Key takeaways
- 1 mph = 0.44704 m/s exactly. The international mile is 1,609.344 m and the hour is 3,600 s.
- m/s × 3.6 = km/h. The factor is 3,600 s ÷ 1,000 m and never varies.
- 1 knot = 1.852 km/h exactly, about 15% faster than 1 mph.
- The nautical mile is 1,852 m, the statute mile 1,609.344 m; mixing them is a 15% error.
- Mach is a ratio, not a unit. The speed of sound changes with temperature.
Speed is distance divided by time
Speed is a scalar: distance travelled per unit time, with no direction attached. Velocity is the vector version and adds direction. The SI unit is the metre per second, a coherent derived unit built from two base units, so every other speed unit converts into it by an exact factor and out again by the reciprocal of another.
Average speed is total distance divided by total time, which is not the same as the average of the speeds over each leg. A car that drives 60 km at 60 km/h and another 60 km at 120 km/h averages 80 km/h, not 90, because it spends twice as long on the slower leg. Instantaneous speed is what a speedometer shows; average speed is what a trip computer computes.
All four units on this page share the same structure — a distance unit over a time unit — so a conversion is really two conversions multiplied together. That view makes the factors auditable: 1 mph is 1,609.344 m over 3,600 s, which is 0.44704 m/s.
Miles per hour and kilometres per hour
The international mile is exactly 1,609.344 m, fixed by the 1959 agreement on the yard and pound. Dividing by 3,600 s gives 0.44704 m/s for one mile per hour, exactly. The miles-per-hour to kilometres-per-hour factor is therefore 1.609344, and the reciprocal is 0.621371192.
In practice: 100 km/h = 62.137 mph; 70 mph = 112.654 km/h; 30 km/h = 18.641 mph; 55 mph = 88.514 km/h. A rough mental check is to multiply km/h by 0.62 or mph by 1.6, which is accurate to about 0.6% and fast enough for a rental-car dashboard.
Vehicle speedometers are permitted to over-read but not under-read in most markets, so the number on the dashboard is usually a little higher than the true speed. Comparing a GPS reading with the speedometer is a better check than comparing two cars.
Knots and the nautical mile
The international nautical mile is exactly 1,852 m, chosen because one minute of latitude is about that length. A knot is one nautical mile per hour: 1,852/3,600 = 0.514444 m/s, exactly. In other units, 1 knot = 1.852 km/h and 1.15078 mph, so a knot is about 15% faster than a mile per hour — close enough to confuse, far enough to matter.
Aviation and marine navigation use knots because the unit ties directly to charts. A vessel making 12 knots covers 12 nautical miles in an hour, and a nautical mile is one minute of latitude on the chart. Wind speeds in marine forecasts and aircraft speeds are also quoted in knots, which makes flight planning arithmetic consistent across charts, winds aloft, and fuel burn.
For intuition: 25 knots is 46.3 km/h, 28.77 mph, or 12.86 m/s. A 100-knot light aircraft is doing 185.2 km/h. An ocean liner at 30 knots is at 55.6 km/h.
Metres per second and the 3.6 factor
Metres per second is what physics uses, and km/h is what road signs use, so the factor 3.6 appears constantly. It comes from 3,600 seconds in an hour divided by 1,000 metres in a kilometre. Multiply m/s by 3.6 to get km/h and divide km/h by 3.6 to get m/s.
The same unit anchors the other conversions. 1 m/s = 2.236936 mph = 1.943844 knots. A 10 m/s wind is 36 km/h, 22.37 mph, or 19.44 knots. A 5 m/s walking pace is 18 km/h, which is brisk; a 1.4 m/s walk is 5 km/h. Track sprinters reach about 10 m/s, and the speed of sound at sea level is about 340 m/s, or 1,224 km/h.
Because m/s is the SI unit, converting everything to m/s and then out to the target unit is the least error-prone route, especially in a spreadsheet where one helper column can hold the SI value.
Worked examples
Convert 25 knots. 25 × 1.852 = 46.3 km/h; 25 × 1.15078 = 28.769 mph; 25 × 0.514444 = 12.861 m/s.
Convert 55 mph. 55 × 1.609344 = 88.514 km/h; 55 × 0.44704 = 24.587 m/s; 55 × 0.868976 = 47.794 knots.
Speed of sound. 340 m/s × 3.6 = 1,224 km/h; × 2.236936 = 760.6 mph; ÷ 0.514444 = 660.9 knots.
Marathon. 42.195 km in 2 h 30 min is 42.195 ÷ 2.5 = 16.878 km/h, which is 10.49 mph or 4.688 m/s.
Road speed. 200 km/h = 124.27 mph = 55.56 m/s = 107.99 knots.
Where speed conversions go wrong
Mixing knots with miles per hour. The 15% gap is easy to miss because the numbers are the same order of magnitude. A 20-knot wind is 23 mph, not 20.
Swapping the nautical and statute miles. 1,852 m against 1,609.344 m is a 15% difference, and it appears in any conversion that borrows a factor from the wrong mile.
Averaging speeds directly. Average speed is total distance over total time. For equal distances at two speeds, the correct average is the harmonic mean, 2v₁v₂/(v₁ + v₂), which is always lower than the arithmetic mean.
Treating Mach as a fixed unit. Mach 1 is about 340 m/s at 15 °C at sea level, about 295 m/s at 11 km altitude, and different again in other gases. It is a ratio to the local speed of sound.
Writing kph or KPH. The correct symbol is km/h. “kph” is common in speech but not in standards, and mixing symbols inside a table invites transcription errors.
Rounding and precision by context
Road speeds are integers, and a 1 km/h rounding is 0.62 mph. Marine and aviation reports round wind and speed to whole knots, sometimes to 5 knots. Vehicle specifications quote 0.1 s acceleration times but whole km/h. Sports timing uses 0.01 s and 0.1 km/h. Pick the precision from the source, not from the conversion: a speed given as “about 60 mph” does not become 96.5606 km/h.
Keep full precision through the arithmetic and round once at the end. Converting mph to km/h and then to m/s through two rounded steps can shift the last digit; converting directly with 0.44704 avoids that. When a value crosses a unit system, state both the unit and the rounding rule, because “100” means different speeds on a German autobahn sign and a US interstate.
Frequently asked questions
How many km/h is 1 mph?
1.609344 km/h, exactly. The international mile is 1,609.344 m.
How fast is 1 knot in mph?
1.15078 mph. One knot is 1.852 km/h and about 0.5144 m/s.
How do I convert m/s to km/h?
Multiply by 3.6. For example, 15 m/s is 54 km/h.
Why do ships and aircraft use knots?
Because a knot is one nautical mile per hour, and a nautical mile is one minute of latitude, so speed on the chart and distance on the chart use the same unit.
Is 100 km/h the same as 60 mph?
Almost. 100 km/h is 62.14 mph, and 60 mph is 96.56 km/h. The two are close enough to be confused and different enough to matter at a speed limit.
Does altitude change the conversion?
No, the unit factors are fixed. Altitude changes the speed of sound, which changes the Mach number, but not the conversion between mph, km/h, m/s, and knots.
Further reading
Keep exploring
Decision path