such as access, foundation type, and code requirements matter.
Does homeowners insurance cover the contents?
Many policies include contents cover as a separate limit or a percentage of the dwelling limit. Check the policy. This calculator adds the contents value to the replacement cost, but the policy may cap or exclude certain items.
Why add design fees and debris?
A rebuild often needs design work, permits, and demolition of the damaged structure. Those costs are part of the project even though they are not part of the finished floor area. The percentages let you include them without a separate line.
What if my coverage is higher than the estimate?
A surplus is not necessarily wasted. Rebuild costs can rise, and the estimate may omit items such as code upgrades or outbuildings. Review the policy with an insurer rather than reducing coverage automatically.
How often should I review replacement cost?
Review it when you renovate, when local construction costs change noticeably, and at each policy renewal. A coverage amount set years ago may no longer reflect current rebuild costs.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
- Quote differences. The section below explains why a bank, lender, broker, or provider can quote a different number.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Before you use a quote
Why your bank, lender, or provider’s number may differ
A mortgage quote can differ from this estimate even when the loan amount and rate look the same. The lender’s Loan Estimate is the document that controls the actual offer.
What changes the quote
- Rate versus APR. Points, lender credits, and closing costs can make the APR different from the note rate.
- Escrow and insurance. Property tax, homeowners insurance, PMI, and HOA are local and lender-specific.
- Loan-level pricing. Credit score, down payment, occupancy, property type, and loan size can change the rate.
- Timing. Rates can change daily; a quote is not a lock until it is locked in writing.
How to compare offers
- Compare the APR and total cost, not only the monthly payment.
- Ask for a written quote or Loan Estimate with all fees itemized.
- Use the same loan amount, term, date, and assumptions for every offer.
- Check what is excluded: taxes, insurance, closing costs, maintenance, or provider fees.
- Keep an emergency reserve; the lowest payment is not always the safest choice.
Reference: CFPB Loan Estimate explainer.