What this calculator does
The three common temperature scales disagree about where zero sits and how big a degree is. Celsius and Kelvin use the same degree size but different zero points, while Fahrenheit uses a smaller degree and a different zero. That is why a conversion needs both a multiplier and an offset. This page converts among all three scales and shows the result on each one, which makes it easy to sanity-check weather, cooking, and lab values.
How to use it
- Enter the temperature value.
- Choose the scale you are converting from.
- Choose the scale you want to convert to.
- Read the converted value and the same temperature on all three scales.
- Check that the result is at or above absolute zero.
How it works
Example calculations
Example 1: 0 degrees Celsius
0 C is the freezing point of water at standard pressure. It converts to 32 F and 273.15 K.
Example 2: 98.6 degrees Fahrenheit
Subtract 32 to get 66.6, then multiply by 5/9 to get 37 C. Add 273.15 for 310.15 K. This is often cited as a typical body temperature, though normal values vary by person and method.
Example 3: 300 Kelvin
300 K minus 273.15 is 26.85 C. Multiplying by 9/5 and adding 32 gives 80.33 F. A warm room on the Kelvin scale is still a warm room.
What the result means
Celsius and Fahrenheit are relative scales, so ratios are misleading: 40 C is not twice as hot as 20 C in any physical sense. Kelvin starts at absolute zero, the point where molecular motion is minimal, so it is the scale used in science. The offsets are why a temperature difference converts differently from an absolute temperature: a 10 C difference is an 18 F difference, with no plus 32. Rounding is usually the largest source of small disagreements, since 273 is sometimes used instead of 273.15. For weather, whole degrees are plenty. For cooking, oven thermostats vary by more than the rounding. For lab work, keep the full precision and confirm the standard pressure. Negative values are fine on Celsius and Fahrenheit but not below absolute zero.
Common mistakes
- Adding 32 before multiplying when converting Celsius to Fahrenheit.
- Using 273 instead of 273.15 when precision matters.
- Writing degrees Kelvin instead of kelvin.
- Treating 0 F as the freezing point, which is actually 32 F.
- Converting a temperature difference with the offset included.
Assumptions and limits
- Conversions assume standard atmospheric pressure and no phase change.
- The exact constants 9/5, 5/9, and 273.15 are used.
- Inputs at or above absolute zero are physically meaningful.
- Displayed values are rounded, usually to two decimals.
- Kelvin values are treated as absolute temperatures.
Frequently asked questions
Which is colder, 0 C or 0 F?
0 F is colder. It equals about -17.78 C, while 0 C equals 32 F.
Why does Kelvin have no degree symbol?
Kelvin is an absolute scale defined from absolute zero, so its unit is simply the kelvin, written K. Degree symbols belong to Celsius and Fahrenheit.
What is absolute zero in Fahrenheit?
Absolute zero is 0 K, -273.15 C, or -459.67 F. Nothing can be colder under current physics.
How do I convert a temperature difference?
Multiply by 9/5 or 5/9 only, with no offset. A 10 C change equals an 18 F change.
Can I convert below absolute zero?
The math will produce a number, but it is not physically meaningful. Values below 0 K are outside the model used here.
Is 98.6 F always normal body temperature?
It is a commonly cited average, not a rule for every person. Body temperature varies with the measurement site, time of day, and individual. This page is not medical advice.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Part of a decision center
Conversion Decision Center
See the companion tools, decision guides, and patterns that go with this calculator.
Go deeper
