Skip to content

Doorway Fit Calculator

Enter the item's length, width, and height, and the door opening's width and height. The calculator checks all three faces in both orientations. A 180 × 75 × 80 cm item passes through an 80 × 200 cm door with 5 cm to spare on the tightest face.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
cm
cm
cm
cm
cm
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

Furniture that fits in the room does not always fit through the door. A sofa can be too wide, too tall, or too deep, and the difference between a smooth move and a stuck item is often a few centimetres. This calculator treats the item as a rectangular box and checks each of its three faces against the door opening, in both orientations. If any face fits within the door width and height, the item can pass through in that orientation, and the calculator reports the clearance at the tightest point. It also shows the closest face if nothing fits. Real moves involve door thickness, handles, hinges, stairs, and turning space, so measure the narrowest point and remove the door if you can.

How to use it

  1. Measure the item's length, width, and height at its widest points.
  2. Measure the door opening's width and height, not the door slab.
  3. Remove the door and any handles if possible, then measure again.
  4. Enter the dimensions and check whether the item fits.
  5. Read the best face and the clearance at the tightest point.
  6. Allow extra space for packaging, corners, and the turn into the room.

How it works

For each face, try both orientations: a ≤ door width and b ≤ door height, or a ≤ door height and b ≤ door width. If either holds, the face fits. Clearance = min(door width - a, door height - b). The calculator checks the length × width, length × height, and width × height faces and reports the best fit.

Example calculations

Example 1: A tight but workable fit

An item 180 cm long, 75 cm wide, and 80 cm high passes through an 80 × 200 cm door on its length × width face, with the 75 cm side across the door and the 180 cm side along the height. The clearance is 5 cm at the tightest point. That is enough to plan for, but not much room for packaging or a bad angle.

Example 2: Exactly at the limit

An item 220 × 95 × 90 cm through a 90 × 210 cm door fits on its width × height face: 90 cm across the door and 95 cm up, leaving 0 cm of clearance at the width. A fit with zero margin is not a comfortable move; remove the door, protect the frame, and have help to keep the item straight.

Example 3: Does not fit

An item 230 × 100 × 105 cm does not fit through an 80 × 200 cm door. The closest face is width × height at 100 × 105 cm, which is 20 cm too wide. No rotation of that face helps. The options are a wider opening, removing a window or door frame, or choosing a different item.

What the result means

The result is a geometric check, not a moving guarantee. The calculator assumes the item is a rigid rectangular box and that you can rotate it freely in the plane of the doorway. Real furniture has arms, legs, handles, and a shape that may not match a box, and the approach to the door may force a particular angle. A positive result with a small clearance is a warning, not a green light. Measure the actual narrowest point, account for door thickness and the turn into the room, and use blankets or cardboard to protect both the item and the frame.

Common mistakes

  • Measuring the door slab instead of the clear opening.
  • Forgetting to remove the door and handles before measuring.
  • Using the item's packaged dimensions for an unpackaged move, or vice versa.
  • Ignoring the turn from the hallway into the room.
  • Assuming a zero-clearance fit will be easy in practice.
  • Treating a box-based result as a guarantee for an irregular sofa or table.

Assumptions and limits

  • The item is a rigid rectangular box.
  • The door opening is a rectangle with the entered width and height.
  • The item can be rotated freely in the plane of the doorway.
  • The door thickness, frame, and hallway approach are not modelled.
  • The item has no protruding parts beyond the entered dimensions.
  • Packaging and protection materials are not included.

Frequently asked questions

How do I know if furniture will fit through a door?

Compare each face of the item with the door opening in both orientations. If any face fits within the width and height, the item can pass through in that orientation. The calculator does this check and reports the clearance.

Should I measure the door with or without the door removed?

Measure the clear opening with the door removed and handles off. That is the space the item actually has to pass through. The door slab itself is not the limiting dimension once it is open.

What if the fit is exactly zero?

A zero-clearance fit is mathematically possible but difficult in practice. Any packaging, an uneven angle, or a protruding part can block it. Remove the door, protect the edges, and have help to keep the item aligned.

Can a sofa fit diagonally?

Sometimes, but this calculator only checks the rectangular faces. A sofa's shape, arms, and legs can allow or prevent angles that a box model does not capture. For an expensive or irregular item, measure the actual piece and consider a professional mover.

What if the item does not fit?

Options include removing the door and frame, using a wider opening, disassembling the item, or choosing a different item. Do not force it through a narrow opening, because damage to the item, the door, or the wall can be costly.

Does the door height include the frame?

Use the clear height from the floor to the top of the opening, not the rough framing. If there is a threshold or carpet, measure from the surface the item will slide on.

Sources

This calculator is an educational planning tool, not financial, legal, insurance, medical, or professional advice. Results depend on the inputs and on rules that vary by place and provider. Confirm important decisions with a qualified professional and the relevant documents.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.