Skip to content

Conversion

Density Converter

Enter a density and choose the from and to units. The calculator converts through kilograms per cubic meter and returns the converted value plus a quick reference in kg/m³, g/cm³, lb/ft³, and lb/in³. Density depends on temperature and pressure, so use the conditions that match your measurement.

Updated 2026-11-12 Editorial estimate Calccc Editorial Team Free · No sign-up

Loading calculator…

What this calculator does

Density is mass per volume. The SI unit is kilograms per cubic meter, but labs often use grams per cubic centimeter, and US construction and shipping often use pounds per cubic foot. Because 1 g/cm³ equals 1,000 kg/m³, a water density near 1 g/cm³ is about 1,000 kg/m³. Converting is a chain: convert the input to kg/m³, then divide by the target unit factor.

How to use it

  1. Enter the density value.
  2. Choose the unit you are converting from.
  3. Choose the unit you want.
  4. Read the converted value and the reference values.
  5. Check temperature and pressure if the number is for a gas.

How it works

kg/m³ = value × factor(from). result = kg/m³ / factor(to). Factors: kg/m³ = 1, g/cm³ = 1,000, g/L = 1, lb/ft³ = 16.018463, lb/in³ = 27,679.905. The chain means every conversion is exact up to the published factor and displayed rounding.

Example calculations

Example 1: 1 g/cm³ to kg/m³

The result is 1,000 kg/m³, equivalent to about 62.43 lb/ft³ and 0.0361 lb/in³.

Example 2: 1.225 kg/m³ to g/cm³

The result is 0.001225 g/cm³, close to the density of air at sea level and 15 °C.

Example 3: 7.85 g/cm³ to lb/ft³

The result is about 490.06 lb/ft³, a typical density for steel.

What the result means

A density conversion does not change the substance; it only changes the unit. For gases, the number is only meaningful with a temperature and pressure because gases expand and contract. For powders and granular materials, bulk density differs from particle density. For liquids, temperature matters but less than for gases. Keep the original measurement and the conditions with the converted value.

Common mistakes

  • Using g/cm³ and kg/m³ as if they were the same scale.
  • Converting a gas density without temperature and pressure.
  • Confusing bulk density with particle density.
  • Rounding the factor to 16 instead of 16.018463 for precise work.
  • Mixing lb/ft³ with lb/in³.

Assumptions and limits

  • The density is measured at the stated temperature and pressure.
  • The conversion factors are exact to the displayed decimals.
  • The substance is uniform.
  • Bulk and particle density are not distinguished.
  • Displayed results are rounded.

Frequently asked questions

How many kg/m³ are in 1 g/cm³?

Exactly 1,000. A density of 1 g/cm³ is 1,000 kg/m³.

How do I convert kg/m³ to lb/ft³?

Divide by 16.018463. For example, 1,000 kg/m³ is about 62.43 lb/ft³.

Why does gas density need temperature?

Gas volume changes with temperature and pressure, so density changes too. Always state the conditions.

What is the density of water?

About 1 g/cm³ or 1,000 kg/m³ at 4 °C. It is slightly lower at room temperature.

What is bulk density?

Bulk density includes the space between particles. It is lower than the density of the solid material.

Can I convert specific gravity?

Specific gravity is a ratio to water. Multiply it by 1,000 to get kg/m³, or by 1 to get g/cm³.

Sources

This calculator is an educational estimate and is not financial, medical, legal, or professional advice. Confirm important decisions with a qualified professional and the latest official sources.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Go deeper

Guides that explain the math

Density Conversion: kg/m³, g/cm³, and lb/ft³
Conversion

Density Conversion: kg/m³, g/cm³, and lb/ft³

Density is mass per volume, and the metric and imperial units are linked by exact factors. Learn the conversions, worked examples, and why gases need temperature and pressure.

9 min read

Calccc Editorial Team · Updated 2026-11-12

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.