Skip to content

Propane Tank Duration Calculator

Enter the propane weight, appliance input, efficiency, and daily use. The calculator converts the fuel to energy, applies the efficiency, and divides by the appliance's draw. An 11.0 kg cylinder running a 3.5 kW appliance at 1% efficiency lasts about 36.2 hours.

Updated 2026-11-19 Editorial estimate Calccc Editorial Team Free · No sign-up
kg

A typical exchange cylinder holds about 11 kg of propane.

kW
%

Radiant heaters are often 80–95%; use the manufacturer's figure if you have it.

h
Scenarios A/BSave two input sets and compare the results. Stored only in this browser.
AEmpty
BEmpty

Your inputs stay in this browser. No account, no uploads.

Professional worksheet

Detailed schedule & assumptions

Inputs used, method, sensitivity, and any year-by-year table. The summary above stays compact; the audit lives here.

Professional worksheet

Inputs, scope, and sensitivity

Inputs used

Method and scope

Result audit

MetricValue

What this calculator does

A propane cylinder is sold by weight, but an appliance is rated by heat input, so the two numbers are not directly comparable. The missing step is the energy content of propane and the efficiency of the appliance. This calculator converts the cylinder weight to kilowatt-hours, applies the efficiency to get useful heat, and divides by the appliance's input to estimate burn time. It then converts that to days at your typical daily use. The result is a planning estimate: a full cylinder in mild weather may deliver close to the calculated time, while a cold day, a nearly empty cylinder, or a dirty burner can shorten it. Use the result to choose a cylinder size, plan a refill, or compare the running cost of two appliances.

How to use it

  1. Enter the weight of propane in the cylinder, not the total weight of the steel.
  2. Enter the appliance's rated heat input in kilowatts.
  3. Use the manufacturer's efficiency if available; otherwise use a realistic estimate.
  4. Enter how many hours a day the appliance runs at full output.
  5. Read the burn time in hours and the days at your usage.
  6. Reduce the estimate for cold weather, part-load operation, and cylinder heel.

How it works

Propane energy ≈ 46.1 MJ/kg, or 12.81 kWh/kg. Useful heat = propane weight × 12.81 × efficiency. Burn time = useful heat ÷ appliance input. Days = burn time ÷ hours per day. For 11.0 kg, 3.5 kW, and 1% efficiency, the burn time is 36.2 hours.

Example calculations

Example 1: An 11 kg cylinder and a 3.5 kW heater

The cylinder holds 140.9 kWh of propane energy. At 1% efficiency, 126.8 kWh reaches the room, which lasts 36.2 hours at 3.5 kW. At 2.0 hours a day, that is about 18.1 days.

Example 2: A 5 kg cylinder and a 2 kW appliance

A smaller cylinder with a lower-power appliance gives 25.6 hours at 1% efficiency, or 17.1 days at 1.5 hours a day. The lower power partly offsets the smaller fuel load, so the burn time is not proportional to the cylinder size alone.

Example 3: A 47 kg cylinder and a 9 kW appliance

A large cylinder feeding a 9.0 kW appliance at 1% efficiency lasts 63.5 hours, or 15.9 days at 4.0 hours a day. The large cylinder has more energy, but the higher appliance draw uses it faster.

What the result means

Burn time is proportional to the fuel weight and efficiency, and inversely proportional to the appliance input and daily use. The energy content of propane is fairly stable, but the efficiency is not: a radiant heater, a condensing boiler, and an open burner all convert fuel to useful heat differently. The daily-use figure is the other big lever. An appliance rated at 3.5 kW may cycle on and off, so the actual average input can be lower than the rating; using the full rating gives a conservative estimate. In cold weather, the cylinder pressure drops and the appliance may not receive full input, which shortens the useful burn time. The estimate also assumes the cylinder is full and that no fuel is left as a heel.

Common mistakes

  • Using the total weight of the cylinder instead of the propane weight.
  • Treating the appliance's heat output as its fuel input.
  • Ignoring efficiency and assuming all the propane energy reaches the room.
  • Using the rated input when the appliance cycles on and off.
  • Assuming full performance in freezing weather or with a nearly empty cylinder.
  • Forgetting that the last part of the cylinder may not vaporise at the required rate.

Assumptions and limits

  • Propane has an energy content of about 46.1 MJ/kg, or 12.81 kWh/kg.
  • The cylinder contains the stated weight of propane and is full at the start.
  • The appliance runs at its rated input whenever it is on.
  • The efficiency is constant across the whole burn.
  • The cylinder and regulator can supply the appliance at the required rate.
  • Cold-weather derating, cylinder heel, and part-load operation are not modelled unless reflected in the inputs.

Frequently asked questions

How long does an 11 kg propane cylinder last?

It depends on the appliance. At 3.5 kW and 1% efficiency, an 11 kg cylinder lasts about 36.2 hours. At 2.0 hours a day, that is about 18.1 days. A lower-power appliance or less daily use extends the time.

How many kWh are in a kg of propane?

About 12.8 kWh per kg, based on 46.1 MJ/kg. The exact figure varies slightly with the propane/butane mix, but the difference is small for planning.

Does the efficiency really matter?

Yes. A 90% efficient appliance delivers 90% of the propane's energy as useful heat; a 70% efficient appliance delivers only 70%. The difference changes the burn time by more than a quarter, so use the manufacturer's figure where possible.

Why does my cylinder run out faster in winter?

Cold temperatures reduce the vapour pressure of propane, so the cylinder may not supply the appliance at its rated rate, and the appliance may run longer to reach the same temperature. The last part of the cylinder is also harder to vaporise. The calculator assumes full performance.

Can I use this for a propane grill?

Yes, if you know the grill's input in kW and its approximate efficiency. Grills are often rated in BTU per hour; divide by 3,412 to get kW. The estimate is rough because grills cycle and lose heat to the open air.

Is it safe to store propane indoors?

No. Propane cylinders should be stored outdoors, upright, and away from heat and ignition sources, following local regulations. This calculator is about duration, not safe handling or installation.

Sources

This is an educational duration estimate, not a safety or installation instruction. Propane appliances and cylinders must be used and stored according to the manufacturer's instructions and local codes. Never use a propane appliance indoors without proper ventilation.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Calccc Editorial Team · Updated 2026-11-19

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.