What this calculator does
Frequency measures how often a repeating event occurs, usually in cycles per second. Hertz is the base unit; kilohertz, megahertz, and gigahertz are scaled versions used for audio, radio, processors, and other signals. This converter moves a value between those four units in one step, showing all four outputs so you can check the magnitude. It is a unit change only and does not measure a real signal.
How to use it
- Enter the frequency as a number; zero and decimals are allowed.
- Select the unit you are converting from.
- Read the same frequency in hertz, kilohertz, megahertz, and gigahertz.
- Check the scale by comparing the prefixes and the number of zeros.
How it works
Example calculations
Example 1: 1,000 Hz
1,000 Hz equals 1 kHz, 0.001 MHz, and 0.000001 GHz. The value is one thousand cycles per second, which is a common audio frequency.
Example 2: 2.4 GHz
2.4 GHz equals 2,400 MHz, 2,400,000 kHz, and 2,400,000,000 Hz. The prefix change does not alter the frequency; it only changes the number used to express it.
Example 3: 500 kHz
500 kHz equals 500,000 Hz, 0.5 MHz, and 0.0005 GHz. A value can look larger in one unit and smaller in another because the prefixes differ by factors of 1,000.
What the result means
The prefix tells you the scale: kilo means thousand, mega means million, and giga means billion. A frequency of 2.4 GHz is 2.4 billion cycles per second, not 2.4 million. When comparing specs, convert both to the same unit; a 900 MHz signal is lower than a 2.4 GHz signal, even though 900 looks larger than 2.4. Frequency is not the same as wavelength, bandwidth, or signal strength, and a unit conversion cannot tell you whether a device will work in a given country or application. Very large or very small values are easier to read in scientific notation. Rounding is for display only.
Common mistakes
- Treating megahertz and gigahertz as if they differed by 100 rather than 1,000.
- Multiplying instead of dividing when converting from hertz to a larger unit.
- Confusing frequency with wavelength or bandwidth.
- Dropping zeros when writing very large values such as 2.4 billion hertz.
- Assuming that the same frequency means the same signal range or performance.
Assumptions and limits
- The input is a finite, non-negative number.
- The prefixes are decimal SI prefixes, so each step is a factor of 1,000.
- The value is a frequency, not a period, wavelength, or data rate.
- No modulation, bandwidth, or signal-strength conversion is applied.
- Results are rounded only for display.
Frequently asked questions
How many hertz are in a kilohertz?
There are 1,000 hertz in one kilohertz. To go from kilohertz to hertz, multiply by 1,000; to go the other way, divide by 1,000.
How many megahertz are in a gigahertz?
There are 1,000 megahertz in one gigahertz. A 2.4 GHz value is therefore the same as 2,400 MHz.
Is frequency the same as bandwidth?
No. Frequency describes the center or rate of a repeating signal, while bandwidth describes the range of frequencies a channel or signal occupies. They are related but not interchangeable.
Can I enter a decimal value?
Yes. Decimal values such as 0.5 MHz or 2.4 GHz are valid. The converter keeps the same frequency and changes only the unit.
Why is 2.4 GHz also written as 2,400 MHz?
One gigahertz equals 1,000 megahertz, so multiplying 2.4 by 1,000 gives 2,400 MHz. The physical frequency does not change.
What is one hertz?
One hertz is one cycle per second. It is the SI unit of frequency and is named after Heinrich Hertz.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
