Skip to content

House Flipping Calculator

Enter what you pay, what you spend on the work, how long you hold, and what the house will sell for. The calculator adds buying costs, renovation, holding costs, and selling costs, subtracts them from the after-repair value, and reports profit, return on cash invested, annualised return, and the maximum offer under the 70% rule.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
$

What you pay for the property, before buying costs.

%

Closing, title, inspection, and loan fees on the purchase, as a share of the price.

$

Materials and labour for the work that raises the value.

mo

From purchase to closing the resale.

$

Taxes, insurance, utilities, and loan interest per month while you own it.

$

The realistic resale price once the work is finished.

%

Agent commission plus seller closing costs, as a share of the resale price.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

Sensitivity check

CaseInputResult

A one-variable sensitivity check, holding every other input constant. It is not a forecast.

What this calculator does

A flip makes money on the spread between what a property costs to buy and fix and what it sells for, minus everything in between. That in-between is where most projects go wrong: buying costs, months of taxes and insurance, loan interest, agent commission, and seller closing costs all arrive before the profit does. The calculator builds the full stack so the profit figure is what is left after every category, not just the visible renovation bill. It also annualises the return, which matters because a 12% profit earned over six months is a very different business from the same 12% earned over eighteen. Finally it applies the 70% rule, a rough screening test used by flippers: offer no more than 70% of the after-repair value minus the renovation budget. The rule is not a valuation, but it forces the offer to leave room for costs, delays, and a margin.

How to use it

  1. Enter the contract purchase price before any buying costs.
  2. Add buying costs as a percentage for closing, title, inspection, and loan fees.
  3. Enter the full renovation budget, including contingency if you keep one separately.
  4. Set the months you expect to hold and the monthly cost of taxes, insurance, utilities, and loan interest.
  5. Enter a realistic after-repair value and the selling costs as a share of that resale price.

How it works

Profit = after-repair value − purchase price − buying costs − renovation − (months held × monthly holding cost) − (after-repair value × selling cost %). In the default case: $380,000.00 −$250,000.00 −$5,000.00 −$45,000.00 −$7,200.00 −$30,400.00 = $42,400.00. The 70% rule offer = 0.70 × $380,000.00 −$45,000.00 = $221,000.00.

Example calculations

Example 1: A $250,000 purchase with a $45,000 renovation

Buying costs are $5,000.00, six months of holding add $7,200.00, and selling costs at 8.0% of the resale price add $30,400.00. All-in before selling is $307,200.00, total cost is $337,600.00, and the profit is $42,400.00. That is a 13.8% return on cash invested, or 27.6% annualised.

Example 2: A $15,000 renovation overrun

Raising the renovation budget to $60,000.00 lifts all-in cost to $322,200.00 and cuts profit to $27,400.00. The return falls to 8.5%. An overrun of roughly a third of the budget removes more than a third of the profit, because the resale value does not move with the cost.

Example 3: A weaker resale market

If the house sells for $340,000.00 instead of $380,000.00, selling costs fall slightly to $27,200.00 but the profit collapses to $5,600.00, a 1.8% return on cash and a 1.6% margin on the sale price. A 10% drop in resale value can wipe out most of a thin flip.

What the result means

The profit number is only useful next to the capital it took to earn it. A flip that returns 13.8% on cash in six months is strong; the same return over two years is mediocre, which is why the annualised figure is shown. Holding costs are the quiet killer: every extra month adds both the monthly cost and interest, and it delays the point at which the capital can be redeployed. The margin on the resale price is another useful check, because it shows how much of the sale price is profit rather than cost, and therefore how much room a price cut would erase. The 70% rule offer is a screening tool, not a promise: in a hot market, deals that satisfy it are rare, and in a soft market it may still be too generous if the renovation is complex. Taxes, financing points, and capital gains are outside this model.

Common mistakes

  • Using the asking price rather than a supported after-repair value from comparable sales.
  • Leaving renovation contingency out of the budget and treating the first estimate as final.
  • Forgetting holding costs such as taxes, insurance, utilities, and loan interest.
  • Underestimating selling costs, which usually include commission plus seller closing costs.
  • Annualising a profit over the planned months instead of the actual months a project takes.
  • Ignoring the tax treatment of the gain and any financing points paid up front.

Assumptions and limits

  • The property sells at the stated after-repair value within the months entered.
  • Renovation is completed for the budget entered, with no structural surprises.
  • Holding costs are constant each month for the whole holding period.
  • Selling costs are a single percentage of the resale price.
  • No rental income is received during the project, and no capital gains tax is deducted.

Frequently asked questions

What is the 70% rule in house flipping?

It is a screening rule of thumb: pay no more than 70% of the after-repair value minus the renovation cost. The remaining 30% is meant to cover buying costs, holding costs, selling costs, and profit. It is a starting filter, not an appraisal.

What counts as a holding cost?

Property taxes, insurance, utilities, loan interest, HOA dues, and any security or lawn care while the house is empty. Add them monthly and multiply by the months you actually expect to own the property.

Should I include my own labour in the renovation budget?

Include the market value of the work even if you do it yourself, because that is what the project would cost otherwise. If you want to see your effective hourly return, compare the profit with and without that line.

Is the annualised return realistic?

It assumes the project finishes in the months entered and the capital is redeployed immediately. Real flips often take longer, and the annualised figure is best used to compare projects with different timelines, not as a forecast.

How accurate is the after-repair value?

Only as accurate as the comparable sales behind it. Use recent sold prices for similar size, condition, and location, and ask an agent or appraiser to sanity-check the figure before you make an offer.

What taxes apply to a flip?

Profits on a property bought and sold quickly are usually taxed as ordinary income or as a business gain rather than as a long-term capital gain, but the rules depend on your situation and holding period. This calculator does not model taxes.

Sources

This is an educational estimate of a fix-and-flip project, not an appraisal, investment recommendation, or tax calculation. Renovation costs, resale values, and timelines vary widely by market, and taxes and financing points are excluded. Verify comparable sales and contractor bids before committing capital.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
  • Quote differences. The section below explains why a bank, lender, broker, or provider can quote a different number.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Before you use a quote

Why your bank, lender, or provider’s number may differ

This calculator gives you a transparent estimate. A bank, lender, broker, fund provider, or tax authority can quote a different number because its inputs, fees, underwriting, and timing are different.

What changes the quote

  • Fees. Providers may charge fees that are not part of the headline rate.
  • Eligibility. Credit, income, collateral, and provider rules change the offered terms.
  • Taxes and insurance. These are often quoted separately and may not be included.
  • Timing. Rates, prices, and eligibility rules can change after the quote.

How to compare offers

  1. Compare the APR and total cost, not only the monthly payment.
  2. Ask for a written quote or Loan Estimate with all fees itemized.
  3. Use the same loan amount, term, date, and assumptions for every offer.
  4. Check what is excluded: taxes, insurance, closing costs, maintenance, or provider fees.
  5. Keep an emergency reserve; the lowest payment is not always the safest choice.

Reference: CFPB Loan Estimate explainer.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.