What this calculator does
Mortar is a mix of cement, sand, and water used to bed bricks and blocks, point joints, and render walls. The mix ratio determines strength and workability: richer mixes with more cement are stronger but less forgiving, while leaner mixes are cheaper and more porous. A takeoff starts from the wet volume of mortar needed and converts it to dry materials using a dry-volume factor that accounts for bulking and voids. This calculator does that in metric units, reports cement in 25 kg bags, and estimates water from the cement weight. It is an estimating aid; the project specification and the sand moisture content always take precedence.
How to use it
- Estimate the wet volume of mortar needed for the work.
- Choose the cement-to-sand ratio specified for the project.
- Set the water-cement ratio for the required workability.
- Adjust the dry-volume factor if your sand bulks differently.
- Add a waste allowance and order cement in whole bags.
How it works
Example calculations
Example 1: 0.5 m³ of 1:4 mortar
The dry volume is 0.732 m³ after the dry factor and waste. That splits into 210.7 kg of cement and 936.3 kg of sand, with 105.3 L of water. Ordering 9 bags covers the cement with a small margin.
Example 2: 2 m³ of a stronger 1:3 mix
A richer mix uses more cement: 957.6 kg, or 39 bags, plus 3,192.0 kg of sand. The water demand rises with the cement weight to 478.8 L.
Example 3: 1 m³ of a lean 1:6 mix
The leaner mix needs only 301.0 kg of cement (13 bags) but 2,006.4 kg of sand. Lean mixes are economical for light bedding but are not suitable where strength or weather resistance is required.
What the result means
The output is a materials estimate, not a specification. Mortar class, cement type, sand grading, and the required bond strength are usually defined by the project engineer or building code, and substituting a different ratio can change durability and appearance. Water should be added gradually: the calculated amount is a guide, and the actual demand depends on sand moisture. Mixing more than can be used within its working life wastes material, so batch in realistic quantities. Cement is sold in bags, and the rounded bag count already includes a small buffer from the waste allowance.
Common mistakes
- Using wet volume directly as dry material volume.
- Ignoring sand bulking and moisture when batching by volume.
- Choosing a ratio by habit rather than the project specification.
- Adding all the calculated water at once and over-wetting the mix.
- Mixing more mortar than can be used before it sets.
Assumptions and limits
- The wet volume is the finished mortar volume in place.
- The dry-volume factor reflects local sand bulking and voids.
- Bulk densities are representative of the materials supplied.
- The water-cement ratio is a workability guide, not a strength guarantee.
- Cement is supplied in 25 kg bags and rounding up is acceptable.
Frequently asked questions
What is the difference between mortar and concrete?
Mortar is cement, sand, and water; concrete adds coarse aggregate such as gravel. Mortar is used to bond masonry and to render, while concrete is used for structural elements. The mix ratios and dry-volume allowances differ.
What does the 1:4 ratio mean?
One part cement to four parts sand by volume. A 1:3 mix is richer and stronger, and a 1:6 mix is leaner. The right ratio depends on the masonry unit, exposure, and the specification.
Why is the dry volume larger than the wet volume?
Dry sand and cement bulk up and contain voids, so more dry material is needed to produce a given volume of compacted mortar. The dry factor of about 1.33 is a common allowance, but it varies with the sand.
How much water should I add?
Start with about half the cement weight and adjust for workability. The calculated volume is a starting point; sand moisture, ambient temperature, and mixing time all change the demand. Avoid adding water to revive a mix that has begun to set.
Can I use this for render or screed?
It is intended for mortar used in masonry and rendering. Screeds and structural concretes have different aggregate requirements and should use a dedicated mix design.
Why are bag counts rounded up?
Cement is sold in whole bags, and running short mid-job is worse than a small surplus. The waste allowance already adds a margin, so the rounded count is normally sufficient.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.