What this calculator does
The UV index is a forecast of how much sunburning radiation reaches the ground at midday. It runs from 0 upward, with 3 to 5 moderate, 6 to 7 high, 8 to 10 very high, and 11 or more extreme. Turning that number into minutes requires two more pieces: how much UV energy a particular skin type can take before redness appears, and how much protection sunscreen adds. The first is described by the Fitzpatrick scale, which groups skin from type I, which burns quickly, to type VI, which rarely burns. The second is the SPF, which extends the tolerable time in theory but is applied far more thinly in practice than the test conditions assume. The result is an estimate of the erythema threshold, not a safe exposure limit. Cloud, altitude, reflection from water or snow, and medications can all change the real number substantially.
How to use it
- Look up the peak UV index for your location and date, usually the midday forecast.
- Choose the Fitzpatrick type that best describes how your skin responds to sun.
- Select the SPF you will actually apply, or none.
- Read the unprotected and protected times, and note the UV band.
- Treat the result as a ceiling, not a target, and reapply sunscreen every two hours.
How it works
Example calculations
Example 1: UV 7 with fair skin
At UV 7.0, the erythemally weighted irradiance is 175 mW/m². Skin type II reaches its threshold in about 24 minutes without sunscreen. With SPF 30 applied properly the theoretical time is longer, but it is capped at 8 hours because no sunscreen should be relied on that long.
Example 2: UV 10 with very fair skin
At UV 10, skin type I can burn in roughly 13 minutes without protection. That is the very high band, where shade and clothing matter more than sunscreen. The estimate assumes midday summer sun with no reflection from water or snow.
Example 3: UV 3 with olive skin
At UV 3, skin type IV reaches its threshold in about 100 minutes, or 1.7 hours. Moderate UV still adds up over a day, especially around midday, and the estimate does not account for repeated exposure without recovery.
What the result means
The estimate is a threshold, not a licence. Skin does not tan safely by burning, and every burn adds to cumulative UV damage regardless of skin type. The multiplying effect of SPF is also weaker in real life than in the formula: people apply about a quarter of the density used in testing, they miss edges and ears, and they do not reapply after swimming or sweating. That is why public health advice is built around shade, clothing, a hat, and sunglasses first, with sunscreen as one layer rather than the only one. The Fitzpatrick scale is a coarse summary, and some medications and conditions increase photosensitivity in ways no skin-type category captures. If a medication leaflet warns about sun sensitivity, treat these numbers as an upper bound only.
Common mistakes
- Treating the estimated burn time as a safe exposure target.
- Assuming SPF multiplies protection linearly in real use.
- Applying sunscreen once and staying out for hours without reapplying.
- Forgetting reflection from water, sand, and snow, which increases UV dose.
- Using the daily maximum UV index for an early-morning or late-afternoon outing.
- Ignoring photosensitising medications and skin conditions.
Assumptions and limits
- The UV index is the peak midday value for the location and date.
- The selected Fitzpatrick type reasonably describes the skin's response.
- Sunscreen is applied generously at the stated SPF and reapplied every two hours.
- No reflection from water, sand, or snow, and no altitude adjustment.
- The estimate ignores photosensitising medications and individual medical conditions.
Frequently asked questions
How accurate is a burn-time estimate?
It is a rough model. Real burn time varies with skin, cloud, altitude, reflection, medication, and how much sunscreen is actually applied. Use it to understand relative risk, not to plan a fixed number of minutes in the sun.
Does SPF 50 give 50 times the protection?
In the laboratory, SPF is measured against a fixed dose with a thick application. In real use, people apply far less, so the practical multiplier is much smaller. Reapplication matters more than the number on the bottle.
What is the Fitzpatrick scale?
A six-point classification of skin based on how it responds to sun, from type I, which always burns and never tans, to type VI, which is deeply pigmented and almost never burns. It is a coarse guide, not a measurement.
Can I tan without burning?
Tanning is a sign of UV damage, not a safe alternative to burning. Any darkening means the skin has been injured, and cumulative exposure raises skin cancer risk regardless of whether a burn occurred.
Does the UV index matter on a cloudy day?
Yes. Thin or broken cloud can let most UV through, and some cloud conditions can briefly increase it through reflection. Check the forecast index rather than judging by how bright it feels.
What should I do at very high or extreme UV?
Avoid direct sun around midday, seek shade, cover up with clothing and a hat, and use sunscreen on exposed skin. The higher the index, the less time unprotected skin can tolerate.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.