Skip to content

TV Mount Height Calculator

Enter the screen diagonal, aspect ratio, and seated eye height. The calculator finds the screen dimensions and places the centre at eye level. A 140 cm 16:9 TV has a centre height of 105.0 cm, a screen height of 68.6 cm, and a bottom edge at 70.7 cm.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
cm

A 55-inch TV is about 140 cm diagonally.

cm

Measure from the floor to your eyes in the seat you normally use.

Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

The most common mounting mistake is placing the TV too high. A screen centred above eye level forces the viewer to look up, which strains the neck over a long film or a season of episodes. The comfortable starting point is to put the centre of the screen at seated eye height, then adjust slightly for reclining or for a standing setup. This calculator uses the screen diagonal and aspect ratio to work out the actual height and width, then places the centre at the eye height you enter. It also shows the bottom and top edges so you can check clearance above a media unit or a fireplace. The calculation is geometric; it does not account for viewing distance, room lighting, or the mount's tilt range, which are separate decisions.

How to use it

  1. Enter the screen diagonal in centimetres, or convert from inches first.
  2. Choose the aspect ratio; most modern TVs are 16:9.
  3. Measure your seated eye height from the floor.
  4. Read the centre height and the bottom and top edges.
  5. Check that the bottom edge clears furniture and the top edge fits the wall.
  6. Adjust the centre up slightly if you watch from a recliner, and check the mount's tilt.

How it works

Screen height = diagonal / square root of (1 + aspect ratio squared), where the aspect ratio is width divided by height. Screen width = aspect ratio x height. Centre height = seated eye height. Bottom = centre - height / 2; top = centre + height / 2. The default 140 cm 16:9 screen is 68.6 cm tall and 122.0 cm wide.

Example calculations

Example 1: A 140 cm 16:9 TV at 105 cm eye level

The screen height is 68.6 cm and the width is 122.0 cm. With the centre at 105.0 cm, the bottom edge sits at 70.7 cm and the top at 139.3 cm. That leaves a comfortable viewing position for a standard sofa.

Example 2: A 165 cm 16:9 TV at 100 cm eye level

A larger screen is 80.9 cm tall and 143.8 cm wide. With the centre at 100.0 cm, the bottom edge is at 59.6 cm and the top at 140.4 cm. A bigger screen needs more wall space above and below the centre, so check the furniture clearance before drilling.

Example 3: A 100 cm 21:9 ultrawide at 110 cm eye level

The ultrawide screen is only 39.4 cm tall but 91.9 cm wide. With the centre at 110.0 cm, the bottom is at 90.3 cm and the top at 129.7 cm. The wider aspect ratio gives a shorter screen for the same diagonal, which changes the wall coverage more than the height.

What the result means

Centring the screen at eye level is a starting point, not a rule. In the default case the bottom edge is at 70.7 cm, which is above most media units but below a typical fireplace mantel. If the TV must go above a fireplace, the centre will be higher than eye level, and a tilt mount can help, but the neck angle is still a compromise. The viewing distance also matters: a larger screen viewed from the same distance fills more of the field of view, and a screen that is too high is more noticeable. The calculator does not decide the distance; it only gives the geometry for the height you choose.

Common mistakes

  • Mounting the TV so the centre is well above seated eye level.
  • Measuring eye height while standing instead of sitting in the usual seat.
  • Using the screen width as the diagonal, or mixing inches and centimetres.
  • Forgetting the mount bracket and cable clearance behind the TV.
  • Choosing a height that fits the wall but not the furniture below.
  • Ignoring the viewing distance and the room's seating layout.

Assumptions and limits

  • The screen diagonal is measured corner to corner in centimetres.
  • The aspect ratio is the screen's width-to-height ratio.
  • The seated eye height is measured from the floor in the normal viewing position.
  • The TV is mounted vertically, without a significant tilt.
  • The mount bracket adds negligible height or is accounted for separately.
  • The calculation is geometric and does not include viewing-distance recommendations.

Frequently asked questions

How high should a TV be mounted?

A common starting point is to put the centre of the screen at seated eye level, roughly 100-110 cm from the floor for many adults. The exact height depends on the seat, the screen size, and whether you recline. The calculator gives the centre and edges for your eye height.

Should the TV be higher if it is above a fireplace?

Often it has to be, but higher is not better for comfort. A tilt mount can angle the screen down, and a lower mantel or a different wall may be preferable. If the centre ends up well above eye level, consider an alternative location.

How do I convert inches to centimetres for the diagonal?

Multiply inches by 2.54. A 55-inch TV is about 140 cm diagonally. The calculator accepts centimetres, so convert first to avoid mixing units. The screen height and width are then derived from the diagonal and aspect ratio.

Does the aspect ratio matter for height?

Yes. For the same diagonal, a 21:9 screen is shorter and wider than a 16:9 screen. In the ultrawide example the height is only 39.4 cm, so the bottom and top edges sit closer to the centre. The aspect ratio changes the wall coverage even when the diagonal is unchanged.

How much clearance do I need above and below the TV?

Leave enough room for the mount, cables, and ventilation, and check that the bottom edge clears any furniture. The top edge should not crowd a shelf or ceiling. The calculator gives the edges; add the bracket and cable space separately.

Can I use this for a projector screen?

The geometry is the same for a fixed screen, but projector screens are often mounted higher and the viewing angle is set by the projector. Use the screen height and width as a starting point, then follow the projector manufacturer's throw and offset guidance.

Sources

This is an educational geometry tool, not an installation instruction. Wall construction, stud location, mount rating, and cable routing must be checked before mounting a TV. Follow the manufacturer's instructions and use a qualified installer if unsure.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.