Skip to content

Polar Coordinates Calculator

Choose the conversion direction, then enter either a radius and angle or an x and y. The calculator returns both coordinate pairs, the angle in degrees and radians, and the quadrant. A radius of 5 at 53.13 degrees gives x = 3 and y = 4, while x = 3 and y = 4 give a radius of 5 and an angle of 53.13 degrees.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
degrees
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Rectangular coordinates describe a point by how far it is along the x-axis and the y-axis. Polar coordinates describe the same point by how far it is from the origin and at what angle. Neither is more correct; each is convenient for different problems. Rectangular coordinates make addition and straight lines easy, while polar coordinates make rotation, circles, and anything with a natural centre easier to write. The conversion is a small piece of trigonometry: x is the radius times the cosine of the angle, and y is the radius times the sine. Going the other way, the radius is the distance from the origin and the angle is the arctangent of y over x, with the quadrant handled correctly. That last detail is where most errors happen, because a plain arctangent cannot tell the second quadrant from the fourth. This calculator uses the two-argument arctangent, normalises the angle, and reports the quadrant explicitly.

How to use it

  1. Choose whether you are converting from polar to rectangular or the reverse.
  2. For polar to rectangular, enter the radius and the angle in degrees.
  3. For rectangular to polar, enter the x and y coordinates.
  4. Read the converted pair and the angle in both degrees and radians.
  5. Check the quadrant, especially when x or y is negative.
  6. Use the radians value if the next step expects radians rather than degrees.

How it works

Polar to rectangular: x = r × cos(theta) and y = r × sin(theta). Rectangular to polar: r = the square root of x squared plus y squared, and theta = atan2(y, x), normalised to 0 to 360 degrees. Theta in radians = theta in degrees × pi / 180. In the default case r = 5 and theta = 53.13 degrees give x = 3.00 and y = 4.00, and the reverse gives r = 5 and theta = 53.13 degrees.

Example calculations

Example 1: The 3-4-5 point

A radius of 5 at 53.13 degrees gives x = 5 × cos(53.13) = 3.00 and y = 5 × sin(53.13) = 4.00. The reverse conversion takes x = 3 and y = 4, gives r = the square root of 9 + 16 = 5, and theta = atan2(4, 3) = 53.13 degrees. This is the most common check because the numbers are exact and the quadrant is unambiguous.

Example 2: A second-quadrant point

The point x = -3, y = 4 has a radius of 5, but the plain arctangent of 4 / -3 is -53.13 degrees, which would put it in the fourth quadrant. The two-argument arctangent returns 126.87 degrees, which is the correct second-quadrant angle. The calculator normalises the result to 0 to 360 degrees and reports quadrant 2, which is the quickest way to catch a sign error.

Example 3: A point on the y-axis

The point x = 0, y = 5 has a radius of 5 and an angle of 90 degrees. The two-argument arctangent handles the zero x value, which a plain y / x ratio cannot. The quadrant is 1 by the calculator's convention because x is zero and y is positive. Points exactly on an axis are a useful test of any conversion because they expose division-by-zero and quadrant logic.

What the result means

The converted pair is the same point expressed in a different basis, so the distance from the origin is always the radius. That invariance is a useful check: if the radius changes after a conversion, something went wrong. Angle convention is the other thing to watch. Mathematicians usually measure theta counterclockwise from the positive x-axis, navigators measure bearings clockwise from north, and some graphics systems measure from the positive y-axis. The calculator uses the mathematical convention, so a bearing-style result needs a further adjustment. Negative radii are sometimes used in polar equations, but this calculator clamps the radius to zero or above and reports the normalised angle instead.

Common mistakes

  • Using degrees in a formula that expects radians, or the reverse.
  • Using a plain arctangent and losing the quadrant when x is negative.
  • Swapping x and y in the conversion.
  • Forgetting that the angle is normalised, so a negative angle becomes a positive one.
  • Entering a diameter where a radius is expected.
  • Rounding the angle before converting, which shifts both coordinates.

Assumptions and limits

  • The coordinate system is two-dimensional and Euclidean.
  • The angle is measured counterclockwise from the positive x-axis.
  • The angle is entered in degrees and the radians output is derived from it.
  • The radius is non-negative.
  • The origin is at (0, 0).
  • The conversion is exact up to the precision of the inputs and the display rounding.

Frequently asked questions

What are polar coordinates?

They describe a point by its distance from the origin, called the radius, and its angle from a reference direction. Rectangular coordinates describe the same point by its x and y distances instead.

Why use atan2 instead of atan?

The single-argument arctangent only returns angles in a range of 180 degrees, so it cannot tell the second quadrant from the fourth. atan2 takes both x and y and returns the correct angle for all four quadrants.

Can the radius be negative?

In some mathematical conventions a negative radius flips the point through the origin, but this calculator uses a non-negative radius and normalises the angle. That keeps the distance-from-origin interpretation simple.

How do I convert between degrees and radians?

Multiply degrees by pi / 180 to get radians, or radians by 180 / pi to get degrees. The calculator shows both so you can use whichever the next step needs.

Which quadrant is the point in?

Quadrant 1 has positive x and y, quadrant 2 has negative x and positive y, quadrant 3 has negative x and y, and quadrant 4 has positive x and negative y. Points on an axis are reported with the convention used by the calculator.

Does this work in three dimensions?

No. This is a two-dimensional conversion. Three-dimensional polar systems use two angles, such as spherical or cylindrical coordinates, and need a different set of formulas.

Sources

This calculator is an educational planning tool, not financial, legal, insurance, medical, or professional advice. Results depend on the inputs and on rules that vary by place and provider. Confirm important decisions with a qualified professional and the relevant documents.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.