Skip to content

IRR Calculator

Enter the initial investment, the cash received at the end of each year, the project life, and any terminal value. The calculator solves for the internal rate of return, then compares it with the net present value at your chosen discount rate and shows the cash multiple and simple payback.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
$
$

The net cash received at the end of each year.

yrs
Advanced options
$

Optional resale or salvage value received at the end of the final year.

%

Used for the NPV comparison, not for the IRR itself.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Advanced inputs used

Method and scope

Result audit

MetricValue

Sensitivity check

CaseInputResult

A one-variable sensitivity check, holding every other input constant. It is not a forecast.

What this calculator does

The internal rate of return is the discount rate that makes a project's net present value equal zero. It is widely used because it expresses a project's return as a single percentage that can be compared with a hurdle rate or the cost of capital. The catch is that IRR assumes cash flows are reinvested at the same rate and says nothing about the size of the investment: a small project with a high IRR can create less value than a large project with a lower one. This calculator covers the common simple case of one initial outflow followed by equal annual inflows and an optional terminal value, and it shows NPV alongside IRR so the two measures can be read together.

How to use it

  1. Enter the initial investment as a positive number.
  2. Enter the net cash received at the end of each year.
  3. Set the project life in years.
  4. Add a terminal or salvage value if one is received in the final year.
  5. Compare the IRR with your required return and with the NPV at that rate.

How it works

IRR is the rate r that solves 0 = -initial investment + sum of annual cash flow / (1 + r)^t for t = 1 to n, plus terminal value / (1 + r)^n. In the default case, $100,000.00 invested for 10 years with $18,000.00 a year gives an IRR of 12.41% and an NPV of $20,781.47 at 8.0%.

Example calculations

Example 1: $100,000 invested for $18,000 a year for 10 years

The IRR is 12.41%, above the 8.0% comparison rate, so NPV is positive at $20,781.47. Total cash returned is $180,000.00, a cash multiple of 1.80x, and simple payback is 5.6 years.

Example 2: A shorter project with a terminal value

Investing $100,000.00 for $30,000.00 a year over 5 years, plus a $40,000.00 terminal value, produces an IRR of 22.29% and an NPV of $47,004.63 at 8.0%. The terminal value is a large share of the total return, so it deserves a separate sensitivity check.

Example 3: A project that does not earn back its cost

With only $5,000.00 a year for 10 years, the IRR is -10.96% and the NPV at 8.0% is $-66,449.59. Total cash returned is $50,000.00, less than the initial investment, so the project destroys value on these assumptions.

What the result means

A project is attractive when its IRR is above the return required for its risk, and the NPV at that required return should then be positive. The two measures usually agree for a conventional project with one sign change in the cash flows, but they can disagree when projects differ in size or timing. IRR also assumes reinvestment at the IRR itself, which flatters high-return projects. The cash multiple shows the scale of the return, and the simple payback shows how long the capital is at risk. Use the IRR as one input alongside NPV, payback, and a sensitivity analysis rather than as a decision rule on its own.

Common mistakes

  • Comparing an IRR with a bank deposit rate instead of a risk-matched hurdle rate.
  • Ignoring the size of the investment when comparing two projects.
  • Forgetting that IRR assumes reinvestment at the same rate.
  • Using cash flows that change sign more than once without checking for multiple IRRs.
  • Treating an estimated terminal value as certain.

Assumptions and limits

  • There is one initial outflow at time zero.
  • The same net cash inflow arrives at the end of each year.
  • The terminal value, if any, is received in the final year.
  • Cash flows are reinvested at the IRR.
  • Taxes, financing costs, and inflation are already reflected in the cash flows.

Frequently asked questions

What is a good IRR?

There is no universal number. A project should clear the return required for its risk, which might be a few percent for a safe asset or much higher for a speculative venture. The comparison rate in the calculator is a placeholder for your own hurdle rate.

Why is NPV also shown?

NPV and IRR usually point the same way, but NPV measures value created in money while IRR measures a percentage return. When projects differ in scale, NPV is the better guide to how much wealth is added.

Can IRR be negative?

Yes. If the total cash returned is less than the investment, the IRR is negative. The calculator will show a negative rate when the project fails to earn back its cost within the project life.

What if the cash flows change sign more than once?

A project with alternating inflows and outflows can have more than one IRR, which makes the measure ambiguous. This calculator assumes a conventional pattern of one outflow followed by inflows; for irregular cash flows, use NPV.

How does the terminal value affect the result?

A terminal value adds cash in the final year, which raises both IRR and NPV. Because it can dominate the result, test the project with and without it rather than relying on a single optimistic estimate.

Is IRR the same as return on investment?

No. ROI is usually total profit divided by cost, ignoring timing. IRR accounts for when each cash flow arrives, so it is a time-weighted annual return. Both can be useful, but they answer different questions.

Sources

This calculator is an educational project-appraisal tool. It assumes conventional cash flows and reinvestment at the IRR. It is not investment advice; real decisions should include taxes, financing, risk, and sensitivity analysis.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
  • Quote differences. The section below explains why a bank, lender, broker, or provider can quote a different number.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Before you use a quote

Why your bank, lender, or provider’s number may differ

This calculator gives you a transparent estimate. A bank, lender, broker, fund provider, or tax authority can quote a different number because its inputs, fees, underwriting, and timing are different.

What changes the quote

  • Fees. Providers may charge fees that are not part of the headline rate.
  • Eligibility. Credit, income, collateral, and provider rules change the offered terms.
  • Taxes and insurance. These are often quoted separately and may not be included.
  • Timing. Rates, prices, and eligibility rules can change after the quote.

How to compare offers

  1. Compare the APR and total cost, not only the monthly payment.
  2. Ask for a written quote or Loan Estimate with all fees itemized.
  3. Use the same loan amount, term, date, and assumptions for every offer.
  4. Check what is excluded: taxes, insurance, closing costs, maintenance, or provider fees.
  5. Keep an emergency reserve; the lowest payment is not always the safest choice.

Reference: CFPB Loan Estimate explainer.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.