Skip to content

Everyday

Electricity Cost Calculator

Enter the appliance's wattage, average hours used per day, your electricity rate in cents per kWh, and the number of days. The calculator estimates daily and period kWh use, total cost, and cost per day. Results are estimates; actual use depends on the appliance, settings, and how often it cycles on.

Updated 2026-11-12 Editorial estimate Calccc Editorial Team Free · No sign-up

Loading calculator…

What this calculator does

This calculator estimates what an appliance costs to run over a set number of days. It converts watts and hours into kilowatt-hours (kWh), then multiplies by your electricity rate. You can use it for a space heater, air conditioner, refrigerator, computer, or any device with a wattage label. The result is a useful planning estimate, but it is not a metered reading. Appliances that cycle, change settings, or use standby power will not match a simple hours-per-day entry exactly.

How to use it

  1. Find the appliance's wattage on its label or manual.
  2. Enter the average hours it runs each day.
  3. Enter your electricity rate in cents per kWh.
  4. Enter the number of days to cover.
  5. Review kWh and cost per day and for the full period.

How it works

kWh per day = watts x hours per day / 1,000. kWh for the period = kWh per day x days. Estimated cost = kWh for the period x rate in cents / 100. Cost per day = estimated cost / days. For example, 1,000 watts running for one hour uses 1 kWh.

Example calculations

Example 1: space heater

1,500 watts for 2 hours a day at 15 cents per kWh for 30 days gives 3 kWh per day, 90 kWh for the period, $13.50 total, and $0.45 per day.

Example 2: fan

60 watts for 5 hours a day at 12 cents per kWh for 30 days gives 0.3 kWh per day, 9 kWh for the period, $1.08 total, and about $0.036 per day.

Example 3: dryer

2,000 watts for 1 hour a day at 20 cents per kWh for 7 days gives 2 kWh per day, 14 kWh for the period, $2.80 total, and $0.40 per day.

What the result means

A wattage label usually shows the maximum power a device draws, not its average use. A refrigerator cycles on and off, a laptop draws different amounts depending on the task, and a heater may run only until the room reaches the set temperature. Standby power, chargers left plugged in, and changing electricity rates can also change the bill. If your rate has tiers, time-of-use pricing, or fixed charges, the cost of one appliance is only part of the story. For a better estimate, use a plug-in power meter or check the device's energy guide. The calculator assumes a constant rate and a steady number of hours. Use the nameplate wattage only as a starting point for a device that runs continuously.

Common mistakes

  • Using the maximum wattage as if the appliance always draws it.
  • Entering minutes instead of hours.
  • Forgetting to divide watts by 1,000.
  • Using a rate that includes taxes or fixed fees inconsistently.
  • Ignoring standby power and cycling.

Assumptions and limits

  • The appliance draws a steady amount of power during the entered hours.
  • The electricity rate is constant in cents per kWh.
  • Hours per day are averaged over the period.
  • The rate excludes fixed charges, taxes, and tier adjustments.

Frequently asked questions

What is a kWh?

It is 1,000 watts used for one hour. It is the unit utilities use to bill electricity.

Where do I find wattage?

Check the label, manual, or power adapter. Some devices list amps and volts instead.

Why is my bill different?

The label may show maximum draw, and cycling, settings, taxes, and fees change actual cost.

How do I convert watts to kWh?

Multiply watts by hours, then divide by 1,000. A 1,500-watt device run for 2 hours uses 3 kWh.

Does standby power count?

Yes, if the device draws power while off or idle. Add those hours or use a power meter.

Can I use this for time-of-use rates?

Only if you use one average rate. Time-of-use pricing needs a separate calculation for each rate period.

Sources

This is an educational estimate, not a utility bill or energy audit. Actual use varies with the appliance, settings, cycling, and your rate structure. Check your utility bill and a power meter for measured costs.

2026 update

How to use the professional output

This page is not just a formula box. The result is designed to be checked, compared, and taken away.

  • Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
  • A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
  • Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.

The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.

Go deeper

Guides that explain the math

Electricity Cost Calculator: Watts, Hours, and Rate
Everyday

Electricity Cost Calculator: Watts, Hours, and Rate

Convert appliance watts into kilowatt-hours, then into dollars using your electricity rate.

5 min read

Calccc Editorial Team · Updated 2026-11-12

Prepared by Calccc Editorial Team as an educational estimate. This page is not a licensed professional review and is not financial, medical, legal, or tax advice.

Editorial estimate prepared by the Calccc Editorial Team; not a licensed professional review.