Skip to content

Sweat Rate Calculator

Enter your weight before and after exercise, the fluid you drank, and the session length. The calculator estimates total sweat loss and sweat rate in litres per hour. One kilogram of weight lost is treated as about one litre of fluid, which is the standard field approximation.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
kg
kg
mL
min
Advanced options
mL

Usually small for a session of one to two hours. Set 0 if you did not measure it.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Advanced inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Sweat rate varies enormously between people and between conditions. The same runner can lose 0.5 litres per hour on a cool morning and more than 1.5 litres per hour in heat and humidity. A field test is simple: weigh yourself before and after a session, record how much you drank, and account for urine losses. The change in weight plus the fluid consumed gives total sweat loss, and dividing by the session length gives the hourly rate. This calculator performs that arithmetic and expresses the loss as a percentage of body weight. It is an educational estimate, not a hydration prescription or a medical assessment.

How to use it

  1. Weigh yourself with minimal clothing before the session.
  2. Record the volume of fluid you drink during the session.
  3. Weigh yourself again after the session, ideally after towelling off.
  4. Enter the session length and any urine loss you measured.
  5. Use the hourly rate to compare sessions, not as a fixed target for every day.

How it works

Sweat loss (L) = (weight before - weight after) + fluid intake (L) - urine loss (L). Sweat rate (L/h) = sweat loss / (minutes / 60). Body-weight loss (%) = sweat loss / weight before x 100. In the default case, 70 kg falling to 69.5 kg with 400 mL consumed over 60 minutes gives a sweat rate of 0.90 L/h.

Example calculations

Example 1: 70 kg to 69.5 kg with 400 mL in one hour

Weight loss is 0.5 kg and fluid intake is 0.4 L, so total sweat loss is 0.90 L. Over 60 minutes the rate is 0.90 L/h, or about 225 mL every 15 minutes. Body weight fell by 1.29%.

Example 2: 80 kg to 78.5 kg with 750 mL in 90 minutes

The weight change is 1.5 kg and the fluid intake is 0.75 L, so sweat loss is 2.25 L. The rate is 1.50 L/h. A longer session at a higher rate produces more total loss even though the hourly figure is the number to compare.

Example 3: 60 kg to 59.7 kg with 250 mL in 45 minutes

Sweat loss is 0.55 L over 0.75 hours, a rate of 0.73 L/h. The percentage of body weight lost is 0.92%. Lighter athletes can have lower absolute sweat rates but similar percentage losses.

What the result means

A sweat rate measured in one condition should not be treated as a fixed personal setting. Heat, humidity, intensity, clothing, acclimatisation, and fitness all change it. The useful comparison is between similar sessions, and the useful planning number is the range you see across conditions. Rapid weight loss during exercise is mostly fluid, not fat, so a large drop is a sign to look at hydration rather than a training result. Drinking far more than you sweat can be dangerous; the goal is to replace a sensible share of losses, not to force fluid in. Anyone with a medical condition that affects fluid balance should get individual advice.

Common mistakes

  • Weighing in wet clothing after the session and understating the loss.
  • Forgetting to add the fluid consumed back into the sweat loss.
  • Using a single hot-weather test as a year-round target.
  • Ignoring urine loss during long sessions.
  • Treating the estimate as a medical hydration prescription.

Assumptions and limits

  • One kilogram of body-weight change is approximately one litre of fluid.
  • The pre- and post-session scales are consistent.
  • Fluid intake is measured accurately.
  • Urine loss is either measured or negligible.
  • The session is at a relatively steady intensity.

Frequently asked questions

How accurate is a sweat-rate test?

It is a field estimate, not a laboratory measurement. Scale error, clothing, gut contents, and unmeasured urine all add uncertainty. Repeat the test in similar conditions and look at the range rather than a single number.

Why is one kilogram treated as one litre?

The density of sweat is close to water, so a 1 kg change in body mass is approximately 1 L of fluid. The approximation is standard in sports science and is accurate enough for planning.

Should I drink to match my sweat rate exactly?

Not necessarily. Many guidelines suggest replacing a large share of losses rather than every drop, because overdrinking can dilute sodium levels. Individual needs depend on duration, intensity, and health.

Does sweat rate change with fitness?

Yes. Training and heat acclimatisation can increase sweat rate and make sweat more dilute. Two athletes of the same size can differ by more than a litre per hour.

How do I measure fluid intake?

Use a marked bottle and record how much is missing at the end. If you refill, keep a tally. Estimate bottle volumes rather than guessing from sips.

Is a high sweat rate bad?

Not by itself. Sweat rate is a cooling response and varies widely. The practical issue is replacing fluid and electrolytes sensibly, especially in long or hot sessions. A doctor can advise on individual fluid balance.

Sources

This calculator is an educational field estimate, not medical advice or a hydration prescription. It does not diagnose dehydration, electrolyte problems, or any medical condition. Stop exercise and seek qualified help if you feel unwell.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.