What this calculator does
Naismith's rule is the classic mountain-walking estimate: allow about one hour for every five kilometres on the flat, plus one hour for every 600 metres of ascent. Modern versions separate the flat pace, the climbing rate, and the descent, because a steep descent is slower than level walking for most people. This calculator does that and adds planned breaks, so the result is a realistic duration rather than a best case. It is a planning tool, not a guarantee: terrain, altitude, pack weight, weather, navigation, and group pace can all add hours. Use it to decide whether a route fits the daylight and to set a turnaround time that leaves a margin.
How to use it
- Enter the total distance from the map or route guide.
- Add the total ascent and descent, not the net elevation change.
- Set a flat walking speed that matches your usual pace with a pack.
- Adjust the climbing and descent rates for your fitness and the terrain.
- Add planned breaks and compare the total with the daylight available.
How it works
Example calculations
Example 1: 12 km with 600 m of ascent and descent
Flat distance takes 160 minutes, the climb 120 minutes, and the descent 72 minutes. With 30 minutes of breaks the total is 6 h 22 min, and average moving speed is 2.05 km/h.
Example 2: A flat 5 km walk at 5 km/h
With no ascent, no descent, and no breaks, the estimate is exactly 1 h . This shows the flat-pace component on its own, which is useful for rail trails, canal paths, and city walks.
Example 3: A 20 km mountain day with 1,500 m of ascent
The climb alone takes 300 minutes and the descent 180, on top of 300 minutes on the flat. Including 60 minutes of breaks, the day is 14 h , which is a full day out and needs an early start.
What the result means
The estimate is only as good as its inputs. Most walkers slow down on rough ground, in heat, at altitude, and with a heavy pack, and a group moves at the pace of its slowest member. The ascent figure matters more than the distance on steep routes: 1,000 metres of climbing can add three hours or more. Use the breakdown to see which component dominates, then add a margin for navigation, photos, and the unexpected. For winter conditions, add time for snow, ice, and shorter daylight. Always tell someone your route and expected return time.
Common mistakes
- Using net elevation change instead of total ascent.
- Assuming the descent is as fast as flat walking.
- Leaving out breaks, lunch, and photo stops.
- Using a road walking pace for rough or steep terrain.
- Planning to finish exactly at sunset with no margin.
Assumptions and limits
- The route distance and elevation totals come from a reliable map.
- The flat pace reflects the walker's pace with a pack.
- Climbing and descent rates are constant across the route.
- Breaks are entered as a total, not per hour.
- Weather, altitude, and terrain difficulty are reflected in the rates chosen.
Frequently asked questions
What is Naismith's rule?
Naismith's rule estimates walking time as about one hour per five kilometres on the flat plus one hour per 600 metres of ascent. It was devised in 1892 and is still a useful starting point. This calculator generalises it with separate pace, climbing, and descent rates.
Should descent be counted separately?
Yes for most walkers. Steep descents are slower than flat walking because of careful foot placement and muscle fatigue. A separate descent rate captures that, especially on loose or rocky ground.
How do I estimate total ascent?
Use a mapping app or a route guide that reports cumulative ascent, not the difference between the start and the summit. An out-and-back route with 600 m of climb has 600 m of ascent and 600 m of descent, even though the net change is zero.
Does altitude change the estimate?
It can. Above roughly 2,500 metres many people slow down and need more breaks. The calculator does not model altitude directly, so reduce the pace or increase the break time for high routes.
How much margin should I add?
Add at least 20 to 30 percent for a mountain route, more in winter or with a group. The goal is to finish in daylight with time to spare, not to match the estimate exactly.
Can I use this for running or fastpacking?
It is designed for walking. Runners should use a pace calculator that accounts for grade and effort, because the climbing and descent rates here are walking speeds.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.