Skip to content

Conversion

Pressure Converter

Enter a pressure value and choose the unit you are starting from. The converter shows the same pressure in psi, bar, kPa, and atm at once. It uses standard conversion factors applied through the pascal, the SI unit of pressure. Results are rounded for display; for engineering or safety-critical work, verify with a calibrated instrument.

Updated 2026-11-12 Editorial estimate Calccc Editorial Team Free · No sign-up

Loading calculator…

What this calculator does

Pressure is force spread over an area, and different industries measure it in different units. Tire gauges use psi, weather reports use hectopascals, scuba and laboratory work use atm or bar, and equipment datasheets often mix all of them. Because every unit is a fixed multiple of the pascal, converting between them is a matter of multiplying and dividing by constants. This page converts among psi, bar, kPa, and atm and shows all four at once.

How to use it

  1. Enter the pressure value you want to convert.
  2. Select the unit that value is stated in.
  3. Read the same pressure in psi, bar, kPa, and atm.
  4. Use atm for science and psi for US equipment ratings.
  5. Round to the precision your source value supports.

How it works

All conversions pass through the pascal. 1 psi = 6,894.757 Pa, 1 bar = 100,000 Pa, 1 kPa = 1,000 Pa, and 1 atm = 101,325 Pa. Multiply the input by its pascal factor, then divide by the target unit's factor. In round numbers, 1 atm = 14.696 psi = 1.01325 bar = 101.325 kPa. Bar and atm are close but not identical, differing by about 1.3%.

Example calculations

Example 1: 30 psi

30 psi is 30 x 6,894.757 = 206,842.7 Pa. That is 2.068 bar, 206.84 kPa, and 2.041 atm.

Example 2: 2 bar

2 bar is 200,000 Pa, or 200 kPa. It equals 29.01 psi and 1.974 atm. Two bar is a common rating for water pipes and small pressure vessels.

Example 3: 101.325 kPa

101.325 kPa is exactly 1 atm, the standard atmospheric pressure at sea level. In other units that is 1.01325 bar and 14.696 psi.

What the result means

The pascal is small, so practical pressure is usually quoted in kilopascals, bar, or psi. Bar is 100,000 pascals and is common in European engineering; atm is 101,325 pascals and refers to average sea-level air pressure; psi dominates US tire, plumbing, and compressor ratings. Weather reports often use hectopascals, which are numerically identical to millibars, so 1,013 hPa is the same as 1,013 mbar. The most common source of confusion is gauge versus absolute pressure. A tire gauge reads pressure above ambient, so a 32 psi reading is about 46.7 psi absolute at sea level. Formulas in physics and chemistry usually expect absolute pressure. Check which convention a specification uses before converting.

Common mistakes

  • Treating a gauge reading as absolute pressure, or the reverse.
  • Using 14.5 psi per atm when the exact factor is 14.696.
  • Assuming bar and atm are interchangeable when 1.3% matters.
  • Confusing kPa with hPa and losing a factor of ten.

Assumptions and limits

  • 1 atm = 101,325 Pa exactly, by definition.
  • 1 bar = 100,000 Pa exactly.
  • 1 psi = 6,894.757 Pa, using standard gravity.
  • Inputs are gauge or absolute pressures, stated consistently.
  • Rounding is applied for display only, not during conversion.

Frequently asked questions

What is the difference between gauge and absolute pressure?

Gauge pressure is measured relative to the surrounding atmosphere, so a tire gauge reading 32 psi means 32 psi above ambient. Absolute pressure adds atmospheric pressure, roughly 14.7 psi at sea level, giving about 46.7 psi.

Is 1 bar the same as 1 atm?

No, though they are close. 1 bar is 100,000 Pa and 1 atm is 101,325 Pa, so 1 atm is about 1.01325 bar.

Why does the US use psi?

Psi is pounds-force per square inch, which fits the US customary system. It remains standard for tires, hydraulics, and compressed air in the United States, while most other countries use bar or kPa.

How do kPa and hPa relate?

One kilopascal is 1,000 pascals and one hectopascal is 100 pascals, so 1 kPa equals 10 hPa. Weather services report around 1,013 hPa.

Can pressure be negative?

Absolute pressure cannot be negative. Gauge pressure can read negative when it measures a vacuum relative to ambient, as in suction lines. The conversion math still works, but interpret the sign carefully.

How precise are these conversions?

The factors are exact definitions or standards. The limiting factor is usually the precision of your source reading, so do not report more digits than the input supports.

Sources

This converter is for general information and education. It applies standard factors and rounds results for display. For engineering, medical gas, aviation, or safety-critical work, verify with an authoritative reference or a calibrated instrument.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Go deeper

Guides that explain the math

Pressure Conversion: PSI, Bar, kPa, and Atmospheres
Conversion

Pressure Conversion: PSI, Bar, kPa, and Atmospheres

Convert pressure between psi, bar, kPa, and atm with the exact pascal factors, worked examples, gauge-versus-absolute traps, and rounding rules.

8 min read

Calccc Editorial Team · Updated 2026-11-12

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.