Key takeaways
- 360° = 2π rad = 400 gon, exactly. All three units measure the same rotation.
- 1 radian is about 57.3°. It is the angle that puts an arc equal to the radius along the circle.
- 1 gon is 0.9°. A right angle is 100 gon, which is why surveying instruments use it.
- Degrees subdivide in base 60. One degree is 60 arcminutes and 3,600 arcseconds.
- Radians are mandatory in calculus. Derivatives and series for trigonometric functions assume them.
The full turn is the anchor
Degrees, radians, and gradians all measure plane angle, and all three agree on one thing: a complete rotation. A turn is 360 degrees, 2π radians, or 400 gradians. Any conversion is therefore a ratio of how many of the source unit fit in a turn against how many of the target unit fit in the same turn.
That ratio method is more reliable than memorizing factors, because it also works for the units that are not on a calculator: arcminutes, arcseconds, NATO mils, or revolutions per minute. Convert to degrees or radians first, then on to the target, and check that the result lands where the geometry says it should. A quarter turn must come out as 90°, π/2, or 100 gon.
Only one of the three is exact in decimal form. Degrees and gradians are rational fractions of a turn; radians involve π, so every degree-to-radian conversion is irrational and must be rounded somewhere.
Degrees, arcminutes, and arcseconds
The degree is 1/360 of a turn, a convention inherited from Babylonian base-60 arithmetic and reinforced by the roughly 360-day year. Each degree divides into 60 arcminutes and each arcminute into 60 arcseconds, written 40°44′12″. Converting that notation to decimal degrees means adding 44/60 and 12/3600 to 40, which gives 40.7367°.
Arcseconds are the working unit of astronomy and of precise surveying because they are small: one arcsecond is 4.848137 × 10⁻⁶ radians. On the Earth’s surface, one arcminute of latitude is about one nautical mile, 1,852 m, and one arcsecond is about 30.9 m. That relationship is why navigators still work in degrees and minutes rather than in decimal degrees.
The notation is easy to misread. “40.44°” is not 40°44′; it is 40.44°, which is 40°26′24″. Software that accepts degrees, minutes, and seconds as separate fields avoids the ambiguity, and spreadsheets that accept a single number usually want decimal degrees.
Radians and why calculus uses them
A radian is the angle subtended at the centre of a circle by an arc equal in length to the radius. Because arc length is s = rθ when θ is in radians, the unit makes rotational geometry a matter of multiplication rather than of carrying a constant. A full circle has circumference 2πr, so a full turn is 2π radians.
Calculus depends on this. The derivative of sin x is cos x only when x is in radians; in degrees a factor of π/180 appears in every derivative and integral. The small-angle approximation sin θ ≈ tan θ ≈ θ likewise holds only in radians, and it is accurate to about 1% up to 0.14 rad, or 8°. Optics, orbital mechanics, and signal processing all work in radians for the same reason.
Practical sizes: 1 radian is 57.2958°, a milliradian is 0.0572958°, and 1° is 17.4533 mrad. A milliradian subtends about 1 mm at 1 m, which is why rifle scopes and laser rangefinders are labelled in mils or mrad. Note that the artillery “mil” is not a milliradian: the NATO mil is 1/6,400 of a turn, or 0.05625°.
Gradians and the surveying tradition
The gradian, also called the gon or grade, divides a turn into 400 parts, so a right angle is 100 gon and one gon is 0.9°. It came out of the same decimal reform movement as the metric system, and it survives because a decimal quadrant is convenient when angles are added and subtracted in the field. Many European total stations and theodolites read in gon, with centesimal minutes and seconds of 100 each.
The unit is not a percentage. A 100% road grade is a 45° slope, while 100 gon is a right angle, and a 10% grade is only 5.71°. Gradians measure rotation; grade percentages measure rise over run. Confusing the two is a common error in civil engineering drawings that carry both.
Conversion is the simplest of the three families: multiply gon by 0.9 to get degrees, or divide degrees by 0.9 to get gon. A 63.662 gon angle is one radian, because 400 gon and 2π radians describe the same turn.
Worked examples
45°. 45/360 = 0.125 of a turn, so it is 0.125 × 2π = 0.785398 rad and 0.125 × 400 = 50 gon. A 45° mitre is 50 gon on a European saw scale.
30°. 30 × π/180 = 0.523599 rad; 30/0.9 = 33.333 gon.
One radian. 180/π = 57.2958°, and 57.2958/0.9 = 63.66198 gon.
Half a radian. 0.5 × 57.2958 = 28.6479°, which is 31.8310 gon.
Surveying. 200 gon is 180°, or π rad. A traverse turned 133.3333 gon has turned 120°.
Small angle. 2.5 mrad is 0.14324°, or 8.594′; at 200 m it subtends 0.5 m.
Where angle conversions go wrong
Calculator mode. A calculator set to radians returns sin(30) = −0.988 instead of 0.5. The mode indicator is small and easy to miss, and the error is not obvious until a result is wildly out of range.
Reading decimal degrees as degrees and minutes. An angle of 1.30° is 1°18′, not 1°30′. The notation 1°30′ is unambiguous; 1.30 is not, unless the convention is stated.
Treating gon as a slope percentage. A 100 gon angle is a right angle, while a 100% grade is a 45° slope. Neither number converts into the other by a factor of 0.9.
Forgetting to wrap. Angles are periodic, so −30° is 330° and 370° is 10°. Software that compares bearings must normalise first, or a 1° difference can look like 359°.
Rounding π too early. Using 3.14 instead of π introduces a 0.05% error, which is 0.18° over a full turn and about half a metre per kilometre of arc.
Rounding and precision by context
Navigation works to 0.1 arcminute, about 185 m, because that is roughly the precision of a hand bearing. Astronomy quotes arcseconds and milliarcseconds, where 1″ is 4.85 µrad. Surveying in gon typically reports four decimal places, which is 0.0001 gon, or 0.324″. Classroom geometry is happy with three significant figures, so 45° becomes 0.785 rad and 1 rad becomes 57.3°.
Round at the end, not in the middle. Converting degrees to gon and then to radians through a rounded intermediate value can shift the last digit; converting directly through the turn ratio avoids the double rounding. State the unit in every answer, because 0.785 alone could be radians, a fraction of a turn, or something else entirely.
Frequently asked questions
How many degrees are in a radian?
57.2957795°. The exact value is 180/π.
How many radians are in a degree?
0.0174532925 rad, which is π/180.
What is a gradian in degrees?
0.9°. A full turn is 400 gon, so 100 gon is a right angle and 200 gon is a straight line.
Why are there 360 degrees in a circle?
It is a convention from Babylonian astronomy, convenient because 360 has many divisors. It is not derived from any physical constant.
How do I convert degrees, minutes, and seconds to decimal degrees?
Decimal = degrees + minutes/60 + seconds/3,600. For 40°44′12″: 40 + 0.7333 + 0.0033 = 40.7367°.
Do spreadsheets use radians or degrees?
Excel and Google Sheets trigonometric functions use radians. Use RADIANS() and DEGREES() to convert, and check the result of any formula that mixes the two.
Further reading
Keep exploring
Decision path