What this calculator does
A comfortable stair starts with even risers and a consistent tread. This calculator divides the total rise by your target riser height, rounds up, and recalculates the exact riser height so every step matches. It also works out the number of treads and the total run, the horizontal distance the stair occupies. Building codes set limits on riser height, tread depth, and other details, so treat the output as an estimate and confirm the design with your local building department.
How to use it
- Measure the total rise from the finished lower floor to the finished upper floor.
- Enter your preferred riser height in inches.
- Enter the tread depth you plan to use in inches.
- Review the riser count, actual riser height, tread count, and total run.
How it works
Example calculations
Example 1: 108-inch rise, 7.5-inch target, 10-inch tread
108 / 7.5 = 14.4, which rounds up to 15 risers. The actual riser is 108 / 15 = 7.2 inches, so 14 treads and a total run of 14 x 10 / 12 = 11.67 feet.
Example 2: 96-inch rise, 7-inch target, 10-inch tread
96 / 7 = 13.71, so 14 risers at 96 / 14 = 6.86 inches each. With 13 treads at 10 inches, the total run is 130 / 12 = 10.83 feet.
Example 3: 120-inch rise, 7.5-inch target, 11-inch tread
120 / 7.5 = 16 exactly, so 16 risers at 7.5 inches each. That gives 15 treads and a total run of 15 x 11 / 12 = 13.75 feet.
What the result means
Rounding the riser count up keeps the actual riser at or below your target, and dividing the total rise by the rounded count keeps every step equal. Uneven risers are a common trip hazard, so check each step after installation and adjust as needed. The total run grows directly with tread depth, which is why deep treads feel generous but consume floor space. Local codes commonly limit the riser to about 7-3/4 inches and require a tread of at least 10 inches for residential stairs, but those limits vary by jurisdiction, so verify the rules before cutting stringers. Headroom, landings, and handrails are checked separately.
Common mistakes
- Measuring the rise to the subfloor instead of the finished floor.
- Rounding the riser count down and ending with a riser above the target.
- Using the desired riser height instead of the actual height for layout.
- Ignoring local code limits on riser height and tread depth.
Assumptions and limits
- The total rise is measured between finished floor surfaces.
- All risers are equal and all treads are the same depth.
- The upper floor or landing serves as the final step.
- Nosing, stringer thickness, and headroom are not included.
- The stair is a straight run with no intermediate landing.
Frequently asked questions
Why are there fewer treads than risers?
The top landing replaces the last tread. With 15 risers you step up 15 times but install only 14 treads, because the floor above is the final surface.
What is a comfortable riser height?
About 7 to 7-1/2 inches is common for residential stairs. Shallower risers need more run, and steeper risers save space at the cost of comfort.
How do I measure total rise?
Measure vertically from the finished surface of the lower floor to the finished surface of the upper floor. Include flooring thickness, because it changes the final height.
Does this calculator check building codes?
No. It is a planning tool. Codes limit riser height, tread depth, headroom, and handrails, and they vary by location, so confirm your design with the local building department.
How much floor space will the stair take?
The total run is the horizontal distance from the first riser to the last. Add room for a landing if the stair turns or opens to a hallway.
Can I use this for outdoor deck stairs?
Yes, the math is the same. Outdoor stairs often have different code limits and need a landing, handrail, and weather-resistant materials.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
