Skip to content

Arc Length Calculator

Enter the radius and the central angle in degrees. The calculator converts the angle to radians and returns the arc length, chord, sector area, and segment area. A 10 cm radius with a 90° angle has an arc of 15.71 cm, a chord of 14.14 cm, and a sector area of 78.54 cm².

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
cm
degrees
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

An arc is a slice of a circle's edge, and the numbers that describe it come from the same two inputs: the radius and the central angle. Arc length is the distance along the curve, the chord is the straight line between the endpoints, the sector is the pie-shaped area, and the segment is the area between the chord and the arc. These figures turn up in fabrication, landscaping, signage, and any layout that follows a curve, and they are easy to get wrong when the angle is in degrees and the formulas expect radians. This calculator does the conversion and returns all four measures together, plus the fraction of the full circle. Angles are measured at the centre, so a 360° angle returns the full circumference and a zero angle returns zero.

How to use it

  1. Enter the radius in the unit you want the answer in.
  2. Enter the central angle in degrees.
  3. Read the arc length first, since it is the main result.
  4. Use the chord for the straight-line distance between the endpoints.
  5. Use the sector and segment areas for material or paint estimates.
  6. Check the fraction of the circle to sanity-check the angle.

How it works

Radians = degrees × π / 180. Arc length = radius × radians. Chord = 2 × radius × sin(radians / 2). Sector area = radius² × radians / 2. Triangle area = radius² × sin(radians) / 2. Segment area = sector area - triangle area. Sector perimeter = arc length + 2 × radius. In the default case: 90° = 1.5708 rad; arc = 10 × 1.5708 = 15.71 cm; chord = 2 × 10 × sin(45°) = 14.14 cm; sector = 78.54 cm²; segment = 28.54 cm².

Example calculations

Example 1: A quarter circle

A 10 cm radius with a 90° angle is a quarter of a circle. The arc is 15.71 cm, the chord is 14.14 cm, and the sector area is 78.54 cm². The segment between the chord and the arc is 28.54 cm². A curved counter or a quarter-round tabletop would use the arc and chord for the cut and the sector area for the surface.

Example 2: A shallow arc

A 5 m radius with a 30° angle gives an arc of 2.62 m and a chord of 2.59 m. The chord is only slightly shorter than the arc because the curve is shallow. The segment area is small, about 0.31 m², which is why shallow arches look almost straight and need less material than a half circle.

Example 3: A half circle

A 2 m radius with a 180° angle gives an arc of 6.28 m, which is half the circumference, and a chord of 4 m, which is the diameter. The sector area is 6.28 m² and the segment area is the same, because the triangle collapses to a line. Sector perimeter is the arc plus the diameter, 10.28 m.

What the result means

Arc length and chord length answer different questions, and mixing them up is the most common error. The arc is the path along the curve, while the chord is the straight distance between the ends; for a shallow angle they are close, and for a half circle the chord is the diameter. Sector area is the pie slice, and segment area is the sliver between the chord and the arc, so the two differ by the area of the triangle formed by the two radii and the chord. All of these formulas assume a perfect circle and an angle measured at the centre. If the angle is given as the angle between the chord and a tangent, or between two chords meeting on the circumference, convert it to the central angle first. For construction, add a waste allowance for the curve and check the chord against the measured opening.

Common mistakes

  • Using degrees directly in the arc length formula instead of radians.
  • Confusing the chord with the arc length.
  • Measuring the angle at the circumference instead of the centre.
  • Using the diameter in place of the radius.
  • Treating the sector area as the segment area.
  • Forgetting to add the straight sides to the sector perimeter.

Assumptions and limits

  • The shape is a perfect circle with a constant radius.
  • The angle is the central angle between the two radii.
  • The angle is between 0° and 360°.
  • The arc is the minor arc unless the angle exceeds 180°.
  • Units are consistent across radius, arc, and chord.
  • Areas are in the square of the chosen length unit.

Frequently asked questions

What is the difference between arc length and chord length?

Arc length follows the curve between two points on a circle, while chord length is the straight line between the same points. The arc is always at least as long as the chord and is only equal when the angle is zero.

Why do I need to convert degrees to radians?

The arc length formula radius × angle only works when the angle is in radians, because a radian is defined as the arc length equal to the radius. One radian is about 57.3°, so using degrees gives an answer that is too large.

How do I find the segment area?

Subtract the area of the triangle formed by the two radii and the chord from the sector area. The calculator does this automatically. For a half circle the triangle collapses and the segment equals the sector.

What is the sector perimeter?

It is the arc length plus the two radii, which form the straight sides of the pie slice. It is not the same as the arc length, and it is not the circumference unless the angle is 360°.

Can I use this for a partial circle in a real object?

Yes, if the object follows a circular arc. Measure the radius from the centre of curvature and the angle at that centre, then add a waste allowance for cutting and finishing, especially if the material has thickness.

How do I find the radius from a chord and a height?

For a segment with chord c and height h, the radius is (c² / 4 + h²) / (2h). That is useful when you can measure the arc but not the centre, such as on a curved wall or a tabletop.

Sources

This calculator is an educational planning tool, not financial, legal, insurance, medical, or professional advice. Results depend on the inputs and on rules that vary by place and provider. Confirm important decisions with a qualified professional and the relevant documents.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.