Skip to content

Everyday

Tile Calculator

Enter the room length and width, the tile length and width in inches, and a waste percentage. The calculator returns the room area, the area of one tile, and the number of tiles to buy after waste. It assumes a rectangular room and a simple layout estimate. Boxes, grout, and underlayment are not included.

Updated 2026-11-12 Editorial estimate Calccc Editorial Team Free · No sign-up

Loading calculator…

What this calculator does

This tile calculator turns room dimensions and tile size into a tile count. It converts tile inches to feet, divides the room area by the area of one tile, and adds a waste allowance for cuts, breakage, and future repairs. It works for floors, walls, and backsplashes, as long as the area is roughly rectangular. The result is a shopping estimate rather than an order. Patterns, borders, and diagonal layouts need more waste, so the percentage you choose matters as much as the measurements.

How to use it

  1. Measure the room length and width in feet.
  2. Enter the tile length and width in inches.
  3. Choose a waste percentage for cuts and breakage.
  4. Review the room area, tile area, and tile count.
  5. Round the count up to full boxes when you order.

How it works

Room area = length x width. Tile area = (tile length / 12) x (tile width / 12). Tiles needed = room area / tile area x (1 + waste / 100), rounded up to the next whole tile. If the room has more than one rectangle, calculate each area separately and add the results before applying waste. For a 10-by-12 room and 12-by-12 tiles, the room is 120 square feet and each tile is 1 square foot. With 10% waste, 120 x 1.10 = 132 tiles.

Example calculations

Example 1: 10 x 12 room, 12 x 12 tile, 10% waste

The room is 120 square feet and each tile covers 1 square foot. With 10% waste, the count is 132 tiles, so buy 132.

Example 2: 8 x 10 room, 6 x 24 tile, 15% waste

The room is 80 square feet. A 6-by-24-inch tile covers 1 square foot, so 80 tiles plus 15% waste is 92 tiles. The 12 extra tiles cover cuts, breakage, and a few spares.

Example 3: 12 x 12 room, 12 x 12 tile, 0% waste

The room is 144 square feet and each tile covers 1 square foot. With no waste allowance, the calculator returns 144 tiles. Ordering a few extra is still smart.

What the result means

A straight grid layout in a rectangular room is the simplest case. Diagonal layouts, herringbone, and patterns with many cuts usually need a higher waste percentage, and rooms with alcoves, angles, or multiple transitions create more offcuts. Large-format tiles can also produce more waste because a single cut may consume most of a tile. Grout lines do not change the area math much, but the tile's nominal size may differ slightly from its actual size. For a complicated room, a scale drawing can show where cuts fall and whether the waste allowance is realistic. Buy all tiles in one order when possible so dye lots match, and keep a few spares for repairs.

Common mistakes

  • Mixing inches and feet in the same measurement.
  • Using the room area without adding waste for cuts.
  • Assuming a patterned layout uses the same waste as a straight grid.
  • Forgetting that tile is sold by the box, not by the single tile.
  • Ordering from different dye lots later when a tile breaks.

Assumptions and limits

  • The room is rectangular and the tile covers the full area.
  • Tile dimensions are the nominal size printed on the package.
  • Waste covers cuts, breakage, and a small number of spares.
  • Grout lines and expansion gaps are ignored in the area math.
  • All tiles in the order are usable and from the same dye lot.

Frequently asked questions

What waste percentage should I use?

A simple straight layout often uses about 10%. Diagonal, patterned, or irregular rooms usually need 15% or more. When in doubt, choose the higher figure for expensive or special-order tile.

Why does the calculator round up?

You cannot buy a fraction of a tile, and a partial tile may be unusable after cuts. Rounding up keeps the estimate practical.

Should I include grout lines?

The area math ignores them. Grout lines are narrow and do not change the count much, but they do affect layout and the actual coverage of each tile.

How do I convert the tile count to boxes?

Divide the tile count by the number of tiles per box, then round up. This calculator leaves boxes out because packaging varies by product.

Does this work for wall tile?

Yes, if the wall area is rectangular. Measure the tiled area only, and add extra waste for outlets, niches, and corners.

What about a backsplash with cabinets and outlets?

Measure the actual tiled area and use a higher waste percentage. Small spaces with many cuts can waste more than a large open floor.

Sources

This calculator is a planning estimate only. Actual tile counts depend on room shape, layout, cuts, grout width, and the condition of the surface. Confirm the tile size and coverage with the product listing or a qualified installer before ordering.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Go deeper

Guides that explain the math

Tile Calculator: Square Footage, Waste, and Box Count
Everyday

Tile Calculator: Square Footage, Waste, and Box Count

Measure the area, add the right waste factor, and convert square footage into full boxes without running short.

5 min read

Calccc Editorial Team · Updated 2026-11-12

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.