What this calculator does
A projector's throw ratio is the number that connects the screen size to the distance from the lens. It is written as distance ÷ screen width, so a 1.5:1 projector needs 1.5 metres of distance for every metre of image width. That single number determines whether a projector will fill the wall from the back of the room, or whether the room is too short for the screen you want. This calculator works in both directions: enter a screen size to find the distance, or enter the room distance to find the largest screen that fits. It also converts the diagonal to width and height for the chosen aspect ratio, so you can check the image against the wall and the seating position. The result assumes the lens is at the screen centre and the projector has enough zoom and lens shift; check the projector's manual for the actual range.
How to use it
- Find the projector's throw ratio in the manual; zoom lenses list a range.
- Choose the aspect ratio of the content you will watch most.
- Enter the screen diagonal if you are choosing a screen.
- Switch to room mode if the distance is fixed and you want the largest screen.
- Enter the available distance from the lens to the screen, not the room length.
- Leave space behind the projector for cables, ventilation, and the body of the unit.
How it works
Example calculations
Example 1: A 250 cm 16:9 screen at 1.5:1
The screen is 217.9 cm wide and 122.6 cm high, with an image area of 2.67 m². At a 1.50:1 throw ratio the lens must be 3.27 m from the screen. If the room is shorter, you need a lower throw ratio or a smaller screen.
Example 2: A 4 m room with a 1.2:1 projector
With 4.0 m of distance and a 1.2:1 throw ratio, the widest image is 333 cm, which gives a 382 cm diagonal at 16:9 and an area of 6.25 m². The height is 188 cm, so check that the wall and the ceiling height can take it.
Example 3: A 300 cm 21:9 screen with an ultra-short-throw lens
A 300 cm 21:9 screen is 276 cm wide and 118 cm high. At a 0.9:1 throw ratio the distance is only 2.48 m, which is typical of an ultra-short-throw projector placed close to the wall. The image area is 3.26 m².
What the result means
The throw distance is measured from the front of the lens to the screen, not from the back of the projector or the wall. A projector body, cables, and ventilation can add 20–50 cm behind the lens, so a room that is exactly the calculated distance will be too short. Zoom lenses cover a range of throw ratios: the manual may say 1.2–1.5:1, which means the same screen can be filled from a range of distances. Lens shift moves the image without moving the projector, but it has limits. The calculator assumes the projector is centred on the screen; if it is offset, the usable image may be smaller. Check the manual for the actual throw range and lens-shift specification.
Common mistakes
- Measuring the room length instead of the lens-to-screen distance.
- Forgetting the depth of the projector and the space needed for cables and ventilation.
- Using the maximum throw ratio when the zoom range would allow a closer position.
- Assuming a 16:9 projector can fill a 21:9 screen without cropping or letterboxing.
- Ignoring lens-shift limits when the projector cannot be centred.
- Buying a screen before checking the projector's actual throw range.
Assumptions and limits
- The projector is centred horizontally and vertically on the screen.
- The throw ratio is the actual lens-to-screen ratio, not a marketing approximation.
- The screen diagonal and aspect ratio describe the visible image.
- The room distance is measured from the lens position, not the back wall.
- Zoom and lens shift are within the projector's specified range.
- The screen is flat and perpendicular to the projector's lens axis.
Frequently asked questions
What is a projector throw ratio?
It is the distance from the lens to the screen divided by the screen width. A 1.5:1 ratio means 1.5 metres of distance for every metre of image width. Lower ratios are short-throw; higher ratios need a longer room.
How do I find the throw ratio for my projector?
Check the manual or the manufacturer's specification sheet. It may be listed as a single number or a range for a zoom lens. If only the distance and screen size are given, divide the distance by the screen width.
Can I use a projector closer than the minimum throw distance?
No, unless the projector has a short-throw lens and the manufacturer specifies that distance. Going closer than the minimum can prevent focus or fill the screen. Check the manual's throw range before mounting.
How do I measure the screen size?
Screen size is usually the diagonal of the visible image, not the frame. Measure width and height if you can, and use the aspect ratio to check that the diagonal matches. The calculator converts between all three.
Does the aspect ratio change the throw distance?
Yes, because the throw ratio is based on width. For the same diagonal, a wider aspect ratio has a larger width, so the throw distance is longer. The calculator uses the aspect ratio to convert the diagonal to width.
What about ceiling height and seating distance?
The calculator does not model room geometry beyond the screen. Check that the screen height fits between the floor and ceiling, and that the seating distance gives a comfortable viewing angle. A common guide is a seating distance of about 1.5–2.5 times the screen height.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.