Skip to content

Shower Cost Calculator

Enter the shower length, flow rate, water price, temperature rise, energy price, and heater efficiency. The calculator returns the water and heating cost per shower, the litres and kilowatt-hours used, and the annual cost.

Updated 2026-11-18 Editorial estimate Calccc Editorial Team Free · No sign-up
min
L/min

Older heads can flow 12 to 15 L/min; efficient heads use 6 to 9 L/min.

$/m³
°C

Cold mains water heated to shower temperature. 35 °C suits a 15 °C supply and a 50 °C shower.

$/kWh
Advanced options
%

Set 100 for an electric resistance heater in the tank, lower for a condensing or heat-pump system with standing losses.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Advanced inputs used

Method and scope

Result audit

MetricValue

What this calculator does

A shower costs two things: the water itself and the energy used to heat it. In most homes the heating is the larger share, because raising water by 35 °C takes a lot of energy. Flow rate and duration multiply to give litres, litres and temperature rise give energy, and the two prices give cost. This calculator separates the water and heating lines so it is clear where the money goes. It is a household budgeting tool: the actual cost depends on your tariff, the heater, the incoming water temperature, and how long you really spend in the shower.

How to use it

  1. Time a typical shower and enter the minutes.
  2. Find the shower head's flow rate in litres per minute.
  3. Enter the water price per cubic metre and the energy price per kWh.
  4. Set the temperature rise from the cold supply to the shower.
  5. Enter the heater efficiency and the number of showers per week.

How it works

Litres = minutes x flow rate. Heating energy = litres x 4.186 kJ/kg°C x temperature rise / 3,600 / efficiency. Cost = litres / 1,000 x water price + energy x energy price. In the default case, 72.0 L and 3.26 kWh give $1.16 per shower.

Example calculations

Example 1: An 8-minute shower at 9 L/min

The shower uses 72.0 litres and 3.26 kWh of heating energy, costing $0.18 for water and $0.98 for heating. At 7 showers a week the annual cost is $421.05.

Example 2: A one-minute rinse with no heating

A single litre of water with no temperature rise costs almost nothing: $0.00 per shower. The water line is small, and the heating line is zero because the water is not warmed.

Example 3: A 15-minute shower at 12 L/min and 45 °C rise

The longer, hotter shower uses 180.0 litres and 10.47 kWh, for a total of $3.59 per shower. Raising both duration and flow rate multiplies the cost quickly.

What the result means

The heating line usually dominates, so reducing temperature rise and duration saves more than a small change in water price. A lower-flow head cuts both lines at once, which is why it is a common efficiency recommendation. The efficiency figure matters for heat-pump and condensing systems; for a simple electric resistance tank it is close to 100% at the point of use, but standing losses in the tank and pipework are not included. The incoming water temperature varies by season and climate, so the temperature rise is an average rather than a constant. The annual figure assumes the same shower pattern all year.

Common mistakes

  • Using the shower head's maximum flow rate instead of its real flow.
  • Forgetting that heating is usually the larger cost.
  • Ignoring the temperature rise and assuming the heater's set point.
  • Assuming the annual pattern is constant across seasons.
  • Overstating heater efficiency by ignoring standing losses.

Assumptions and limits

  • Every shower has the same duration and flow rate.
  • The temperature rise reflects the incoming water and the shower temperature.
  • The heater efficiency is constant.
  • The water and energy prices are single rates.
  • Standing losses, pipe runs, and hot-water use elsewhere are excluded.

Frequently asked questions

Is it cheaper to shower or bathe?

It depends on the bath volume and the shower flow rate. A short shower with an efficient head usually uses less water than a full bath, but a long shower at a high flow rate can use more. Compare litres, not minutes.

How much energy does heating water take?

About 4.186 kilojoules per kilogram per degree Celsius, which is 1.16 watt-hours per litre per degree. Heating 72 litres by 35 °C takes roughly 2.9 kWh before efficiency losses.

Does a low-flow shower head save money?

It reduces both water and heating energy, so it usually saves on both lines. The saving depends on how much the flow rate falls and whether the shower duration stays the same.

Why is the heater efficiency in the calculation?

Not all the energy input reaches the water. Heat-pump and condensing systems have different efficiencies, and tank losses reduce the effective figure. Use a value from the system's specification for a realistic estimate.

Can I use this for a household rather than one person?

Enter the number of showers per week for the whole household. The per-shower cost is unchanged, and the annual total scales with the number of showers.

Does the water price include sewer charges?

Often not. Many bills combine water and wastewater charges, and the marginal cost of water may be lower than the total bill suggests. Use the marginal price if you want to estimate the saving from using less.

Sources

This calculator is an educational household-cost estimate. It uses your inputs and does not predict a specific system's consumption. Check your utility bill and water-heater specification for exact figures.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-18

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.