Skip to content

Everyday

Mulch Calculator

Enter the bed length and width in feet and the mulch depth in inches. The calculator returns the area, cubic feet, cubic yards, and the number of 2-cubic-foot bags, with bags rounded up. Bags are sold by volume, so check the label if your bag holds a different amount.

Updated 2026-11-12 Editorial estimate Calccc Editorial Team Free · No sign-up

Loading calculator…

What this calculator does

Mulch is sold by the cubic foot or cubic yard, but beds are measured in square feet and depth in inches, so a conversion is needed. This calculator multiplies area by depth in feet to get cubic feet, divides by 27 for cubic yards, and divides by 2 for the number of 2-cubic-foot bags. It helps you compare bagged mulch with bulk delivery. Bulk is usually cheaper for large beds, while bags are easier to carry and store.

How to use it

  1. Measure the bed length and width in feet.
  2. Enter the depth of mulch you plan to spread in inches.
  3. Review the area, cubic feet, cubic yards, and bag count.
  4. Adjust the depth to compare a thin refresh coat with a full application.

How it works

Volume (ft3) = length (ft) x width (ft) x depth (in) / 12. Cubic yards = cubic feet / 27. Bags = cubic feet / 2, rounded up to the next whole bag. For example, a 20-by-10-foot bed at 3 inches deep is 200 x 0.25 = 50 cubic feet, or 1.85 cubic yards, which is 25 bags.

Example calculations

Example 1: 20 x 10 bed at 3 inches

The area is 200 square feet. At 3 inches, or 0.25 feet, the volume is 50 cubic feet, which is 1.85 cubic yards. At 2 cubic feet per bag, that is 25 bags exactly.

Example 2: 12 x 4 bed at 2 inches

The area is 48 square feet. At 2 inches, or about 0.167 feet, the volume is 8 cubic feet, or 0.30 cubic yards. That works out to 4 bags of 2 cubic feet.

Example 3: 30 x 10 bed at 4 inches

The area is 300 square feet. At 4 inches, or 0.333 feet, the volume is 100 cubic feet, or 3.70 cubic yards. Bags would be 50, though bulk delivery is usually more practical at that size.

What the result means

Depth drives the estimate more than most people expect, because every inch of depth adds one-twelfth of a foot across the whole bed. Going from 2 to 3 inches increases the volume by half. Bag size also matters: a 2-cubic-foot bag is common, but bags range in size, so check the label and adjust the bag figure if yours differs. Coverage claims on bag labels usually assume a thin layer of 1 or 2 inches, and a 2-cubic-foot bag covers about 8 square feet at 3 inches. Mulch settles over time, and beds with slopes or curved edges need more than a rectangle suggests.

Common mistakes

  • Measuring depth in inches but entering it as feet.
  • Using a single pass across the bed instead of the full area.
  • Forgetting to round bags up and buying a fraction short.
  • Assuming every bag holds 2 cubic feet.
  • Ignoring slopes, curves, or tree wells that add area.

Assumptions and limits

  • The bed is rectangular and roughly level.
  • Depth is uniform across the bed.
  • One bag holds 2 cubic feet.
  • No settling, compaction, or waste allowance is included.
  • Measurements are in feet and depth is in inches.

Frequently asked questions

How many 2-cubic-foot bags are in a cubic yard?

A cubic yard is 27 cubic feet, so it takes 13.5 bags of 2 cubic feet. Buy 14 bags to cover a full cubic yard.

How deep should mulch be?

Two to 3 inches is typical for established beds, and up to 4 inches for new plantings. Deeper layers can hold moisture against stems and reduce airflow.

Is bulk mulch cheaper than bags?

Usually, yes, for large volumes. Bulk also avoids plastic packaging, but delivery fees and minimum orders can offset the savings on small jobs.

Does mulch depth shrink over time?

Yes. Organic mulch breaks down and settles, so beds often need a top-up each year. The calculator gives the volume for one application.

Can I use this for soil or compost?

Yes. The volume math is the same for any loose material sold by the cubic yard. Weight will differ because density differs.

What if my bed is circular?

Measure the diameter, divide by 2 for the radius, and use 3.14 x radius x radius for the area. Then multiply by depth in feet and divide by 27.

Sources

This calculator is a planning estimate only. Bag volumes, bulk delivery minimums, and settling rates vary by product and supplier. Confirm the bag size or bulk quantity before ordering, and follow local guidance on mulch depth near buildings.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Go deeper

Guides that explain the math

Mulch Calculator: Cubic Yards, Depth, and Bag Count
Everyday

Mulch Calculator: Cubic Yards, Depth, and Bag Count

How much mulch you need for a bed, how deep to spread it, and how to convert cubic feet to bags or bulk yards.

5 min read

Calccc Editorial Team · Updated 2026-11-12

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.