Skip to content

Vertical Jump Power Calculator

Enter your standing vertical jump and body mass. The calculator uses the Sayers equation to estimate peak power and derives takeoff velocity, flight time, and work from the jump height. With a 40 cm jump and 75 kg body mass, estimated peak power is 3,771 W, or 50.3 W/kg.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
cm

Standing vertical jump, measured from reach to the highest point touched.

kg
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

A vertical jump is a simple test with a lot of information inside it. The height tells you how high the body travelled, but coaches also want to know how much power produced that height and how quickly the body left the ground. Field equations estimate peak power from jump height and body mass because laboratory force plates are not available in most gyms. The Sayers equation used here is one of the most widely cited, and it is reasonably accurate for a countermovement jump with a hand-on-hip or arm-swing technique. The calculator also shows takeoff velocity, flight time, and the work done against gravity, which makes the physics behind the number visible. It is a training and comparison tool, not a medical test and not a guarantee of sporting performance.

How to use it

  1. Measure standing reach and jumping reach with the same arm position each time.
  2. Subtract standing reach from jumping reach to get the jump height in centimetres.
  3. Use a consistent technique: countermovement or squat jump, but not a mix.
  4. Enter body mass on the day of the test.
  5. Record the result and retest under the same conditions to track change.
  6. Compare power-to-weight rather than absolute power when body mass changes.

How it works

Sayers peak power (W) = 60.7 × jump height (cm) + 45.3 × body mass (kg) − 2055. Takeoff velocity = √(2 × gravity × height), flight time = 2 × velocity ÷ gravity, and work = mass × gravity × height. For 40 cm and 75 kg, the estimate is 3,771 W.

Example calculations

Example 1: A 40 cm jump at 75 kg

The Sayers equation returns 3,771 W, or 50.3 W/kg. Takeoff velocity is 2.80 m/s, flight time is 0.57 s, and the work done against gravity is 294 J. The flight time is a useful check: it is set by the height and should match a video count of about 0.57 seconds.

Example 2: A 60 cm jump at 85 kg

A higher jump and a heavier athlete produce 5,438 W, or 64.0 W/kg. Absolute power rises with body mass, but the relative figure shows the heavier athlete is generating more power per kilogram as well. Takeoff velocity is 3.43 m/s and flight time is 0.70 s.

Example 3: A 25 cm jump at 60 kg

A shorter jump in a lighter athlete gives 2,181 W and 36.3 W/kg. The absolute number is much lower, but relative power is still a fair comparison across body sizes. Use the same equation and technique when comparing athletes or tracking one athlete over time.

What the result means

Absolute power is dominated by body mass, so a larger athlete will usually score higher even if the jump is lower. Power-to-weight is the better number for comparing athletes in sports where carrying mass is a cost. The estimate is only as good as the jump measurement: a wall-and-chalk test, a Vertec, or a jump mat can all give slightly different heights, and arm swing adds several centimetres. Use the same method every time. The equation was not developed for every population, and it does not measure the rate of force development or the contribution of the stretch-shortening cycle. Treat it as a consistent training metric, not a diagnosis or a talent identification test.

Common mistakes

  • Measuring jump height from the floor instead of from standing reach.
  • Using a different arm swing or countermovement on each test.
  • Comparing absolute power between athletes of very different body mass.
  • Testing after a hard session when fatigue lowers the result.
  • Rounding the jump height to the nearest 10 cm and losing the change you want to track.
  • Treating the equation's output as a laboratory-grade force-plate measurement.

Assumptions and limits

  • The jump is a countermovement jump with a consistent technique.
  • Jump height is measured as the difference between standing and jumping reach.
  • Body mass is measured on the test day.
  • Gravity is 9.81 m/s² unless another value is selected.
  • The Sayers equation is appropriate for the athlete's population and training status.
  • The result is an estimate of peak power, not an average or a force-plate reading.

Frequently asked questions

How do I measure vertical jump height at home?

Stand against a wall, reach up with one arm, and mark the highest point. Jump and touch the wall at the highest point, then measure the difference. A Vertec or a jump mat is more consistent, but the wall method works if you use the same reach and landing each time.

What is a good vertical jump?

It depends on age, sex, training history, and sport. Rather than compare with a single number, track your own result over time and compare power-to-weight with teammates or a coach's benchmarks. The calculator does not assign a performance rating.

Why does the calculator ask for body mass?

The Sayers equation uses body mass as a predictor of peak power, and the work calculation needs it. Power-to-weight also requires mass. Use the same scale and time of day for consistent tracking.

Is peak power the same as jump height?

No. Height is the outcome; power is the rate of doing work. Two athletes can jump the same height with different power outputs if their mass or technique differs. The equation estimates power from both height and mass.

Does a higher number mean better athletic performance?

Not necessarily. Sport performance depends on skill, speed, endurance, and tactics as well as jump power. Use the number as one training metric, not a ranking or a selection criterion.

Can I use this calculator for a squat jump?

The Sayers equation was developed for a countermovement jump. A squat jump usually produces a lower height and a different power profile, so the estimate is less appropriate. Pick one technique and stay consistent.

Sources

This is an educational fitness estimate, not medical advice or a diagnostic test. Jump testing carries a risk of injury, and the equation is not valid for every population. Stop if you feel pain and consult a qualified coach or clinician before starting a new training programme.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.