What this calculator does
A cord of firewood is a measure of stacked volume, not of solid wood, and the gaps between logs can be a third or more of the pile. That is why two stacks of the same size can contain different amounts of burnable wood. This calculator converts a stack's dimensions into stacked volume, applies a solid-wood share, and estimates the mass from the wood density. It then estimates stored heat energy using a typical energy content for dry wood and the efficiency of the stove. The result is a planning estimate for buying, stacking, and budgeting firewood. Moisture content, wood species, stove type, and how you run the stove all change the real output, so treat the numbers as a range rather than a guarantee.
How to use it
- Measure the length of the logs and the height and depth of the stack.
- Estimate the solid-wood share, or use the default 65% for split firewood.
- Enter the wood density for the species you are burning.
- Enter the stove efficiency from its manual or a realistic estimate.
- Enter your daily heating demand in kWh.
- Use the days-of-heating figure to compare the stack with your needs.
How it works
Example calculations
Example 1: A 0.4 × 1.2 × 0.8 m stack
The stack volume is 0.384 m³. At 65% solid share, the solid wood volume is 0.2496 m³, and at 700 kg/m³ the mass is about 175 kg. At 4.5 kWh/kg and 70% stove efficiency, the stored heat is about 550 kWh, or roughly 13.8 days at 40 kWh/day. The stack is about 0.106 cords.
Example 2: A larger 0.5 × 1.5 × 1 m stack
The stack volume is 0.75 m³, with 0.4875 m³ of solid wood and about 341 kg of wood. The stored heat is about 1,075 kWh, or roughly 26.9 days at 40 kWh/day. The stack is about 0.207 cords. Doubling the volume roughly doubles the heat, but the burn rate and weather still control how long it lasts.
Example 3: A small stack of denser wood
A 0.33 × 1 × 0.5 m stack is 0.165 m³, with 0.107 m³ of solid wood. At 750 kg/m³ the mass is about 80 kg. At 60% stove efficiency and 35 kWh/day, the stored heat is about 217 kWh, or roughly 6.2 days. The lower efficiency and higher daily demand reduce the useful heat even though the wood is denser.
What the result means
The stored heat figure is the useful heat delivered by the stove, not the raw chemical energy in the wood. It depends heavily on moisture: wet wood uses energy to evaporate water and produces less useful heat, and it can also create more creosote. The solid-wood share is the biggest source of uncertainty in the volume conversion; a loosely thrown pile has more air than a tightly stacked one. The days-of-heating figure is a budgeting aid, not a promise, because weather, house insulation, and stove operation change the demand. Use dry, seasoned wood and store it under cover with airflow.
Common mistakes
- Treating a stacked cubic metre as a solid cubic metre of wood.
- Using the density of green wood as if it were seasoned wood.
- Ignoring stove efficiency and comparing raw wood energy with delivered heat.
- Burning wet wood, which wastes energy and increases creosote.
- Estimating the stack size from memory rather than measuring it.
- Assuming the days-of-heating figure is fixed regardless of weather.
Assumptions and limits
- The stack is rectangular and evenly packed.
- The solid-wood share is constant through the stack.
- The wood is seasoned and the density is representative of the species.
- The energy content is about 4.5 kWh per kg of dry wood.
- Stove efficiency is constant and the daily demand is an average.
- Heat losses from storage, chimney, and building are not modelled separately.
Frequently asked questions
How much is a cord of firewood?
A cord is 128 cubic feet, or about 3.62456 cubic metres of stacked wood. Because of the air gaps, a cord contains less solid wood than its stacked volume suggests.
How many kWh are in a stack of firewood?
It depends on the mass, moisture, and stove efficiency. The default 0.384 m³ stack holds about 175 kg of wood and delivers roughly 550 kWh at 70% efficiency. Wet wood delivers less.
What is the solid-wood share?
It is the share of the stack's volume that is actual wood rather than air gaps. Split firewood stacked by hand is often around 60% to 70% solid.
Does denser wood always mean more heat?
For the same solid volume, denser wood contains more mass and therefore more energy. But moisture, stove efficiency, and how you burn it also matter. Very dense wood can be harder to ignite.
How long should firewood season?
It depends on the species, split size, and climate. Many hardwoods need six to twelve months or more. Seasoned wood is lighter, has cracks at the ends, and burns more cleanly.
Why does wet wood produce less heat?
Water in the wood must be evaporated before the wood can burn, which uses energy. Wet wood also burns cooler and can create more smoke and creosote, so the useful heat is lower.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.