What this calculator does
Hearing damage depends on both loudness and duration. An 85 dB average for eight hours is the NIOSH recommended limit; each 3 dB increase halves the allowed time, so 88 dB is allowed for four hours, 91 dB for two, and 94 dB for one. OSHA uses a 5 dB exchange rate with a 90 dB reference, which allows more exposure. This calculator turns a sound level and a daily duration into a percentage of the selected limit and shows the time allowed. It is a screening tool for workplaces, concerts, power tools, and other noisy activities. It does not measure sound, and it cannot account for impulse noise or individual susceptibility.
How to use it
- Enter the average sound level in dB(A) for the activity.
- Enter the hours per day at that level.
- Enter the days per week.
- Choose the NIOSH 3 dB or OSHA 5 dB exchange rate.
- Compare the daily dose with 100% and check the remaining allowed time.
How it works
Example calculations
Example 1: 90 dB for 2 hours
At 90 dB the NIOSH allowed time is 2.52 hours. Two hours is 79.4% of the daily limit, leaving 0.52 hours of allowance. At five days a week the weekly dose is also about 79.4%.
Example 2: 100 dB for 30 minutes
The allowed time at 100 dB is only 15.0 minutes. A 30-minute exposure is 200.0% of the daily limit, already above 100%. The same half hour is much more costly than two hours at 90 dB.
Example 3: 85 dB for 8 hours
At the NIOSH reference level, eight hours is exactly 100.0% of the daily allowance. This is the boundary case. Any increase in level or duration pushes the dose above the recommended limit.
What the result means
The dose is a normalized comparison, not a medical test. A dose at or below 100% stays within the selected limit, but it does not guarantee that hearing is safe for every person. Impulse sounds such as gunshots or hammer blows can be more damaging than their average level suggests, and some people are more susceptible than others. Hearing protection reduces the level at the ear, but real-world protection is often less than the label rating because of fit and wear time. If you already have ringing, muffled hearing, or difficulty understanding speech after noise, get a professional assessment.
Common mistakes
- Using an average level that hides short, very loud peaks.
- Mixing the NIOSH and OSHA exchange rates in one comparison.
- Assuming a hearing-protection label rating applies perfectly in the field.
- Ignoring cumulative weekly exposure from several noisy tasks.
- Treating a dose below 100% as proof that hearing is protected.
Assumptions and limits
- The sound level is a time-weighted average in dB(A).
- Exposure is steady for the hours entered.
- The NIOSH reference is 85 dB with a 3 dB exchange, or OSHA is 90 dB with 5 dB.
- No hearing protection is included in the calculation.
- Impulse noise and individual susceptibility are outside the model.
Frequently asked questions
What is a 3 dB exchange rate?
It means that for every 3 dB increase, the allowed exposure time is halved. NIOSH uses 3 dB with an 85 dB reference for an 8-hour recommended limit.
How is OSHA different?
OSHA's permissible exposure limit uses a 90 dB reference and a 5 dB exchange rate, so it allows more time at the same level. NIOSH is more protective. The calculator lets you choose either.
What does a 100% dose mean?
It means the exposure exactly reaches the selected limit. Above 100% exceeds it; below 100% is within it. The percentage is not a probability of hearing damage.
Can I add doses from different tasks?
You can estimate a combined dose by calculating each task separately and adding the percentages, provided the levels are steady averages. For a precise assessment, use a dosimeter and a qualified occupational-hygiene professional.
Does hearing protection make the exposure safe?
It reduces the level at the ear, but the real protection depends on fit, comfort, and how long you wear it. A protector with a high rating that is worn intermittently may provide much less benefit than expected.
Is this a medical assessment?
No. It is an educational screening calculation based on occupational exposure rules. It does not diagnose hearing loss or replace an audiometric test or a workplace noise assessment.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.